Build List
-
Active Filters:
cnc
Plasma CNC machine
The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.
Build Author DaleShaw Views 3354
Senior Project CNC table
So for my senior project I decided to build a CNC router. I kind of need to get this done before May so we'll see what all goes down. It's going to be a 3 axis machine (for now) and will be able to handle 4x8 sheets of wood. This is my first build. It's going to be intresting..
Build Author David Florian Views 8211
Dual Extruders 3D Printer - Zidex Upgraded
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
Build Author Darren Dickson Views 2998
3D printed CNC Machine
So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.
Build Author Neil Scott Views 1850
Barcelona Build
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
Build Author Mark Carew Views 139443
OpenBuilds MiniMill
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author Mark Carew Views 46852
OpenBuilds Sphinx 55 (20" x 20")
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
Build Author Mark Carew Views 28669
OpenBuilds Sphinx 1050 (20" x 40")
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
PhlatMDF48
Building a Phlat based CNC for MDF processing. Capacity of 48" x unlimited length.
Build Author Vunnie Views 5644
Workbee CNC on steroids
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
Build Author Mark Carew Views 73090
BlackBox Motion Control System
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
Build Author Mark Carew Views 27949
High Z Mod for Lead CNC
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
Build Author Mark Carew Views 57111
V-Slot NEMA 23 Linear Actuator (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author Mark Carew Views 18539
V-Slot™ Nema 23 Linear Actuator (Belt Driven)
This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.
Build Author Mark Carew Views 19347
C-Beam® XLarge Linear Actuator
This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community
Build Author Mark Carew Views 24146
OpenBuilds Workbee 1050 (40" x 20")
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
Build Author Mark Carew Views 68007
OpenBuilds Workbee 1010 (40" x 40")
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
cnc vreesbank 2500x30000
This cnc milling machine is 3 meters by 30 meters,
Build Author MattR Views 14445
Fixed Gantry CNC Router with Old Industrial Supplies
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
Build Author mjenkins5720 Views 1887
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author mytechno3d Views 33560
Plasma cutting table
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
BKE Lead 1010 - First CNC Router
LEAD CNC
Cnc Mill using standard and 3d printed cimponents
I used the cad designs for the c beam to find a solution to my initial sourcing problem. I figured that I could use 2x 20x20 and 1x 20x80 Profil to create a c beam actuator. I sourced all of the profiles from a local machin builder and t-nuts and screws in my local hardware store. Some parts are currently in 3d printed pla for testing reasons.
Build Author viktop Views 15558
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
An OX-inspired mini desktop mill.
Build Author Sir Bagels Views 1985
CNC Auto-pipette
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
Build Author Lasersc Views 3618
The D & R TigerPaw Trilogy
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
CNC Router Machine
CNC Router with working area 550*550*200
SB Plotter
Large floor or wall mounted plotter design.
EOX v2
Upgrading my CNC router to run on ball screws. Me and the belts where not getting along.
Build Author KronBjorn Views 3522
WorkBee Lead 1010, Reduced Footprint, Nema17
This is a WorkBee 1000x1000mm with lead screws and Nema17's. It has a reduced footprint, with the geared Nema's inside the frame.
Cnc od grinder and thread grinder
This is a totally original build of an od id grinder and thread grinder, I hope.
DIY CNC Machine
In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.
INDY-TR12 CNC (12mm Diameter Lead Screws)
TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.
Cnc mill, Plasma cutting and weld table
A functional table for plasma cutting, welding, tooling........
Open source large format CNC-machine and 3D printer
For a schoolproject we decided to build this large format CNC-machine. The greatest part of the mechanics were sourced from OpenBuilds.
3D printed Laser Engraver
i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area
Yet Another LEAD CNC Build
My take on the LEAD CNC build. Followed the instructions and I think it came together very nicely. Added a few of my own touches to finish up the build.
Lead CNC build, Mansfield, Texas - BUILD COMPLETED WITH REVIEW OF THE KIT
The machine is a stock Lead CNC, with the Black Box controller and StepperOnline 269oz NEMA 23 motors. I'll be using the DeWalt 611 from Openbuilds, as well.
Build Author CharlieShimota Views 14215
Vox Solid State
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
Build Author Scott Martinez Views 9989
The Growler
This machine is a heavy duty, moving gantry style CNC router. It uses Teknic ClearPath servo motors driving ballscrews and linear rails. The machine has 36" x 48" x 19" of travel with about 7" of clearance below the gantry.
Build Author Lasersc Views 9327
D&R Tiger Paw build combo
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
OoozNest WorkBee
A Journey on the WorkBee Build...
Build Author Christian James Views 7196
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Build Author msdosfx Views 4997
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Ballmasters 1605 1500x1000 ox cnc
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
CNC Router Overhaul
This will be a complete overhaul of this router with some cool modifications.
Build Author TurfnSurf Views 5661
DIY C-Beam CNC
Theoretical Working Area: 360x360x75mm Actual Working Area: 300x300x75mm Will Update Later
Sphinx 55 with 3D Printed Addons
This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably other parts as they come up.
Build Author Doug Rowley Views 3335
My Workbee 1010
This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.
Build Author Spark Concepts Views 4266
MPG Jog Controller for CNC xPRO
Been playing around with an MPG Jogwheel
Build Author Jacob Lotter Views 21855
1510 Workbee Modified
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Build Author Jacob Lotter Views 4004
CNC ESS Controls System
My Controls box to run my Workbee 1510 That was retrofitted with Lead Screws as well as Lineal Bearings. The stock electrical configuration was not enough, so here are the Measures that I took to not only make this machine Run again, but to have fun with it, and make this system be able to run any CNC I run in the future with the installed microcontroller.
Build Author joetemus Views 5200
Shapeoko 2 Z-Axis Upgrade
This is a major redesign to the Z-axis of an otherwise stock Shapeoko 2.
Build Author Savvas Views 16401
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Shapeoko 2 - my first CNC
This was my first foray into CNC. I chose to go with a reliable kit build since my knowledge of GCode, controllers, and steppers was pretty rudimentary.
Build Author Rob Taylor Views 15565
Portable Diode Laser Cutter
Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.
Sphinx 7575
Sphinx CNC modified to 750mm x 750mm c-beams. Parts not readily available in South Africa, so i have to make some modifications...
Build Author Michael.M Views 60267
GRANITE 1.0
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
OXmill
Small Mill type CNC machine, using C-Beams and V-Slot rail, bundle packs as a starter point. I needed a smallish desktop machine to fit a pretty narrow use case for my business, but the machine itself has larger applications to the OB community. Currently I will run the Dewalt 611 router on the Z axis, but have plans to add in a brushless RC style motor. So this design does have room to go either way easily.
Build Author Spark Concepts Views 13097
CNC xPRO V4
Take your build to the next level with the CNC xPRO V4!
Build Author Troy Proffitt Views 23473
Sphinx Upgraded plates / ballscrews and linear rail
Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews
Mostly Printed Cartesian CNC
This is a build that is just getting started. Not all of the parts are ordered or printed as of 5/27/2018. Hopefully in the next few weeks all parts will be printed and most parts ordered.
Build Author Joe Young Views 4327
Goliath - CNC + 3D printer Hybrid
Mostly for Mill work, and FDM 3D printing (mostly Nylonx). I'm currently in the process of adding some hardware for a project requiring lathe work. I've included a solidworks 2014 pack and go for those of you interested in the build. if you need another file type, just let me know and i can try to accommodate. This is a scratch build (electronics and hardware)... see photos. Everything is pretty close to industrial quality... Electronics too. I got sick of other COTS designs breaking down
Portable Sphinx 1050
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
Build Author Kyo Views 29755
Sphinx 1050
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
Sphinx 1050
Openbuilds 1050 Sphinx. Thank you to Mark Carew for trading me a set of plates for a spindle and PSU I was not using. Mark is a champ!
Build Author Bikes and Beer Views 3690
The Forever Project
Workbee 1010 Lead Screw with water cooled spindle and enclosure
Build Author Craig Hollabaugh Views 3431
Hyatt and My Journey to Tonehenge
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
Brice's CNC Router Build
I'm building a CNC router for a long time. Here's the result on this long journee. I tried to do my best with the basic tools I have. Don't hesitate to ask if you have questions.
Build Author Vin1027 Views 5999
C-Beam Sphinx
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
ECNCML (budget mashup)
This build summarizes my CNC milling and laser engraving machine conversion from a dimensional lumber frame and electrical mess to an all aluminum frame with a safe and well constructed (IMHO) control system with the resources I had available.
Another OX CNC Router
An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.
LaserShark300
300x300 belt drive laser etching/cutting platform. The design was borrowed from another's blog and customized to fit materials on-hand. Was a very fun project to assemble.
Build Author RobFromLDMS Views 3904
Lithgow Mens Shed CNC build
The tale of how we put together our CNC Router, and some of the difficulties encountered. It is now ready for final testing and commissioning.
WorkBee 1510 - First CNC Build
This build will go through the construction of a WorkBee 1510 kit from the OpenBuilds Part Store, all mechanical and electrical components were purchased from the store in late October 2018.
Workbee CNC 1500
Trying to build a machine of atleast 4x4ft working area. Work is in progress, hope to finish it soon
Starting my build 2.8mx1.4m
Starting my cnc router, laser and plasma using aluminium 80x80
Build Author MikieLikesIt Views 7359
Cousin CNC OX Router
A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.
Build Author Savvas Views 13186
Halloumi CNC Machine - Acetal Plates
I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.
Build Author Jones Views 2749
The Domino - 1.5m x 1m
DIY scratch build consisting of gas pipe, skate bearings, 12mm birch, 3/4 maple v-core ply, Nema 23's, and arduino and CNC shield with DRV8825's.
Build Author Rob Taylor Views 8754
Grizzly G0758 Benchtop Mill Conversion
A proper CNC mill conversion. But quite small, with my trademark idiosyncracies.
Build Author Andreas Bockert Views 10304
Sphinx Z-axis upgrade
Upgraded Z-axis for Sphinx-style CNC using ball screws and linear rails.
Build Author mytechno3d Views 12689
Z FLoating head for Plasma cutting (OX CNC compatible)
How to convert your OX CNC to a plasma cutter at low cost
Build Author Ryan Lock Views 128844
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author T4Concepts Views 70241
WorkBee CNC build - My honest opinion, tips and help
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
HandCrafted WorkBee - HCWB
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
Build Author pedrofernandez Views 10422
Another Sphinx 7550 Made by an Openbuilds Cbeam
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
Build Author Kyo Views 137878
C-beam Sphinx
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author jpjoshua Views 10465
Arduino Grbl Laser CNC
Arduino powered Laser CNC using GRBl firmware.
LimpyCNC
Inpired by the OpenBuilds OX and PrintrBot Crawlbot. This is the LimpyCNC. It's still a work-in-progress. But it provides a 120x120cm work space without using up 150x150cm of garage space.
Build Author roadss Views 22796
Rawcnc 1.5 Desktop Edition
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
1200X600 SPHINX
Need cnc to make alumunium sign, brass stamp, etc
Large format plasma ox
I will update this as I go, cad files upon request. My x beam is basically a belt driven r7
Voxel Evolution
This is a remix of Marshal Peck's Voxel OX, with some design tweaks inspired by Makerparts and jjcolletta. It has a build area of 300mm X 300mm X 480mm, but is easily configured for just about any build area up to 500mm X 500mm X 750mm. I have used some laser cut acrylic plates and a couple of 3D printed parts in its construction, however it can be assembled using nothing but OpenBuilds parts with the exception of the heated bed and the Y axis carrier for the heated bed.
1075 Sphinx
My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.
Build Author Mark Carew Views 32280
PhlatPrinter MK 3
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
Build Author Michael.M Views 35208
7050 Sphinx
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
Plasma CNC, 4'6" × 8'8" v0318
A plasma table able to cut 4'6" x 8'8" sheet. Low cost as possible.
Solid basics CNC router
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
Build Author TurfnSurf Views 4890
3-Axis Plywood CNC
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm