Build List
-
Active Filters:
cnc
Build Author Lasersc Views 9423
D&R Tiger Paw build combo
The Tiger Paw will be a 1000mm X 500mm Cartesian style CNC with the Minimill attached to the end. It is named the D&R Tiger Paw because my son, Daniel, and myself, Richard, will put this Tiger strong and fast machine together. Our goal is to have a Tiger strong build with a Paw print that wouldn’t take up a huge amount of space in our garage.
CO2 laser
http://www.buildlog.net/sm_laser/drawings.html using this as a baseline.... Going to try and use all or most off the shelf parts.
GrOX (OX based router)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
Build Author Larry_AK Views 9244
MUSK-OX
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
3 Axis MultiTool - 3D printer, CNC Mill and Plasma Cutter
So in short this build is a work in progress; it aims to make a large 3d printer, medium size CNC mill and a small plasma cutter all in one CNC unit.
Build Author Mike Campbell Views 9190
bor 454-D
A large format, modular, rack and pinion build designed around OpenBuilds components.
OX-LX-3D
An OX build - little large than specs and plates 3D printed
Flexible Axis Revolving Tool-holder
Drag knife and pen holder which mounts in spindle collet.
Another (Mostly) Stock OX
For my first Openbuilds project, I decided to put together an OX CNC Router.
Build Author Ryan155 Views 8956
RIGCNC
I made a mill from first principles because I didn't like any of the ones that were out there, More info can be found on the website RigCNC.com
A very affordable CNC routing
In progress CNC, (just design for the momment), I want to get some feedback about the design and the possible flexion of the aluminum profiles chosen
Build Author Rob Taylor Views 8928
Grizzly G0758 Benchtop Mill Conversion
A proper CNC mill conversion. But quite small, with my trademark idiosyncracies.
Arctic Ox CNC Router
This is a cartesian CNC Router build that is based off the OX CNC build by Mark Carew. I am using Spark Concepts CNC xPro controller board and their 400w spindle kit.
OX
My build of the OX kit from SMW3D.com
Powder coated multi CNC Z Axis plasma adapter with Prox.
Powder coated multi CNC Z Axis plasma adapter with Proximity sensor. . It can also hold a 80mm Router head/Spindle as seen in my router build.
Build Author Jesse Jenkins Views 8710
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author Asaku Views 8694
mBOX
Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )
CNC 1000x1000mm C-beam
inspired by http://openbuilds.org/builds/c-beam-sphinx.3605/
The Budget Build
An affordable large CNC machine, that so far has been easy to assemble
Controll Board for CNC Projects
The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.
Build Author Superslinky Views 8616
K40 Laser Build (Major Changes)
Major K40 Laser Mod
(Smaug) 100w 1500x1000mm CNC Laser
Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.
Build Author CNCGear Views 8588
The BlackBee CNC
Ball screw drive, linear rail CNC Kit
Build Author Christer Langley Views 8533
CNC-Solutions Build
My first Build with V-slot
Build Author David Florian Views 8515
Dual Extruders 3D Printer - Zidex Upgraded
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
Build Author Kyo Views 8512
Plate Maker V-slot Table
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
Build Author Maxime Favre Views 8483
SmoothiebrainZ CBeam Machine
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
Build Author Yanou Fishel Views 8386
Beefed up Minimill
A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.
Build Author Michael.M Views 8380
Sphinx Evolution
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
Jim's C-Beam Machine Build
This machine is fantastic. Teamed up with Fusion 360, Inkscape, and GrblPanel, I'm well on my way towards making at least one Christmas gift this year. I had some frustrating times during the build, mainly with getting everything to go together square, but overall it was fun. I can see that I'm going to need to be a bit creative in order to max out the work area for this machine so that I can produce the product I bought it for, but it will be able to do so much more for me as well.
Build Author motopreserve Views 8288
Persnickety Plate Maker
My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...
Plasma Table 006
Fast, inexpensive, near-zero maintenance, and 2+ years of near-daily use.
Build Author Colin Russon Views 8154
OX / X3 CNC / Similar Z axis / 1605 Linear Actuator
Z axes 1605 ballscrew, a comparative design proposal.
Build Author Greg Lampman Views 8140
C-Beam Intro to CNC
Build log for my first CNC machine, a C-Beam Plate Maker
Build Author Anglesachse Views 8124
Zorkbot
Corexy, with possible head change (3d, cnc, laser)
Dream to practical
This is my journey from a dream machine to a practical (for me) machine. This is a Cartesian style frame that can change tool heads quickly. The first version will have milling and 3D printing tool heads. Later on I'll add a drag knife tool head.
PnP 4 axis small/fast machine
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
Build Author Nicademus Views 8104
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
OXilla - a 3ft x 3ft CNC Router/Mill - Goals are strength, power and speed
This will be an ongoing log as I build this machine. Name change by popular demand - at least a couple of us. :)
Build Author Rwetzler Views 8016
C-Beam Prototype
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Build Author evildean Views 7987
OX-SUMO, SUMO-OX, OXSUMO?
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
C-Beam Machine Bundle
Short description of my assembly and use of the C-Beam bundle from the Open Builds Part Store.
Build Author Gooshpoo Views 7950
Gooshpoo's H style cnc machine
A cool project about my cnc machines unique style.
Build Author Richard Bugland Views 7922
Heavy Inexpensive CNC
Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.
Our OX CNC Router Project
Our version of the OX, a Cartesian CNC Router Build. 1,500 mm Y-Axis, 1,000 mm X-Axis, 300 mm Z-Axis - Lots of Fun!
Build Author Colin Russon Views 7743
RoboFoamCutter
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
Build Author CWidt Views 7708
OpenBuilds CAndC - CNC Machine
A new derivative of the famous OX CNC, with increases strength, rigidity, and accuracy.
Build Author Bridge Port Views 7708
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author Tucstrlly Views 7702
Stainless OX Kit Build "Diamondback CNC"
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
Build Author zann68 Views 7698
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Build Author Pol Feliu Views 7696
Batxillerat Research Project: Design and construction of a CNC
I'm working on a cartesian cnc router for my school research project
Build Author Karan Singh Sisodia Views 7685
CNC Laser
CoreXY based CNC Laser machine.
Schematix OX metal build
OX metal build from an noob
WorkBee 750x750 build
This CNC build is to help with some areas of my guitar builds - mainly inlays but some body work as well where appropriate. I expect it will be used for lots of other things once I get to know what it's capable of (sorry - what I'm capable of!).
Linear Rail derivative with ball screw
basic start to design of cnc machine
Build Author Justin Butler Views 7540
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Build Author richthorn Views 7502
Aluminum Ox
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
Build Author Huub65 Views 7474
My C Beam - NEMA 17 - GRBL- Arduino project
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
Build Author MikieLikesIt Views 7447
Cousin CNC OX Router
A lower profiled machine. Built all out of aluminum. Removable control panel/PC unit. Option for vacuum table and cooling pump for a spindle.
Build Author mikev Views 7442
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Robo Morten
A horizontal-router CNC using openbuilds parts geared toward routing out mortise and tenon joinery; or any other end grain work on wood.
Build Author John J Talavera Views 7435
CNC FOR EVERYONE, THE DUCK!
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Build Author Christian James Views 7413
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Triangular CNC Milling Machine
A wonky build to eliminate slop on a long Z axis
Ox Stainless with ballscrews
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
Build Author Julius Views 7383
The "Hand" CNC (or OXCarve)
more to come, please follow along the journey!
Yet another Sphinx
Here's my Sphinx with a few slight modifications.
Build Author Krishnakumar Views 7308
Hobby OX CNC
This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!
Build Author that-jim Views 7267
Z-Axis Upgrade For My Sphinx
Z-Axis Upgrade For My Sphinx
CNC CARDBOARD BOX CUTTER
Just an easy build .... uncomplicated.... simple tools .... but hoping for a good result!
DoubleX
This is a Dual X-axis platform.
ZANTRY CNC
CNC Based on CBeam, with No custom Plates, and Z GANTRY
Another OX CNC Router
An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.
Build Author Joe F Views 6930
Rack and Pinion Cartesian Mill
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
Sketchup Design of a PVC CNC I Intend to build.
Build Start to begin Feb 1st.
Build Author d0rk1e Views 6902
OXford (OX fortified)
150x75 cm OX with additional Y axis supports and hopefully a working double belt system
My Second CNC
In short...this was a fun project.
k nest
This Build Is Is Inspired By OOZ Nest CNC, But With Some Changes,
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author John J Talavera Views 6802
Rotomolder
A simple low cost rotomolder.
C-BEAM 1K
The new C-Beam kit expanded to 1000mm . extra support built in for the extents of the travel.
Build Author StrictlyScale Views 6794
Lead1010 Build with Enclosure
First time CNC builder puts together a Lead1010 machine.
New Custom CNC with C-Beam Rails
Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.
Square OX
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
C-Beam Plate Machine
My first openbuilds submission, plain old c-beam machine. Seems like I've spent more time fighting the forum here redirecting in circles than actually building the machine. I'll try to add more pics if I ever find a path out of this corn maze...
CoreXY Tower
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
Ooznest OX CNC for Architecture Modell
While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.
Build Author Weldsmith Views 6642
CUT SMITH
I am building a multi tool CNC. I plan to have a quick change tooling system that will accept Routers, oxy acetylene torch, Plasma torch. etc. there will be a water bed under the convertible router table / work bench. The inspiration to build this machine is from having a small garage and not a shop.
Portable Sphinx 1050
Sphinx 1050 kit mounted to a Husky 46" x 24.5" mobile workbench.
Build Author pedrofernandez Views 6623
ACRO 20x20
The Acro Laser Machine Build
Build Author Ahmed Ibrahim Views 6617
Cairo Mini 3d-Printer
We are introducing the Cairo Mini 3d-printer! It’s a DIY fully Open-source Reproducible 20x20cm 3d-printer. The original goal of the Cairo Mini 3d-printer is to create a low-cost 3d-printer below 220$(3500 LE). That anyone can build with ease.
Build Author Mark Carew Views 6597
OpenBuilds PowerCase
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
Arctic_Stingray CNC
This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.
Build Author Lindsey Lewis Views 6510
CNC Mini Mill Build
CNC Mini Mill build with some mods after following standard build on Youtube video.
Phlux Core XY Laser Etcher
A 750mm x 1000mm Core XY Laser Etcher/Cutter. To cut down on cost I tried to have as many parts as possible be printed.
Build Author mirage335 Views 6468
TazStiff
Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.
1500 x 1500 mm OpenBuild CNC
1500 x 1500 mm OpenBuild CNC
OX CNC Build
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
Build Author Brandon Satterfield Views 6391
SMW3D OX
The SMW3D OX, original other than a lot of learning!
CNC MILLING ROUTER
CNC MILLING ROUTER