Build List
-
Active Filters:
sketch
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138351
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![Vox Solid State](https://openbuilds.com/data/article_images/l/6/6030.jpg?t=1513689971)
Build Author
CharlieShimota
Views
14299
Vox Solid State
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
![Rob's C-Beam Machine XLarge](https://openbuilds.com/data/article_images/l/6/6456.jpg?t=1518301955)
Build Author
Rob Mahan
Views
11505
Rob's C-Beam Machine XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
![C-Beam Mini Mite](https://openbuilds.com/data/article_images/l/10/10001.jpg?t=1625194826)
Build Author
Rick 2.0
Views
14680
C-Beam Mini Mite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
![M3Delta](https://openbuilds.com/data/article_images/l/1/1022.jpg?t=1409236449)
Build Author
Limine3D
Views
20718
M3Delta
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Delta printer designed in sketchup and includes an adjustable bed.
![Quack Ball](https://openbuilds.com/data/article_images/l/6/6614.jpg?t=1519338061)
Build Author
hbtousa
Views
2283
Quack Ball
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
CNC design (parts named)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This design is previously posted in this area. I downloaded the file in order to customize as I needed. I found that the parts were not identified. I went through the design in an attempt to name the parts and identify them by location.
![Workbee](https://openbuilds.com/data/article_images/l/8/8114.jpg?t=1546590616)
Build Author
Christian James
Views
7351
Workbee "style" 1010 cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)