Build List
-
Active Filters:
pen
Build Author Bikes and Beer Views 3781
The Forever Project
Workbee 1010 Lead Screw with water cooled spindle and enclosure
Sphinx 1000 x 500
Building a Sphinx based CNC based on Kyo's plans. Going with a 1000 x 500 table size.
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
My Openbuilds Journey
I've learned a lot from building this machine, and had and will continue to enjoy using it. Let The CHIPS FLY!
Build Author OpenBuilds Views 3432
Interface magnetic mount
A simple build that helps you to mount the OpenBuilds Interface to the front of your machine.
32 Button Hand Pendant for the PlanetCNC Control Board
This project is for building a remote hand pendant for the Planet-CNC control board but could be adapted for many other projects. The pendant allows for machine control without being at the computer keyboard and the button functions on the pendant are defined by the user.
MiniMill - A must have machine :)
The new MiniMill from Mark and Sonny is a great little machine.
Fully 3D Printed Small CNC Router/Plotter
3D Printed CNC machine. The build is on Thingiverse. https://www.thingiverse.com/thing:3842401 I posted it here to give props to the Openbuilds Control Software!
Build Author Rich Bowen Views 3175
WannaBe CNC - First time design and build
Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.
CNC China Router Conversion to Open Builds System
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
Build Author Keith Davis Views 3058
Vulcan Bot
A 200mm x 300mm x 200mm workhorse that never needs leveling due to Posi-Drive Leveling design.
Desktop CNC
Approximately 910mm x 955mm x 82mm. There is 250mm available in the Z, but the gantry is only 82mm from the bed surface.
Build Author theracermark Views 2916
Reviving the Origonal PhlatPrinter with BlackBox
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
Clock repair stand
Open source clock movement stand
My ACRO Build
An ACRO laser put together with some repurposed and some new parts.
Build Author ckgottabuild Views 2701
Lead CNC 1010 Platform and Rotating Laptop Mount
Moveable Lead CNC1010 build with handles on four corners. Everything fits on one sheet of cut out 4x8 plywood
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Build Author Calotype Views 2594
My DIY panoramic rolling (&banding) Machine.
DO WHAT YOU IMAGINE !
HandCrafted WorkBee - HCWB
This will be a slow build as I collect parts and materials as funds permit for 1000mm x 1000mm Workbee. I call it the "Hand Crafted WorkBee" because I will be hand making the plates and as much of the build as possible using a drill press and hand tools.
Build Author Linkreincarnate Views 2379
Amazon Special
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Build Author David Hartkop Views 2157
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Damian V-SLOT Poland Views 2082
LEGO BOX
Discover our unique DIY project that blends creativity, utility, and sustainability. This guide will take you through the construction of a LEGO display box, ingeniously crafted using offcuts of V-SLOT aluminium profiles and OpenBuilds accessories. Not only is this an eco-friendly approach to reusing surplus materials, but it also results in a stylish, functional display for your prized LEGO models. Whether you're a LEGO enthusiast or have little LEGO fans at home, this innovative project offers
Build Author Neil Scott Views 2019
Barcelona Build
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
Build Author mjenkins5720 Views 1981
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author Gary Caruso Views 1811
OpenPull From CNC Kitchen.. attempt
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.
C-Beam Machine XL
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.