Build List
-
Active Filters:
min
![C-Beam® Machine - Plate Maker](https://openbuilds.com/data/article_images/l/2/2020.jpg?t=1529678249)
Build Author
Mark Carew
Views
253541
C-Beam® Machine - Plate Maker
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
23053
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
![7050 Sphinx](https://openbuilds.com/data/article_images/l/5/5331.jpg?t=1520298636)
Build Author
Michael.M
Views
36358
7050 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
![Core-XY Cube](https://openbuilds.com/data/article_images/l/3/3536.jpg?t=1465995594)
Build Author
alan richard
Views
45690
Core-XY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
![OpenBuilds MiniMill](https://openbuilds.com/data/article_images/l/5/5087.jpg?t=1543859341)
Build Author
Mark Carew
Views
141362
OpenBuilds MiniMill
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
![Openbuilds rovo laser mini(오픈빌드)](https://openbuilds.com/data/article_images/l/2/2095.jpg?t=1430628083)
Build Author
inhan
Views
19824
Openbuilds rovo laser mini(오픈빌드)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
MiniMill Z Axis Upgrade with Offset Motor
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgrade your Minimill with an off-set Z Axis Motor
![Simple Cnc System (arduino Grbl)](https://openbuilds.com/data/article_images/l/8/8474.jpg?t=1556544699)
Build Author
viktop
Views
21127
Simple Cnc System (arduino Grbl)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
![BldrBot S2](https://openbuilds.com/data/article_images/l/0/632.jpg?t=1580431332)
Build Author
Keith Davis
Views
17902
BldrBot S2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Prusa i3 design running on Open Build's mini V wheels
![M Cubed CNC Mill](https://openbuilds.com/data/article_images/l/1/1634.jpg?t=1421382482)
Build Author
M^3
Views
20491
M Cubed CNC Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A no-nonsense CNC mini mill to get the job done.
![openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)](https://openbuilds.com/data/article_images/l/1/1657.jpg?t=1422099227)
Build Author
openhardwarecoza
Views
27094
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
![The MakerSL Customized OB Minimill](https://openbuilds.com/data/article_images/l/3/3647.jpg?t=1498037174)
Build Author
Sonny Lowe
Views
5987
The MakerSL Customized OB Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18149
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
![Vacuum Forming Machine](https://openbuilds.com/data/article_images/l/5/5071.jpg?t=1495496199)
Build Author
rengelking
Views
29541
Vacuum Forming Machine
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Vacuum Former built with off-the-shelf parts, works perfectly every time!
![A custom arcade](https://openbuilds.com/data/article_images/l/9/9379.jpg?t=1592581616)
Build Author
ajdubs
Views
3508
A custom arcade
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This is an arcade "cabinet" of sorts built almost entirely from OpenBuilds extrusions. Save for a few 3d printed parts, the electrical components, the acrylic panels, and the monitor mount, every component was purchased from the OpenBuilds part store.
![C-Beam Mini Mite](https://openbuilds.com/data/article_images/l/10/10001.jpg?t=1625194826)
Build Author
Rick 2.0
Views
14815
C-Beam Mini Mite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
BldrBox
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
OpenBuilds box type printer using min-v-wheels for X & Y axis. Designed for plexiglas panel enclosure of build area.
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6672
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
Rex
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
![Printer1](https://openbuilds.com/data/article_images/l/3/3452.jpg?t=1463474495)
Build Author
andrizzle
Views
5884
Printer1
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
![Archer - An extendable all metal 3D printer](https://openbuilds.com/data/article_images/l/3/3539.jpg?t=1468604303)
Build Author
James Archer
Views
12174
Archer - An extendable all metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
MiniMill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Building a small mill to match my 7x12 lathe.
![MakerSL MSL-8 OB Vise](https://openbuilds.com/data/article_images/l/4/4084.jpg?t=1478073275)
Build Author
Sonny Lowe
Views
15086
MakerSL MSL-8 OB Vise
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Small Machining Vise designed around 20x80 Openbuilds Rail System
![CRH C-BEAM Router, steel capable](https://openbuilds.com/data/article_images/l/4/4663.jpg?t=1488314646)
Build Author
chenderson
Views
11242
CRH C-BEAM Router, steel capable
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam based CNC router using mostly openbuilds parts.
MakerSL MSL-21 OB Minimill Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Simple enclosure for the OB Minimill
![MiniMill Smoothie](https://openbuilds.com/data/article_images/l/5/5293.jpg?t=1503798101)
Build Author
Andrew Helsel
Views
11016
MiniMill Smoothie
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
MiniMill with DW611 and SmoothieBoard 4x v1.1
MMXL - A MiniMill Conversion
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".
Yamm (Yet another MiniMill)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First time CNC user having a good time with a MiniMill
![Modular DIY CNC Machine](https://openbuilds.com/data/article_images/l/6/6140.jpg?t=1516590691)
Build Author
jtaggard
Views
32536
Modular DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
Horizontal MiniMill (x5)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The search for an affordable hobby 5 axis machine.
![D&R Tiger Paw build combo](https://openbuilds.com/data/article_images/l/6/6856.jpg?t=1550455582)
Build Author
Lasersc
Views
9442
D&R Tiger Paw build combo
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8202
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![+Laser](https://openbuilds.com/data/article_images/l/7/7097.jpg?t=1525413539)
Build Author
BNMaker
Views
9913
+Laser
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A minimalist 2-axis A2 sized laser diode cutter/engraver. Designed to give the most function using the very least number of parts at the lowest price.
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
77049
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
![OpenBuilds Sphinx 55 (20](https://openbuilds.com/data/article_images/l/7/7197.jpg?t=1529019228)
Build Author
Mark Carew
Views
47606
OpenBuilds Sphinx 55 (20" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
![Mining Rig](https://openbuilds.com/data/article_images/l/7/7201.jpg?t=1529396612)
Build Author
mytechno3d
Views
4245
Mining Rig
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Crypto Mining rigs with vslot rail
![Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019](https://openbuilds.com/data/article_images/l/8/8288.jpg?t=1553609218)
Build Author
obmilllivebuild
Views
10440
Live OpenBuilds MiniMill -> MiniPrint/Laser Conversion Demo @ MRRF2019
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Transformation of an OpenBuilds Mini Mill into a convertible 3D printer / CNC mill with interchangeable tooling. Maybe a bonus conversion TBD.
Large 'Double H-Bot' using Openbuilds 2040 v-slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The aim of this design is to build a simple, cost effective (under $1000) and relatively compact large volume (m3) 3D printer that will use a pellet extruder to create art/design objects using shredded recycled plastics.
![Frezar - Desktop CNC](https://openbuilds.com/data/article_images/l/8/8719.jpg?t=1563670637)
Build Author
Fábio Pires
Views
6011
Frezar - Desktop CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
![The D & R TigerPaw Trilogy](https://openbuilds.com/data/article_images/l/8/8729.jpg?t=1564161580)
Build Author
Lasersc
Views
3777
The D & R TigerPaw Trilogy
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
Minimalist Laser Platform
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Minimalist laser platform built with Makerlink connectors and modified Nema 17 stepper mounts used as gantry plates.
![45W CO2 Laser Build](https://openbuilds.com/data/article_images/l/9/9025.jpg?t=1623328241)
Build Author
wackocrash5150
Views
17359
45W CO2 Laser Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.
![Racoon CNC](https://openbuilds.com/data/article_images/l/9/9623.jpg?t=1605312916)
Build Author
Stokrotka74
Views
5705
Racoon CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
![Rigid Compact Desktop C-BEAM](https://openbuilds.com/data/article_images/l/9/9887.jpg?t=1617382213)
Build Author
nickchnv
Views
10144
Rigid Compact Desktop C-BEAM
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modified C-Beam, is a compact, powerful and affordable desktop CNC.
![Modular Desktop Vacuum Former](https://openbuilds.com/data/article_images/l/10/10098.jpg?t=1636207085)
Build Author
lekey
Views
6742
Modular Desktop Vacuum Former
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.
![LEGO BOX](https://openbuilds.com/data/article_images/l/10/10457.jpg?t=1687254602)
Build Author
Damian V-SLOT Poland
Views
2069
LEGO BOX
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Discover our unique DIY project that blends creativity, utility, and sustainability. This guide will take you through the construction of a LEGO display box, ingeniously crafted using offcuts of V-SLOT aluminium profiles and OpenBuilds accessories. Not only is this an eco-friendly approach to reusing surplus materials, but it also results in a stylish, functional display for your prized LEGO models. Whether you're a LEGO enthusiast or have little LEGO fans at home, this innovative project offers
![Ooznest OX CNC Machine](https://openbuilds.com/data/article_images/l/2/2084.jpg?t=1468952479)
Build Author
Ryan Lock
Views
129636
Ooznest OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
![Indie i2](https://openbuilds.com/data/article_images/l/1/1976.jpg?t=1467535954)
Build Author
Indieflow
Views
110120
Indie i2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
![C-Beam XL - TinyG - Aluminium Plate - Dewalt 611](https://openbuilds.com/data/article_images/l/4/4285.jpg?t=1485886261)
Build Author
jamesdjadams
Views
11198
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL build using TinyG V8.
![Sphinx rigid XL](https://openbuilds.com/data/article_images/l/4/4903.jpg?t=1492143643)
Build Author
Apothus
Views
20951
Sphinx rigid XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Rigid variant of the C-Beam sphinx platform
![My first 3D printer: Absolute3Dr](https://openbuilds.com/data/article_images/l/1/1484.jpg?t=1418138932)
Build Author
Philippe Bergeron
Views
9240
My first 3D printer: Absolute3Dr
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
You are about to read the evolution of my 3d Printer build.
![Was once a mini mill](https://openbuilds.com/data/article_images/l/7/7328.jpg?t=1531492528)
Build Author
dreys
Views
10223
Was once a mini mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Working progress.
Desktop CNC machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Stable solid, hope can cooperate with coolant in the future.
Mini lathe CNC Conversion - Work in progress
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1389472486)
My on going build of CNC Mini Lathe
![V-Slot™ Mini V Linear Actuator](https://openbuilds.com/data/article_images/l/0/48.jpg?t=1444073092)
Build Author
Mark Carew
Views
88177
V-Slot™ Mini V Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
![Foldable Rainwater Collector](https://openbuilds.com/data/article_images/l/0/931.jpg?t=1403768751)
Build Author
Mohsen Abbasi
Views
7679
Foldable Rainwater Collector
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.
Versabot - All metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.
![First 3d build](https://openbuilds.com/data/article_images/l/1/1269.jpg?t=1418732417)
Build Author
jjcolletta
Views
10272
First 3d build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.
Aluminium OX - Canada
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Document my OX build process. I will also be sharing SolidWorks parts files & assemblies.
Aluminium Router From Dubai
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another modification on the OX
![BABE - CanUSA Blue OX, bigger than the average OX](https://openbuilds.com/data/article_images/l/2/2030.jpg?t=1429841265)
Build Author
Donald D. Parker
Views
4864
BABE - CanUSA Blue OX, bigger than the average OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a basic description of my OX-like build of Babe, Paul Bunyan's Blue Ox. It is a work in progress. The idea has been germinating for about 4 years, with several twists and turns and false starts along the way.
Screaming Ox CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Big brother of the Charging Ox CNC machine.
Water Buffalo - Water jet cut OX+
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified OX based on Aluminum plates cut on a waterjet. Some new ideas and additions from other builds are included.
Kossel Mini Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
This is a Chinese kit I got on ebay from someone in CA.
![Slider Levelling Platform](https://openbuilds.com/data/article_images/l/3/3410.jpg?t=1461326970)
Build Author
cbordeleau
Views
5240
Slider Levelling Platform
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
3d printed V-Slot Gantry Plate leveler.
![OpenBuilds C-Beam Double Slider](https://openbuilds.com/data/article_images/l/3/3462.jpg?t=1463761241)
Build Author
cbordeleau
Views
11533
OpenBuilds C-Beam Double Slider
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
![Matt's Ox](https://openbuilds.com/data/article_images/l/3/3494.jpg?t=1469028178)
Build Author
Matt Nelson
Views
11295
Matt's Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
![3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle](https://openbuilds.com/data/article_images/l/3/3664.jpg?t=1467563767)
Build Author
boubouexpress
Views
10342
3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
sparkcube V1.1XL edit V-slot mini v linear
3D printer inspired by the Bukito
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.
C-Beam XL with Aluminum Bed
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL with v-slot aluminum bed for fixturing.
![Sheethexapod](https://openbuilds.com/data/article_images/l/4/4220.jpg?t=1481407627)
Build Author
Edgar Robles
Views
3264
Sheethexapod
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
![C-Beam Evolution MkII](https://openbuilds.com/data/article_images/l/4/4419.jpg?t=1494575087)
Build Author
mikev
Views
7455
C-Beam Evolution MkII
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
My 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
A DIY 3D printer. At beginning made from aluminium profiles, aluminium sheet and wood :)
![Panther 3D printer](https://openbuilds.com/data/article_images/l/4/4577.jpg?t=1568965395)
Build Author
taratata2016
Views
6856
Panther 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3
![CoreXY 3D build one](https://openbuilds.com/data/article_images/l/4/4874.jpg?t=1569010665)
Build Author
recoush
Views
7526
CoreXY 3D build one
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
![3D Printer on Prusa architecture with best parts available](https://openbuilds.com/data/article_images/l/5/5081.jpg?t=1495781202)
Build Author
evgeny156
Views
6379
3D Printer on Prusa architecture with best parts available
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Wanna quet an nice looking device done by my hands
MiniMill - A must have machine :)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The new MiniMill from Mark and Sonny is a great little machine.
Extendable Mini Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Another MiniMill, different to the OpenBuilds version and potentially more flexible because of the design.
![islahcnc&design](https://openbuilds.com/data/article_images/l/5/5278.jpg?t=1499502646)
Build Author
islahcnc
Views
3836
islahcnc&design
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
I will post soon some more details.
Stargeezer Vertimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Next up will be the electronics package. My parts bins are overflowing with boards so this may be the hardest decision to make of the entire build.
![Mobile bed cnc machine, first build](https://openbuilds.com/data/article_images/l/5/5584.jpg?t=1504802428)
Build Author
Jason Harding
Views
3157
Mobile bed cnc machine, first build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.
OB Minimill with bottom frame PSU+Drivers
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
All-in-one OB Minimill
My MiniMill is just the start
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first build and I've been waiting to do this for a very long time.
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
![Plate Maker V-slot Table](https://openbuilds.com/data/article_images/l/5/5876.jpg?t=1510340593)
Build Author
Kyo
Views
8524
Plate Maker V-slot Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
![CNC Mini Mill Build](https://openbuilds.com/data/article_images/l/6/6068.jpg?t=1514513004)
Build Author
Lindsey Lewis
Views
6530
CNC Mini Mill Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
CNC Mini Mill build with some mods after following standard build on Youtube video.
![Another Sphinx 7550 Made by an Openbuilds Cbeam](https://openbuilds.com/data/article_images/l/6/6091.jpg?t=1521945969)
Build Author
pedrofernandez
Views
10591
Another Sphinx 7550 Made by an Openbuilds Cbeam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
![Arizona OpenBuilds MiniMill CNC](https://openbuilds.com/data/article_images/l/6/6092.jpg?t=1514846826)
Build Author
ZacharyB
Views
4544
Arizona OpenBuilds MiniMill CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
![Mini-Mill Enhanced](https://openbuilds.com/data/article_images/l/6/6467.jpg?t=1518387588)
Build Author
Rob Withoff
Views
3814
Mini-Mill Enhanced
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some enhancements of the basic mini-mill
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
14751
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
Joe's Minimill Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I put this together to cut aluminum. Chips get everywhere! Cover your lead screws. Put the mill inside an enclosure. DON'T mount electronics (especially the power supply) inside the enclosure, chips will get into it and short it out. Remove the manual jog wheels, they contribute to chatter (something about having a mass on the end of the lead screw causes vibration). I cut at 14000 RPM, 0.05 inch width of cut, 0.05 inch depth of cut, 30 inches per minute and just barely avoid chatter.
![Fourth Axis Mill Prototype](https://openbuilds.com/data/article_images/l/6/6730.jpg?t=1519842519)
Build Author
Blyn3D
Views
5250
Fourth Axis Mill Prototype
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
I really like the 4th axis I purchased a few years back, but when I went looking for it again the suppliers who once carried it no longer do. Anyone know who makes it? Center hole receives collets. I own a ShopSmith so I am using a 5/8th rod and can mount it's chucks onto this machine. Also I like the use of the skateboard wheels, they are adjustable and one could use more sets over a longer axis. The Sherline z-axis is not my first choice, I just had a spare.
Minimill with slight modifications and v-slot table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a slightly-modified OpenBuilds minimill with some more Y travel and a v-slot table.
Big-X Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Minimill bundle, but with an extended X Axis
![OpenBuilds Sphinx 1050 (20](https://openbuilds.com/data/article_images/l/7/7196.jpg?t=1529007338)
Build Author
Mark Carew
Views
29153
OpenBuilds Sphinx 1050 (20" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
![OpenBuilds Workbee 1010 (40](https://openbuilds.com/data/article_images/l/7/7198.jpg?t=1529023423)
Build Author
Mark Carew
Views
68957
OpenBuilds Workbee 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
![OpenBuilds Workbee 1050 (40](https://openbuilds.com/data/article_images/l/7/7199.jpg?t=1529026299)
Build Author
Mark Carew
Views
24481
OpenBuilds Workbee 1050 (40" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
4915
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Butterfly 3DP V 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
tronxy x3 like
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)