3D PRINTER BUILDS
FLSUN Kossel 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A brief write up of the making of the FLSUN Delta Kit. This kit is based on an open source design. I had a need for a 3D printer without the desire to dive into another project, so a kit was the obvious way to go. I already have a delta printer in the works and so this is more of a stop gap in the interim.
![1.4 meter tall build height, 300x410mm build plate cartesian](https://openbuilds.com/data/article_images/l/4/4797.jpg?t=1490545360)
Build Author
J-Wahl Dezign
Views
8208
1.4 meter tall build height, 300x410mm build plate cartesian
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
3D PrintBot 500x500x500
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Large scale True 500x500x500 build volume 3D printer.
![Schreibotics Fabricator MkII](https://openbuilds.com/data/article_images/l/4/4907.jpg?t=1492181380)
Build Author
nschreiber0813
Views
4653
Schreibotics Fabricator MkII
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
It all started after my prusa i3 build inspired me to experiment with resin 3D printers because I want to learn if they are worth it and if I can design my own printer.
![Triple C-Bot](https://openbuilds.com/data/article_images/l/1/1757.jpg?t=1439584213)
Build Author
adamcooks
Views
41919
Triple C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
STEAM Machine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Simple design with a large build volume - 450x450x450
![M3Delta](https://openbuilds.com/data/article_images/l/1/1022.jpg?t=1409236449)
Build Author
Limine3D
Views
20718
M3Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta printer designed in sketchup and includes an adjustable bed.
Makerparts.ca Prusa i3Pro 300
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Concept for a Prusa i3 made from Cbeam Extrusion. X & Y using GT2 Belts, Z using Acme Screws Goal is to build a simple. and very Solid Printer Single Z Motor to keep the Z Screws in Sync. (Might require Geared Nema 17) 12" x 12" x 12" Build volume Nema 17's
The Artist Formerly Known as Prints
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Work in progress large volume CoreXY printer
Live D-bot build at MRRF 2017 (Mar 25-26)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Openbuilds D-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A humble first time attempt at building a 3d printer from scratch
Talos3D
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
In Greek mythology, Talos (/ˈteɪlɒs/;[1] Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.
Double trolley X and Z belt training
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Total belt drive GT2
Rex
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
![Server Rack Printer](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
Dmknerr
Views
4163
Server Rack Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first project build. Concept build to use an existing 7.5 ft tall server rack as the frame. This ptoject may never be completed.
3D Printed Solid - Large Format Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I need a large build plate without spending 10-20k for a "store" built printer.
My 1st Build - Delta Printer with 3 filament hot end
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The build area will be fully enclosed. I anticipate using primarily ABS, and have interest in the soluble support materials as well. The main components to date include: OPENBUILDS - 3 x C-Beam™ Linear Actuator Bundle, 1000 mm, w/ Included NEMA23 Motor) Extruders (3) - [Sintron] 1.75mm Mini All Metal MK8 Extruder Hot End - reprap diamond Control board - RUMBA Stepper drivers - DRV8825 StepStick Power supply - eTopxizu 12v 30a
blackcat3d printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......
KALΔIS OPEN SLA
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Modular easy to adjust scale of the entire build Tablet/LCD monitor SLA 3d Printer.
![MULIMATERIAL 3D PRINTER (in progress)](https://openbuilds.com/data/article_images/l/3/3449.jpg?t=1463382525)
Build Author
Keteland
Views
9766
MULIMATERIAL 3D PRINTER (in progress)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build
BAFP 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A New Core XY Printer build. BAFP stands for Big And Fast Printer. It will be awesome !!
3D printer inspired by the Bukito
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
I have been working on this project for something like 3 years on and off, sometimes leaving it for a few months. Now I really want to finish it. For me, the mechanical part was the easy (though long) part because I get to use about 17 CNC machines and MasterCAM and I am a machinist. The hard part is the electronics part. Had a few problems getting Windows to communicate to the X5 Mini via the USB cable but found something on the Smoothie forum and got the machine moving.
delta 3d printer kit
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
HE3D K200 kit build
Large 3D printer 12"x12"x12" with heated bed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I want to have a printer to support senior projects. Also working on supporting 3D printing needs in the local community.
Large Delta Printer made from scrap 80/20
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This printer will leverage scrap pieces around the shop to fulfill a single print's needs. It will use a combination of 80/20, OpenBuilds, and 3D printed parts.
Old Faithful...FDM/CNC machine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I've owned some pretty unreliable printers, and I'll leave it at that... This design comes from the need to have a 3D printer that is reliable, period. I didn't have the money for a several thousand dollar 3d printer with an equivalent build area so that was out of the question. Plus as a fledgling Engineer, I really wanted to blood myself on a project. And that's how Old Faithful came to be. A simple, reliable, rigid, durable machine. Made by me :) Also, it'll be tough enough for light CNC.
betterBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
![1500mmx500mm Kossel Delta](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
TouchPadKing
Views
4183
1500mmx500mm Kossel Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...
![Budget 1500mm OpenBuilds V-Slot Deltabot Build](https://openbuilds.com/data/article_images/l/4/4396.jpg?t=1485280967)
Build Author
dodgenet
Views
5480
Budget 1500mm OpenBuilds V-Slot Deltabot Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Hlidskjalf, CoreXYU (dual X-carriage)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.
Another 3D Printer using OpenBuilds Hardware only
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A light 3D printer made of OpenBuilds hardware only
![PowerBot](https://openbuilds.com/data/article_images/l/4/4227.jpg?t=1481589023)
Build Author
Power Playground
Views
3863
PowerBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.
![My first 3D printer: Absolute3Dr](https://openbuilds.com/data/article_images/l/1/1484.jpg?t=1418138932)
Build Author
Philippe Bergeron
Views
9199
My first 3D printer: Absolute3Dr
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
You are about to read the evolution of my 3d Printer build.
![Maximus 3D Printer](https://openbuilds.com/data/article_images/l/0/952.jpg?t=1406983407)
Build Author
mytechno3d
Views
63911
Maximus 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com
Roberta Clementine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The Roberta Clementine a proof of concept and progenitor to the series of printers I will be calling the Clementine Sisters. The printer is named after Pittsburgh Pirates baseball player Roberto Clemente. Although it is more accurate to say the printer is named after the school I work for which is named after Clemente the Roberto Clemente Charter School. http://www.myrccs.com Roberta is the first and not really built to last but instead built to test ideas and to produce the parts for successors
![Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)](https://openbuilds.com/data/article_images/l/3/3576.jpg?t=1466396648)
Build Author
Tim Pierce
Views
12416
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
![Kaarbble Nylon Bot](https://openbuilds.com/data/article_images/l/2/2787.jpg?t=1447151001)
Build Author
Kaarbble
Views
9458
Kaarbble Nylon Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
We plan experiment on nylon 3 D printing;
Adamantine
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is Adamantine, a all aluminum lead screw driven 3d printer. I wanted to have a printer that would not be effected by the heat or humidity I have here as my current wood frame printer is.
![mBOX](https://openbuilds.com/data/article_images/l/3/3916.jpg?t=1474807879)
Build Author
Asaku
Views
8677
mBOX
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )
Watercooled 3D printer : Maximus Evo Rev 2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Watercooled 3D printer
![Zorkbot](https://openbuilds.com/data/article_images/l/2/2140.jpg?t=1431624364)
Build Author
Anglesachse
Views
8105
Zorkbot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Corexy, with possible head change (3d, cnc, laser)
![Prusa i3 (Acrylic frame with OB rods)](https://openbuilds.com/data/article_images/l/1/1739.jpg?t=1423287009)
Build Author
dddman
Views
12712
Prusa i3 (Acrylic frame with OB rods)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The Prusa i3 (iteration 3) is the newest and most current 3D Printer design by RepRap Core Developer Prusajr (source: http://reprap.org/wiki/Prusa_i3)
![Rigid Delta](https://openbuilds.com/data/article_images/l/3/3983.jpg?t=1474540310)
Build Author
Simon Rafferty
Views
6501
Rigid Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Rigid Delta Printer using C-Beam screw actuators
V-slot and MDF DeltaBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.
SimplrBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a simple, yet rugged design, weighing only 6 lbs and with 13x13x14" volume with a 8x8x6" build area. While assembly is pretty simple, the small size and rigidity of the design make shipping assembled printers attractive.
Zen3D Atlantis 3D printer, H-Bot mechanics
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
H-Bot mechanics 3D printer. Build volume - 300x300x300mm dimensions: 560x500x500mm
D-Bot CoreXY printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A CoreXY D-Bot 3d printer using gantries as wheel-carriages.
CraneBot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A minimum parts build with belt driven Z-axis.
bertha
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build will hopefully be 18x18x24 build space using RAMPS 1.4 with Marlin firmware. Using NEMA 17 motors and belts to drive the X and Y axis, lead screws for the Z axis. The build plate will be heated with a delrin Y carriage for the glass and heatbed. Z axis motors will be top mounted. Possibly and ATX power supply.
![3d nika](https://openbuilds.com/data/article_images/l/3/3663.jpg?t=1467561272)
Build Author
griso
Views
8069
3d nika
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
![Machined Aluminum MagBall Carriages](https://openbuilds.com/data/article_images/l/3/3538.jpg?t=1465670195)
Build Author
UltiBots
Views
9488
Machined Aluminum MagBall Carriages
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Machined Aluminum MagBall Carriages
Infinite Z Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Currently completely imaginary
XYZ Factory Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.
![3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle](https://openbuilds.com/data/article_images/l/3/3664.jpg?t=1467563767)
Build Author
boubouexpress
Views
10301
3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
sparkcube V1.1XL edit V-slot mini v linear
![Griffin Delta Printer](https://openbuilds.com/data/article_images/l/0/580.jpg?t=1394102731)
Build Author
Sheepdog
Views
25269
Griffin Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.
V Rail 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My version a Cartesian style 3d printer, an attempt to eliminate frame vibration and movement and to use up materials left over from other projects.
![Rackmount + OpenRail](https://openbuilds.com/data/article_images/l/0/601.jpg?t=1395224740)
Build Author
Bobnet
Views
12076
Rackmount + OpenRail
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
OpenRail attached to a 19" rackmount 15U box.
dave's RepStrap
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
PVC foam Core frame made from a Delta facet display. a curb find while walking home.
XDrive 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
XDrive 3d printer, high quality large build volume.
Pelican Case 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A portable 3D Printer that can flat pack into a hard carry case
![Printer1](https://openbuilds.com/data/article_images/l/3/3452.jpg?t=1463474495)
Build Author
andrizzle
Views
5855
Printer1
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
RoStockFAZZ
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My large printer design. 400mm build plate, ~1000mm build height. Most of structure is 8020 but the sliders are V-Rail
Large 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Hello ! This is my very first OpenBuilds build. It's based on the Maximus 3D Printer, published by mytechno3d : good source of inspiration !
![Metal MagBall Carriage](https://openbuilds.com/data/article_images/l/3/3071.jpg?t=1453052515)
Build Author
UltiBots
Views
12580
Metal MagBall Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
UltiBots LLC designs and packages DeltaBot 3D printers using quality components. Our kits are V-Slot based. Print results are impressive. The Metal MagBall Carriage was designed to be ridged, compact, and simple.
![MDF Delta](https://openbuilds.com/data/article_images/l/0/692.jpg?t=1398125258)
Build Author
nicklogan
Views
15209
MDF Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.
MakerSL MSL-6 DLP 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This will be a DLP 3D Printer designed around an Openbuilds Frame and rail system. It will be a collaborated effort between myself and Ben Smith. We will be building two prototypes.
![Folger-Tech Y-Carriage](https://openbuilds.com/data/article_images/l/2/2848.jpg?t=1448208474)
Build Author
Sonny Lowe
Views
9772
Folger-Tech Y-Carriage
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This a redesign of the Folger-Tech Y-Carriage using the Solid V-Wheels, Ball Bearings, the V-Slot Rail System.
BldrBot Pro
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A completely belt driven cartesian design with a center mounted X motor. This is a very compact, rugged design.
Atlas Delta Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The idea here is to build a nice large delta bot from the parts ground on the one builds part store. Other parts that are sources out side of this will be detailed. I have a simple BOM I started that I will upload later.
Delta 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a Delta build using 1610 ballscrews from China
Versabot - All metal 3D printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.
![Big 3d Printer, Big Brown](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
Cbrown330
Views
4494
Big 3d Printer, Big Brown
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a big 609 x 609 x 914 3d pritner with exchangable hot ends and extruders.
![Monster - a multiple material 3D printer with 20](https://openbuilds.com/data/article_images/l/2/2449.jpg?t=1441080761)
Build Author
Mike Andrews
Views
8394
Monster - a multiple material 3D printer with 20"(X) X 14"(Y) X ~20"(Z)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Laut3k derivative that goes for volume and large number of print materials at the same time. Using OpenBuild linear motion systems to get away from belt drives.
![RepRap Intro](https://openbuilds.com/data/article_images/l/3/3096.jpg?t=1454272289)
Build Author
Nwrgordon
Views
14476
RepRap Intro
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An easy Epic Win for novice engineers new to the RepRap project www.3distributed.com
![Fina](https://openbuilds.com/data/article_images/l/2/2126.jpg?t=1431809622)
Build Author
Kyo
Views
9651
Fina
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is Fina; My Lautr3k inspired build.
![3D Printer](https://openbuilds.com/data/article_images/l/0/225.jpg?t=1389473508)
Build Author
Cuong Vu
Views
31747
3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
It took me 18 long nights to build it
Tower Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Tower Printer H-Belt type printer Prototype
![H-Bot CoreXY Cube with Fixed Build Plate](https://openbuilds.com/data/article_images/l/1/1985.jpg?t=1429646626)
Build Author
TomH
Views
15213
H-Bot CoreXY Cube with Fixed Build Plate
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
HAPP Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This 3D Printer is made to provide the most accurate results with the least amount of investment. This Printer is being designed to allow the common user to own a very accurate piece of machinery.
![Kossel 250 V-Slot](https://openbuilds.com/data/article_images/l/1/1058.jpg?t=1410219138)
Build Author
UltiBots
Views
19850
Kossel 250 V-Slot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Delta 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I am going to use this as a build log for my delta 3d printer build. I have access to a MakerBOT to print some of the parts. I am still finishing up a few of the design elements but the idea is to have a rigid unit to eliminate deflection in components and maintain accuracy.
Kossel Mini Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
This is a Chinese kit I got on ebay from someone in CA.
DoubleX
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
This is a Dual X-axis platform.
G&C Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
Taz_Mega
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mega-sized Taz machine. Supports many tools (extrusion, laser, mill, etc) simultaneously.
Dual Extruder 3D Printer and Laser Cutter combo
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Dual extruder 3D printer and laser cutter.
![DutziDelta RepStrap](https://openbuilds.com/data/article_cat_images/l/0/272.jpg?t=0)
Build Author
Fabio Bertuzz
Views
3527
DutziDelta RepStrap
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Fascinated for some time by 3D Printing. Now, after studying countless forum posts, blogs and similiar stuff, i want to Start with my own build. Maybe a bit much but usually i thrive with the challenge.
Black Panther QR
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The QuadRap 3D printer version based on OpenBuilds wheels. Born in https://plus.google.com/u/0/communities/103539262895202172380
STEAM crane printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
The STEAM Crane 3d printer uses the new C-Beam linear rail. It is being developed for an after school / summer camp program for kids. All of the electronics are housed in the base and the wiring is routed down the channels of the c-beam. This is done to contain as much of the loose wiring as possible, hopefully keeping it safer for kids.
![the STD](https://openbuilds.com/data/article_images/l/2/2800.jpg?t=1446020246)
Build Author
Sam Dobbie
Views
6621
the STD
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A fully aluminium printer made from off the shelf components, no printed parts.
![MIY OLY Delta Printer](https://openbuilds.com/data/article_images/l/2/2280.jpg?t=1443637173)
Build Author
KBill
Views
12189
MIY OLY Delta Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Mag arm deltabot with laser cut carriages and connectors.
CoreXY Enclosed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A compact, enclosed Core XY design, based on off-the-shelf parts.
![3D Printer 320x220x200](https://openbuilds.com/data/article_images/l/2/2381.jpg?t=1437294682)
Build Author
openhardwarecoza
Views
8300
3D Printer 320x220x200
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Someone donated a E3D Volcano to me (http://e3d-online.com/Volcano/V6-VOLCANO-POWER-PACK-175-UNIVERSAL-24V) and with a super hotend like that, it feels like a waste to stick it into a small 3D printer. So I decided I want a 320x220mm (XY) machine, 200mm Z is plenty for me
Bob's 3D Printer Kit Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
I have wanted a 3D printer for a while. I had thought to convert my ShapeOko machine to a 3D printer BUT after looking at having to replace the electronics with new and the small form factor. I went looking for a kit which would do what I want. Well I found it. It is the MakerFarm i3v printer.
Delta Bot: Improved DIY 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build the efficient and reliable all metal structure 3D Printer. Improved significantly with new concepts for printers. Great quality and up to 400 mm/s print speed (very fast). Built with heated bed, hybrid bowden suspended extruder, and counterweight (tested printing 21 hours straight with no motors hot). Optional smart controller for computerless printing. Print any kind of thermoplastic.
Ez3D - Phoenix 3D Printer Build
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is my 1st submission to openbuilds.com and my 1st venture into building a 3D Printer. The Phoenix 3d Printer is a kit from Ez3D, a company based out of Colorado, started and backed by successful Kick-starter and IndieGogo campaigns. The Phoenix 3d Printer kit is currently backlogged 10 to 12 weeks which means quite a wait. I will be chronicling my experience with this kit as I get it done.
![Mini Kossel V-Slot 3D Printer](https://openbuilds.com/data/article_images/l/0/720.jpg?t=1401248501)
Build Author
UltiBots
Views
30710
Mini Kossel V-Slot 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
![OB Heavy duty Prusa i3](https://openbuilds.com/data/article_images/l/2/2348.jpg?t=1435896346)
Build Author
Bruno Rivard
Views
6126
OB Heavy duty Prusa i3 "Lunar Injection"
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Hell Yeah
Large Manual 3d Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is the largest printer I have found. It is also the cheapest. The reason is that it is run by hand, without computer or motors or electronics. Put an object on one side and move the 3d pen while tracing the object. Move the z dimension by turning the crank on the lab jack to move the printed copy down a notch. Be creative!
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)