Build List
-
Active Filters:
slot
![OpenBuilds OX CNC Machine](https://openbuilds.com/data/article_images/l/0/341.jpg?t=1391561605)
Build Author
Mark Carew
Views
1161132
OpenBuilds OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138718
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![Indie i2](https://openbuilds.com/data/article_images/l/1/1976.jpg?t=1467535954)
Build Author
Indieflow
Views
110120
Indie i2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278337
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
![C-Beam® Machine - Plate Maker](https://openbuilds.com/data/article_images/l/2/2020.jpg?t=1529678249)
Build Author
Mark Carew
Views
253542
C-Beam® Machine - Plate Maker
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
ROUTY CNC Router (V-Slot Belt & Pinion)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
![Maximus 3D Printer](https://openbuilds.com/data/article_images/l/0/952.jpg?t=1406983407)
Build Author
mytechno3d
Views
64028
Maximus 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30444
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
Dragon Plasma cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you
Delta-Six
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super rigid Delta printer, using 20X40 V-Slot
Beefed-up and customized OX build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
![Sphinx XL](https://openbuilds.com/data/article_images/l/4/4141.jpg?t=1507417836)
Build Author
beardyblair
Views
24126
Sphinx XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
![LS-LASER](https://openbuilds.com/data/article_images/l/7/7304.jpg?t=1532805578)
Build Author
LukasK
Views
21497
LS-LASER
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
I have completed some custom build 3d printers (i3 and delta style) and a cnc mill based on v-slot and c-beam. From the beginning the cnc was built to fit/change between router, 5w led laser module and plotter pen. While all three works great, the build is primarily focused on heavy duty milling and brings some disadvantages when it comes to laser - slow because of leadscrew motion system and not as powerful because of “only” led laser. That is why I have started this build of co2 laser machine.
![A simple XY laser engraver/cutter](https://openbuilds.com/data/article_images/l/4/4034.jpg?t=1487416994)
Build Author
HPB
Views
40394
A simple XY laser engraver/cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15086
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
![Maximus Evolution (Still another XL 3D Printer )](https://openbuilds.com/data/article_images/l/2/2563.jpg?t=1441899245)
Build Author
mytechno3d
Views
26811
Maximus Evolution (Still another XL 3D Printer )
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Maximus Evolution : 380mm x 400mm XL 3D Printer
Solid basics CNC router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
![Router / plasma cutting table ( Rack and pinion )](https://openbuilds.com/data/article_images/l/8/8838.jpg?t=1572632620)
Build Author
mytechno3d
Views
24291
Router / plasma cutting table ( Rack and pinion )
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Heavy DIY plasma cutting table
![3D Printer](https://openbuilds.com/data/article_images/l/0/225.jpg?t=1389473508)
Build Author
Cuong Vu
Views
31918
3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
It took me 18 long nights to build it
![Ooznest OX CNC Machine](https://openbuilds.com/data/article_images/l/2/2084.jpg?t=1468952479)
Build Author
Ryan Lock
Views
129638
Ooznest OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
![Core-XY Cube](https://openbuilds.com/data/article_images/l/3/3536.jpg?t=1465995594)
Build Author
alan richard
Views
45691
Core-XY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
![WorkBee CNC Machine](https://openbuilds.com/data/article_images/l/5/5626.jpg?t=1505419208)
Build Author
Ryan Lock
Views
124571
WorkBee CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
![openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)](https://openbuilds.com/data/article_images/l/1/1001.jpg?t=1408972700)
Build Author
openhardwarecoza
Views
71657
openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
DIY Lasercutter: Budget orientated, medium sized (60-100w), safety first, based on Lasersaur software toolchain
![MakerSL MSL-5 Cantilevered 3D Printer](https://openbuilds.com/data/article_images/l/3/3179.jpg?t=1466722048)
Build Author
Sonny Lowe
Views
29690
MakerSL MSL-5 Cantilevered 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Inspired by the Crawlbot
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Building a couple of CNC's based on the Crawlbot
Large 'Double H-Bot' using Openbuilds 2040 v-slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
![UltiBots CB3030 CNC Router](https://openbuilds.com/data/article_images/l/3/3597.jpg?t=1467332619)
Build Author
UltiBots
Views
34619
UltiBots CB3030 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
![Plasma cutting table](https://openbuilds.com/data/article_images/l/3/3528.jpg?t=1465474923)
Build Author
mytechno3d
Views
33818
Plasma cutting table
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
![Sphinx 1050](https://openbuilds.com/data/article_images/l/7/7822.jpg?t=1543130548)
Build Author
Kyo
Views
31370
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
![Co2 Laser Cutter/Engraver Rotary Attachment](https://openbuilds.com/data/article_images/l/8/8239.jpg?t=1549271771)
Build Author
pedrofernandez
Views
16094
Co2 Laser Cutter/Engraver Rotary Attachment
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
![Simple Cnc System (arduino Grbl)](https://openbuilds.com/data/article_images/l/8/8474.jpg?t=1556544699)
Build Author
viktop
Views
21127
Simple Cnc System (arduino Grbl)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
![X Y Table OpenRail / V-Slot Build Examples](https://openbuilds.com/data/article_images/l/0/62.jpg?t=1389473342)
Build Author
Mark Carew
Views
67617
X Y Table OpenRail / V-Slot Build Examples
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
![YAOR (Yet Another Openbuilds Router)](https://openbuilds.com/data/article_images/l/0/825.jpg?t=1401483549)
Build Author
winand
Views
16893
YAOR (Yet Another Openbuilds Router)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Openbuilds Router, my version :-)
![V-Slot™ Belt & Pinion Example Build](https://openbuilds.com/data/article_images/l/0/97.jpg?t=1389473395)
Build Author
Mark Carew
Views
80744
V-Slot™ Belt & Pinion Example Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
V-Slot Miter Saw Stop
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A quick and simple saw stop build.
![Cut To Length Machine](https://openbuilds.com/data/article_images/l/1/1749.jpg?t=1423405435)
Build Author
mytechno3d
Views
14671
Cut To Length Machine
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A Cut To Length machine controlled by computer
The Laserbox
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A low cost and easy to build laser cutter based on 2.8w laser diode .
![Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)](https://openbuilds.com/data/article_images/l/8/8485.jpg?t=1567627790)
Build Author
viktop
Views
15872
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX-inspired mini desktop mill.
C-Beam XL with Aluminum Bed
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL with v-slot aluminum bed for fixturing.
![BF3D OX (Big Freakin' 3D OX)](https://openbuilds.com/data/article_images/l/4/4498.jpg?t=1496452101)
Build Author
Bud Griffin
Views
10597
BF3D OX (Big Freakin' 3D OX)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is my latest printer build. The second printer I've built using V-Slot.
Hedge trimmer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This is a machine to trim and horizontal cutting hedges.
![The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build](https://openbuilds.com/data/article_images/l/2/2815.jpg?t=1453269930)
Build Author
Peter Oakes
Views
41417
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
C-Beam Machine XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.
![DSLR Video Slider](https://openbuilds.com/data/article_images/l/0/535.jpg?t=1409501345)
Build Author
Rob Taylor
Views
24765
DSLR Video Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
![Z FLoating head for Plasma cutting (OX CNC compatible)](https://openbuilds.com/data/article_images/l/7/7695.jpg?t=1539069969)
Build Author
mytechno3d
Views
12962
Z FLoating head for Plasma cutting (OX CNC compatible)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
How to convert your OX CNC to a plasma cutter at low cost
![1000mm X 1500mm OX CNC -- Fiber/Garolite](https://openbuilds.com/data/article_images/l/1/1289.jpg?t=1414951188)
Build Author
SlyClockWerkz
Views
15723
1000mm X 1500mm OX CNC -- Fiber/Garolite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building the full size OX.
![Stinger Laser](https://openbuilds.com/data/article_images/l/4/4877.jpg?t=1491777619)
Build Author
Kyo
Views
14171
Stinger Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
3-Axis CNC Laser Engraver running grbl 1.1 in laser mode and Laserweb4.
![Vox Solid State](https://openbuilds.com/data/article_images/l/6/6030.jpg?t=1513689971)
Build Author
CharlieShimota
Views
14355
Vox Solid State
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
![BinaryConstruct V3](https://openbuilds.com/data/article_images/l/6/6740.jpg?t=1519873489)
Build Author
BinaryConstruct
Views
9004
BinaryConstruct V3
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This printer is a design that has evolved over three years. The original goals of this project were to design a rigid printer that had a large print volume, 300mm^3, with easily sources parts and a minimum of complicated printed parts.
Ultra MegaMax Dominator CoreXY Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My self-designed and built, tall-format coreXY printer with 300 x 300 x695 mm print capacity.
![Griffin Delta Printer](https://openbuilds.com/data/article_images/l/0/580.jpg?t=1394102731)
Build Author
Sheepdog
Views
25326
Griffin Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.
![M Cubed CNC Mill](https://openbuilds.com/data/article_images/l/1/1634.jpg?t=1421382482)
Build Author
M^3
Views
20491
M Cubed CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A no-nonsense CNC mini mill to get the job done.
![Archer - An extendable all metal 3D printer](https://openbuilds.com/data/article_images/l/3/3539.jpg?t=1468604303)
Build Author
James Archer
Views
12174
Archer - An extendable all metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
![The MakerSL Customized OB Minimill](https://openbuilds.com/data/article_images/l/3/3647.jpg?t=1498037174)
Build Author
Sonny Lowe
Views
5987
The MakerSL Customized OB Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
![V-Slot Hand Cutting Jig](https://openbuilds.com/data/article_images/l/5/5796.jpg?t=1508932950)
Build Author
pek
Views
5121
V-Slot Hand Cutting Jig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
To help cutting v-slots with hand saw
![V-Slot™ Mini V Linear Actuator](https://openbuilds.com/data/article_images/l/0/48.jpg?t=1444073092)
Build Author
Mark Carew
Views
88178
V-Slot™ Mini V Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
Cheetah 1.1 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I hope to have a working prototype built soon.
plasma cnc
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Homemade plasma cnc
![V-Slot Laser cutter and engraver](https://openbuilds.com/data/article_images/l/2/2617.jpg?t=1442812649)
Build Author
Yoshiya Arii
Views
38996
V-Slot Laser cutter and engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
Draw bot core xy
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
In the design stage. Help guide.
![+Laser](https://openbuilds.com/data/article_images/l/7/7097.jpg?t=1525413539)
Build Author
BNMaker
Views
9913
+Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
![V-Slot SphereBot](https://openbuilds.com/data/article_images/l/0/57.jpg?t=1389473428)
Build Author
Mark Carew
Views
47317
V-Slot SphereBot
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
This SphereBot is based on the EggBot which is an open-source art robot (drawbot) that can draw on spherical or egg-shaped objects.
![C-Beam™ Linear Actuator](https://openbuilds.com/data/article_images/l/1/1955.jpg?t=1443543394)
Build Author
Mark Carew
Views
117801
C-Beam™ Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
![Machined Aluminum MagBall Carriages](https://openbuilds.com/data/article_images/l/3/3538.jpg?t=1465670195)
Build Author
UltiBots
Views
9538
Machined Aluminum MagBall Carriages
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Machined Aluminum MagBall Carriages
Sphinx 55 with 3D Printed Addons
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.
![Openbuilds CNC (witthuhnCNC XKLBR-1S)](https://openbuilds.com/data/article_images/l/9/9231.jpg?t=1582637850)
Build Author
Kenneth Witthuhn
Views
7362
Openbuilds CNC (witthuhnCNC XKLBR-1S)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.
Vulcan: 750x1200 V slot 90W Co2 Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Tried to get best value and minimal footprint!
![V-Slot® NEMA 17 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/0/80.jpg?t=1444071466)
Build Author
Mark Carew
Views
119946
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
![Emmett-Delta](https://openbuilds.com/data/article_images/l/3/3052.jpg?t=1452293030)
Build Author
David Bunch
Views
13661
Emmett-Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.
Archivist Quill Book Scanner
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is a book scanner built out of aluminum extrusion. It is designed to get high quality scans without harming the book. It is not automated. You still have to turn the pages yourself.
![3d nika](https://openbuilds.com/data/article_images/l/3/3663.jpg?t=1467561272)
Build Author
griso
Views
8111
3d nika
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
![DSLR ( video ) motorized slider](https://openbuilds.com/data/article_images/l/3/3869.jpg?t=1471675578)
Build Author
mytechno3d
Views
5688
DSLR ( video ) motorized slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
In order to make some nice traveling video you need a slider .
![Plate Maker V-slot Table](https://openbuilds.com/data/article_images/l/5/5876.jpg?t=1510340593)
Build Author
Kyo
Views
8524
Plate Maker V-slot Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
![V-Slot Ventilator](https://openbuilds.com/data/article_images/l/9/9309.jpg?t=1587332585)
Build Author
OpenBuilds
Views
5453
V-Slot Ventilator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
Vslot Kossel
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Base is a Delta Kossel Printer modified to be build with openbuild parts like vslot 20x40 , pulley .... It inclued the latest modification for auto level : FSR
![Angus : A Slightly](https://openbuilds.com/data/article_images/l/1/1305.jpg?t=1415256336)
Build Author
Nugz
Views
12492
Angus : A Slightly "Beefier" OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
![YAOP (Yet Another Openbuilds Printer)](https://openbuilds.com/data/article_images/l/1/1493.jpg?t=1418414947)
Build Author
winand
Views
15588
YAOP (Yet Another Openbuilds Printer)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Yet Another Openbuilds Printer, my version :-P
![H-Bot CoreXY Cube with Fixed Build Plate](https://openbuilds.com/data/article_images/l/1/1985.jpg?t=1429646626)
Build Author
TomH
Views
15274
H-Bot CoreXY Cube with Fixed Build Plate
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
![V-Slot Cutting System](https://openbuilds.com/data/article_images/l/2/2138.jpg?t=1431475871)
Build Author
Kyo
Views
11226
V-Slot Cutting System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
![Tesseract](https://openbuilds.com/data/article_images/l/2/2791.jpg?t=1445528517)
Build Author
JCPhlux
Views
24230
Tesseract
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large Core XY 3d Printer W/fixed build plate
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
4916
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Versabot - All metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.
![V-Slot Modular Sit/Stand Desk](https://openbuilds.com/data/article_images/l/1/1615.jpg?t=1421190050)
Build Author
Mark Carew
Views
17415
V-Slot Modular Sit/Stand Desk
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
![Metal MagBall Carriage](https://openbuilds.com/data/article_images/l/3/3071.jpg?t=1453052515)
Build Author
UltiBots
Views
12652
Metal MagBall Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
UltiBots LLC designs and packages DeltaBot 3D printers using quality components. Our kits are V-Slot based. Print results are impressive. The Metal MagBall Carriage was designed to be ridged, compact, and simple.
![OpenBuilds C-Beam Double Slider](https://openbuilds.com/data/article_images/l/3/3462.jpg?t=1463761241)
Build Author
cbordeleau
Views
11534
OpenBuilds C-Beam Double Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
V-Slot Linear Actuator Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
v-slot linear actuator build.
C beam machine (with larger T-slot platform)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Larger, more rigid build plate C beam machine
![C-Beam - Sphinx 1000x1000mm inspired by Kyo](https://openbuilds.com/data/article_images/l/6/6611.jpg?t=1519313313)
Build Author
spark2
Views
4376
C-Beam - Sphinx 1000x1000mm inspired by Kyo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
DPR-v2 full metal
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
pictures and mony doku see later
![Mining Rig](https://openbuilds.com/data/article_images/l/7/7201.jpg?t=1529396612)
Build Author
mytechno3d
Views
4245
Mining Rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Crypto Mining rigs with vslot rail
![40x40 V-Slot Rod Type Linear Actuator](https://openbuilds.com/data/article_images/l/9/9196.jpg?t=1581687266)
Build Author
Martin.Barfoed
Views
5078
40x40 V-Slot Rod Type Linear Actuator
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
A Rod-type Linear Actuator based on the 40x40 V-slot profile
![OpenBuilds Enclosure Series](https://openbuilds.com/data/article_images/l/9/9535.jpg?t=1606859634)
Build Author
OpenBuilds
Views
25126
OpenBuilds Enclosure Series
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/314.jpg?t=1529428714)
Easy to build series of enclosures for all your CNC needs!
![V-Slot™ X -Y Stage Hidden Acme Rod Example](https://openbuilds.com/data/article_images/l/0/66.jpg?t=1389473440)
Build Author
Mark Carew
Views
51410
V-Slot™ X -Y Stage Hidden Acme Rod Example
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
![RoboFoamCutter](https://openbuilds.com/data/article_images/l/0/505.jpg?t=1391725995)
Build Author
Colin Russon
Views
7753
RoboFoamCutter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
spunks.cam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Design of a multifunctional CNC machine.
![Aluminum Ox](https://openbuilds.com/data/article_cat_images/l/0/286.jpg?t=0)
Build Author
richthorn
Views
7513
Aluminum Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
NCS P3-v Steel with 12X12 Build area
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
A large 12x12x12 build area sturdy printer made of steel
![C-Beam Evolution MkII](https://openbuilds.com/data/article_images/l/4/4419.jpg?t=1494575087)
Build Author
mikev
Views
7455
C-Beam Evolution MkII
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
![FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router](https://openbuilds.com/data/article_images/l/8/8127.jpg?t=1547436481)
Build Author
Jay Almers
Views
6389
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)