Build List
-
Active Filters:
slide
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Build Author Rob Taylor Views 24688
DSLR Video Slider
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
Build Author Tommy Williamson Views 5451
Motion control camera slider based on the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
I built a motion control camera slider with the V-Slot® NEMA 17 Linear Actuator Bundle (Belt Driven)
Camera slider for stacking focus
This is just a small project to get use to the OpenBuild products.
Build Author Mark Carew Views 117242
C-Beam™ Linear Actuator
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author rcKeith Views 5993
USB Hot Wire CNC Foam Cutter
Build a Hot Wire CNC Foam Cutter with inexpensive 3d printer electronics.
Build Author mytechno3d Views 5642
DSLR ( video ) motorized slider
In order to make some nice traveling video you need a slider .
6 Axis Motion Control Camera Rig (PAN, TILT, ROLL, SLIDE, FOCUS, ZOOM)
6 axis rig based on OpenBuild C-Beam and ESP32 MCU, WiFi controlled with custom app.
Build Author Beam Views 9264
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author cbordeleau Views 11453
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
7 Axis Camera Slider with Telescoping Vertical Lift
A six axis camera slider with a 7th LIFT axis added!
Build Author stepper Views 3232
Touch screen macro imaging
This is a brief overview of the build of my macro imaging slide.
Makerparts Mpro Slider System
Makerparts.ca MPro Camera Slider System
Build Author RJ_Make Views 4456
Fully Open Source Motorized Camera Slider Build Overview (OpenSlider)
This is a video were take a high level look at how I built up my version of a fully open source Motorized Camera Slider (OpenSlider)
DIY GoPro Camera Slider
A compact portable DIY camera slider for time lapse photography using a GoPro.
Build Author 3D Meister Views 3960
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Anthony Castelluci Views 2493
Simple Camera Lofted Camera Slider
Build a manual camera slider.
Build Author cbordeleau Views 5182
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author Sergei Starovoitov Views 3195
Motorized mic stand
This system allows you to adjust the position of the microphone remotely
Build Author Bobnet Views 15244
Oversize ShapeOko as a 3D printer.
Converting a ShapeOKO into a 3D printer.
Build Author Bobnet Views 12064
Rackmount + OpenRail
OpenRail attached to a 19" rackmount 15U box.