H-Bot and Core XY
![C3DO](https://openbuilds.com/data/article_images/l/5/5957.jpg?t=1511666318)
Build Author
crypt-tek
Views
32291
C3DO
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278338
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
![GridBot Two: Powerfully Simple](https://openbuilds.com/data/article_images/l/9/9144.jpg?t=1580061310)
Build Author
SOA
Views
58151
GridBot Two: Powerfully Simple
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.
Double D-Bot 400mm x 400mm x 600mm
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
![Core-XY Cube](https://openbuilds.com/data/article_images/l/3/3536.jpg?t=1465995594)
Build Author
alan richard
Views
45696
Core-XY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
D-BOT With Mods
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
What a way to learn about 3D printing
![OpenXY](https://openbuilds.com/data/article_images/l/2/2911.jpg?t=1448854520)
Build Author
Keith Davis
Views
28881
OpenXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Large 'Double H-Bot' using Openbuilds 2040 v-slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
CoreXY W/ Fixed Build Plate & Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a Core XY printer with a fixed build plate from off the shelf parts.
![CoreXY - e3d inspired](https://openbuilds.com/data/article_images/l/7/7021.jpg?t=1525161852)
Build Author
j0achim
Views
11070
CoreXY - e3d inspired
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY printer heavily inspired by e3d's new open source printer with tool changing. I intend to make it so when e3d start selling toolheads these can be added to the machine without any major work having to be done.
![Rat Rig V-Core 3D Printer ( Core XY )](https://openbuilds.com/data/article_images/l/7/7364.jpg?t=1531822676)
Build Author
Rat Rig
Views
28584
Rat Rig V-Core 3D Printer ( Core XY )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Fully OpenBuilds based Core XY printer design by Rat Rig. CAD files, build manual, build videos available!
TITANXY (Fixed Build Plate, Quad Z Screw, CoreXY)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super Rigid CoreXY 3D Printer
DIY Ultimaker
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This design should give the same performance as the high speed Ultimaker since it uses a similar ultra-light X/Y concept which eliminates any movement of both the X and Y motors to achieve X/Y travel.
![BeTrue3D Printer](https://openbuilds.com/data/article_images/l/4/4306.jpg?t=1485199929)
Build Author
BeTrue3D
Views
20173
BeTrue3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
![V-King CoreXY](https://openbuilds.com/data/article_images/l/7/7699.jpg?t=1539181070)
Build Author
Roy Berntsen
Views
23589
V-King CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
V-King CoreXY 3d Printer- 380*340*340 Build volume - All wheels on V-Slots - Belts on XYZ - High quality and controlled design - Proven fast, reliable and it is all open source
CoreXY Enclosed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A compact, enclosed Core XY design, based on off-the-shelf parts.
V-Baby CoreXY - Quality Engineered DIY 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Easy to build - affordable opensource DIY CoreXY 3d Printer for fast reliable prototyping on your desktop - All wheels and V-Slots for smooth quick moves and opensource firmware on 8 or 32 bit controllers
G&C Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
![(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in](https://openbuilds.com/data/article_images/l/6/6205.jpg?t=1515766125)
Build Author
nc3dpw
Views
20685
(Portable) Large Format 3d Printer 4ft square frame. Build Volume 36in x 36in x 36in
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large format printer build based off successful small Corexy. I figured it could be scaled to large format and be portable. Portable meaning by removing a few pieces it could effectively be rotated out of a standard door frame.
Hurricane - Large 80cm x 80cm x 80cm cm build space project
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Huge - Fast - Affordable
![crypt-cube](https://openbuilds.com/data/article_images/l/8/8354.jpg?t=1613674363)
Build Author
crypt-tek
Views
8893
crypt-cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The crypt-cube is another project I've been working on off and on over the past year, unlike my previous built C3DO this is a much smaller built with a volume of 318mm x 240mm x 220mm. With this build my main focus is precision and speed.
Ultra MegaMax Dominator CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My self-designed and built, tall-format coreXY printer with 300 x 300 x695 mm print capacity.
![CoreCube3D - A CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/8/8109.jpg?t=1546581339)
Build Author
CoreCube3D
Views
18782
CoreCube3D - A CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
CoreXY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXY cube with 600x600x800 volume.
BAFP 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A New Core XY Printer build. BAFP stands for Big And Fast Printer. It will be awesome !!
Hlidskjalf, CoreXYU (dual X-carriage)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.
SCoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off. Today done some electronics. Looks ok. https://youtu.be/ls_tl54ruE0
CoreXY Cubish
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
![Tesseract](https://openbuilds.com/data/article_images/l/2/2791.jpg?t=1445528517)
Build Author
JCPhlux
Views
24236
Tesseract
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large Core XY 3d Printer W/fixed build plate
![H-Bot CoreXY Cube with Fixed Build Plate](https://openbuilds.com/data/article_images/l/1/1985.jpg?t=1429646626)
Build Author
TomH
Views
15277
H-Bot CoreXY Cube with Fixed Build Plate
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
TesseractXY (MendelMax 1.5 version)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
History about making 3d printer.
H-Bot CoreXY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Dead build.
![SolidCore CoreXY 3D Printer](https://openbuilds.com/data/article_images/l/9/9334.jpg?t=1588996964)
Build Author
shanehooper
Views
12528
SolidCore CoreXY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular and Scalable CoreXY Printer with all metal parts.
MOJO 3D
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Fast, Large build area, CoreXY design
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Tower Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Tower Printer H-Belt type printer Prototype
DPR-v2 full metal
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
pictures and mony doku see later
Mini D-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.
Rob's D-Bot Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The plan is to make this a fairly stock D-Bot build. We'll see if mods start creeping in.
Kraken Core-XY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Core-XY build witha quad nozzle
Mushu - Large Scale CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
20x26x28 inch Build Volume CoreXY. Unlike many builds, I've decoupled the XY movements from the Z-Axis lead screws to help prevent Wobble, will be using linear guide rails, and mains powered bed heater, and a bed that is Allowed to thermally grow. This build is JUST narrow enough to fit through a standard sized doorway.
![LayerFused X301 - CoreXY Large Volume Printer](https://openbuilds.com/data/article_images/l/9/9491.jpg?t=1598379323)
Build Author
Robert Mech
Views
7767
LayerFused X301 - CoreXY Large Volume Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
V-rex , Low cost CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Easy to build,low-cost, CoreXY
SolidCore CoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
All metal CoreXY 3D Printer Design with triple z, kinematic bed, and scalable corexy mechanism.
![ME - Core XY 3d printer](https://openbuilds.com/data/article_images/l/10/10228.jpg?t=1645120787)
Build Author
Edgar Mata
Views
20090
ME - Core XY 3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted to make my own Voron, so I made my own Voron,
All Metal - CoreXY Motion
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stacked CoreXY Motion System using only Openbuilds components
V5- 2in1 ( 3dPrint+laser Engraving )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
2in1 ( 3dPrint+laser Engraving )
Core XY Beast
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super solid core xy build inspired by the e3d tool changer
Gauthali V2.0 DIY 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is based on core XY kinematics. First of all, we designed a CAD model. Most of the required parts are designed by us in solidworks software, and some parts are downloaded from a web platform ‘grabcad’. After that we assembled those parts and inspected them in solidworks. The designed CAD models are frame of 470mmX392mmX545mm SBR linear guide rod, linear guide holder, lead screw, motor mounts, pulley, bed mount, idler block, timing belt clamper.
![CoreXY - Tower Printer](https://openbuilds.com/data/article_images/l/6/6126.jpg?t=1515197272)
Build Author
Terone Burgenheim
Views
5430
CoreXY - Tower Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I wanted to try a different way of operating the Z Axis so I setup a tower using 40x40. In the end it worked excellently and can easily print 60mm/s with 150mm/s travels. The coreXY is a very cool kinematic, and you can get some pretty great speed and accuracy. The main issue is the fact your Steps/mm are doubled, so the lower end motors don't like it at high speeds.
![Kaarbble Nylon Bot](https://openbuilds.com/data/article_images/l/2/2787.jpg?t=1447151001)
Build Author
Kaarbble
Views
9486
Kaarbble Nylon Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
We plan experiment on nylon 3 D printing;
InDoreXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.
The Artist Formerly Known as Prints
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Work in progress large volume CoreXY printer
Double trolley X and Z belt training
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Total belt drive GT2
![RepRap Intro](https://openbuilds.com/data/article_images/l/3/3096.jpg?t=1454272289)
Build Author
Nwrgordon
Views
14523
RepRap Intro
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An easy Epic Win for novice engineers new to the RepRap project www.3distributed.com
Openbuilds D-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A humble first time attempt at building a 3d printer from scratch
Core XY My-BOT 500 x 500 x 1000
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first construction after many years buys ready devices.
Genesis XZ
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
CoreXZ implementation on 3d printer using Openbuild and RobotDigg parts.
D-Bot Version B
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
D-Bot with a Replicate controller.
XYZ Factory Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.
Phoenix Alpha
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Hobby project
CORE XY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.
D-Bot CoreXY printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A CoreXY D-Bot 3d printer using gantries as wheel-carriages.
betterBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
First CoreXY Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
First CoreXY. Simple Square build, hopes for faster movements.
![3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle](https://openbuilds.com/data/article_images/l/3/3664.jpg?t=1467563767)
Build Author
boubouexpress
Views
10343
3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
sparkcube V1.1XL edit V-slot mini v linear
![PowerBot](https://openbuilds.com/data/article_images/l/4/4227.jpg?t=1481589023)
Build Author
Power Playground
Views
3904
PowerBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.
![2020 First build.](https://openbuilds.com/data/article_images/l/4/4989.jpg?t=1500598962)
Build Author
THE LINK
Views
4260
2020 First build.
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Probably cheapest DIY build youl see.
![Zorkbot](https://openbuilds.com/data/article_images/l/2/2140.jpg?t=1431624364)
Build Author
Anglesachse
Views
8133
Zorkbot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Corexy, with possible head change (3d, cnc, laser)
Core XY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Just now in the planning phase of my build. Waiting for some parts to come in to see what I am going to build off of. Print area going to be close to 300x300x350. Trying to decide if I want it enclosed. I do want to print ABS... so probably so.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)