Recent Activity
Activity stream for all registered members at OpenBuilds.
-
Mark Carew liked Alex Chambers's post in the thread OpenBuilds just opened a brand new location!.
YES! use this post processor :- docs:software:fusion360 [OpenBuilds Documentation] Alex.
Jun 10, 2024 at 10:48 AM -
Rick 2.0 replied to the thread Custom Acro Size ?.
The wires should be long enough as they typically come in a stock length which you have to cut down. Something to verify with the shop...
Jun 10, 2024 at 10:37 AM -
David the swarfer replied to the thread Grbl Solid Handshaking.
comments cannot contain anything but plain text (as stated in the Wiki) , and no embedded comments so (this is a comment (with a sub...
Jun 10, 2024 at 3:25 AM -
David the swarfer replied to the thread cant cut circles?.
I am confused now (probably just failing to visualize what you said). To draw a circle X and Y must both slow down, stop, and spin the...
Jun 10, 2024 at 3:09 AM -
Rick 2.0 replied to the thread Custom Acro Size ?.
OpenBuilds ACRO 1010 40" x 40" - OpenBuilds Part Store should do the trick for you. Work area is 800 x 800 so you'd really only need to...
Jun 9, 2024 at 9:17 PM -
Rick 2.0 replied to the thread Custom Acro Size ?.
Yes, and if you work out the lengths the shop will generally cut them for you. Just leave a note in the comment section when you order it.
Jun 9, 2024 at 6:45 PM -
David the swarfer replied to the thread DIY large CNC mill - How to start ?.
where to start? buy a LEAD 1010 kit, build it, and operate it for a month or two. With this experience of an actual CNC machine you...
Jun 9, 2024 at 9:34 AM -
David the swarfer liked brrian's post in the thread inverter RPM dropping during operation.
My Blackbox (original) died - a sudden disconnect and a slight smell of burnt electronics. It's worked reliably for years, & it was just...
Jun 9, 2024 at 9:31 AM -
David the swarfer replied to the thread cant cut circles?.
nothing wrong with the gcode you posted. if the machine is not following the code then I believe it is getting stuck, either in X or Y,...
Jun 9, 2024 at 9:28 AM -
David the swarfer replied to the thread Clarification of Fusion Pierce Height.
if that equates to a reset, then yes, that will cause a new home position
Jun 9, 2024 at 9:19 AM -
David the swarfer liked T-rav's post in the thread Clarification of Fusion Pierce Height.
This is awesome! Before I made this post, I googled all these commands to "see" what was going on and I'm happy to see that my notes...
Jun 9, 2024 at 9:18 AM -
David the swarfer liked T-rav's post in the thread Clarification of Fusion Pierce Height.
I'm tracking on this too now! I saw that the override Pierce Height in the Post is another option to set Pierce Height. I'll continue...
Jun 9, 2024 at 9:18 AM -
Giarc attached a file to the thread cant cut circles?.
Can you upload the gcode file for us to look at? Have you ran it in a gcode simulator to see if it looks like it should work? Here is...
Jun 8, 2024 at 6:14 PM
-
Giarc replied to the thread OpenBuilds CONTROL Software.
Connecting Grbl [IMG]
Jun 8, 2024 at 6:09 PM -
Giarc attached a file to the thread economical 3d carving?.
Vcarve Desktop will make machining stl files so easy. I absolutely love it. It is pricey, but you keep the software for ever unlike...
Jun 8, 2024 at 6:07 PM