Build List
-
Active Filters:
nc
![OpenBuilds OX CNC Machine](https://openbuilds.com/data/article_images/l/0/341.jpg?t=1391561605)
Build Author
Mark Carew
Views
1158804
OpenBuilds OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138351
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![OX-Metal CNC Router Mill](https://openbuilds.com/data/article_images/l/3/3681.jpg?t=1467782548)
Build Author
Schematix
Views
152110
OX-Metal CNC Router Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
![GRANITE 1.0](https://openbuilds.com/data/article_images/l/7/7661.jpg?t=1545775857)
Build Author
Michael.M
Views
60813
GRANITE 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
![C3DO](https://openbuilds.com/data/article_images/l/5/5957.jpg?t=1511666318)
Build Author
crypt-tek
Views
32198
C3DO
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
C-BEAM-GTC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a larger C-BEAM CNC Machine with no previous experience.
OX AI
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
![WorkBee CNC build - My honest opinion, tips and help](https://openbuilds.com/data/article_images/l/6/6407.jpg?t=1533433899)
Build Author
T4Concepts
Views
70804
WorkBee CNC build - My honest opinion, tips and help
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
![OpenBuilds ACRO System](https://openbuilds.com/data/article_images/l/5/5416.jpg?t=1529678125)
Build Author
Mark Carew
Views
206970
OpenBuilds ACRO System
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/318.jpg?t=1529427874)
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
![Laser V](https://openbuilds.com/data/article_images/l/0/226.jpg?t=1389473225)
Build Author
Robert Hummel
Views
149369
Laser V
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
Openbuilds 4x8 cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I built this cnc using 2 z axis actuators thinking it would minimize deflection and it seems to be very sturdy. I used 2 1500mm c channels for my x axis, 1 1500mm c channel for my y axis, nema 23 stepper motors, dm556 drivers, 2 24v power supplies, smc5-5-n-n controller, 9mm wide belts, and the Hitachi m12vc router. So far it's working very well with a few hiccups. Programming the controller was a learning experience but I'm very happy with it.
![7050 Sphinx](https://openbuilds.com/data/article_images/l/5/5331.jpg?t=1520298636)
Build Author
Michael.M
Views
35868
7050 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
![C-Beam® Machine - Plate Maker](https://openbuilds.com/data/article_images/l/2/2020.jpg?t=1529678249)
Build Author
Mark Carew
Views
252883
C-Beam® Machine - Plate Maker
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
ROUTY CNC Router (V-Slot Belt & Pinion)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
![890KV OX RC spindle](https://openbuilds.com/data/article_images/l/0/411.jpg?t=1399994797)
Build Author
Robert Hummel
Views
68709
890KV OX RC spindle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is intended as a light alternative to the Dremel rotary tool.
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30372
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
![LEAD CNC 1010 (40](https://openbuilds.com/data/article_images/l/7/7832.jpg?t=1543351749)
Build Author
Mark Carew
Views
179372
LEAD CNC 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.
![Standalone Torch Height Controller for CNC Plasma Cutting](https://openbuilds.com/data/article_images/l/9/9571.jpg?t=1601852808)
Build Author
Retsaj
Views
52136
Standalone Torch Height Controller for CNC Plasma Cutting
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
Salmon Sphinx 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
![OpenBuilds MiniMill](https://openbuilds.com/data/article_images/l/5/5087.jpg?t=1543859341)
Build Author
Mark Carew
Views
140560
OpenBuilds MiniMill
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
![C-Beam Lead Screw CNC Mountain](https://openbuilds.com/data/article_images/l/3/3947.jpg?t=1478950296)
Build Author
Savvas
Views
18097
C-Beam Lead Screw CNC Mountain
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
![Workbee CNC Router/Laser/Plotter](https://openbuilds.com/data/article_images/l/7/7966.jpg?t=1552235073)
Build Author
Leonard Cross
Views
33667
Workbee CNC Router/Laser/Plotter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
![1000x1000 Two version of router Belt and Screw](https://openbuilds.com/data/article_images/l/6/6637.jpg?t=1519558083)
Build Author
Janis93
Views
13660
1000x1000 Two version of router Belt and Screw
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Beefed-up and customized OX build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
![C-Beam Prefab Untitled](https://openbuilds.com/data/article_images/l/3/3986.jpg?t=1474752615)
Build Author
ahayden
Views
24996
C-Beam Prefab Untitled
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
![Sphinx XL](https://openbuilds.com/data/article_images/l/4/4141.jpg?t=1507417836)
Build Author
beardyblair
Views
24068
Sphinx XL
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
![1510 Workbee Modified](https://openbuilds.com/data/article_images/l/7/7967.jpg?t=1548191941)
Build Author
Jacob Lotter
Views
22017
1510 Workbee Modified
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Some of the things that I have done to my 1510 Workbee Installed Linear rails and bearing blocks with drawings. Installed Ops console Made conversion plates for extruded aluminum to casters Extended z axis travel by a couple inches with steel plates. As of now in the process of installing Lead screws across the 1500mm length.
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
![The Beeline CNC](https://openbuilds.com/data/article_images/l/6/6656.jpg?t=1519854542)
Build Author
blterry1
Views
16369
The Beeline CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Here are the instructions to build the Beeline custom CNC router table.
LEAD Lathe
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1389472486)
I have been toying with the idea of making a 3 axis rotary CNC machine for awhile. I wanted to make it with off the shelf OpenBuilds parts so any one can replicate it and I felt the LEAD High Z Mod would be a good starting point.
![Stinger V Micro Mill](https://openbuilds.com/data/article_images/l/0/695.jpg?t=1398453371)
Build Author
Robert Hummel
Views
24321
Stinger V Micro Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
Plasma cutter - 608 on steel tube version
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
INDY-TR12 CNC (12mm Diameter Lead Screws)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
TR12x3 screws, M8 wheel sets, a draw built into the design, an electronics set built onto the kit, back brace to stop C-Beam twist.
Rotary CNC
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
I'm building a machine specifically for doing 4th axis work on woodwind instruments.
![](https://openbuilds.com/data/article_images/l/3/3890.jpg?t=1480251471)
Build Author
Glenn Weston
Views
16672
"The Moagie Mill" My C-Beam XLarge
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
22950
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
![LINEAR RAIL SPHINX 55 (Blue OX plates)](https://openbuilds.com/data/article_images/l/9/9317.jpg?t=1588456683)
Build Author
that-jim
Views
41434
LINEAR RAIL SPHINX 55 (Blue OX plates)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Machine based on Sphinx 55 built with linear rails.
Charging Ox CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A heavily modified Ox CNC build to replace SO2.
![TACIT RONIN CNC - Flood Coolant Enabled C-Beam](https://openbuilds.com/data/article_images/l/3/3396.jpg?t=1463500781)
Build Author
alex_b
Views
16510
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
Solid basics CNC router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
![Ooznest OX CNC Machine](https://openbuilds.com/data/article_images/l/2/2084.jpg?t=1468952479)
Build Author
Ryan Lock
Views
129286
Ooznest OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
![WorkBee CNC Machine](https://openbuilds.com/data/article_images/l/5/5626.jpg?t=1505419208)
Build Author
Ryan Lock
Views
123599
WorkBee CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
![High Z Mod for Lead CNC](https://openbuilds.com/data/article_images/l/8/8869.jpg?t=1570825850)
Build Author
Mark Carew
Views
28582
High Z Mod for Lead CNC
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The High Z modification for the LEAD CNC brings your creative capabilities to new heights! With 8" of clearance this modification can be adapted easily to your existing LEAD CNC Router.
![OpenXY](https://openbuilds.com/data/article_images/l/2/2911.jpg?t=1448854520)
Build Author
Keith Davis
Views
28729
OpenXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
C-Beam Machine - MyFirstCNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.
![CNC Sand and Spraycalk drawmaschine](https://openbuilds.com/data/article_images/l/4/4792.jpg?t=1492879931)
Build Author
kallibaba
Views
31689
CNC Sand and Spraycalk drawmaschine
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
A little CNC Sand and Spraycalk drawmaschine More and details in the next weeks
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18065
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Ballmasters 1605 1500x1000 ox cnc
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
![myOX : a 4' x 2' OX CNC with potential](https://openbuilds.com/data/article_images/l/0/915.jpg?t=1458009996)
Build Author
Serge E.
Views
58912
myOX : a 4' x 2' OX CNC with potential
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
OX Tale
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Inspired by the Crawlbot
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Building a couple of CNC's based on the Crawlbot
Prototype Rack-n-Pinion 4'x8'
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a custom gear rack drive machine with a 4'x8' cut capacity.
![Original PhlatPrinter](https://openbuilds.com/data/article_images/l/0/95.jpg?t=1389473544)
Build Author
Mark Carew
Views
70964
Original PhlatPrinter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
![UltiBots CB3030 CNC Router](https://openbuilds.com/data/article_images/l/3/3597.jpg?t=1467332619)
Build Author
UltiBots
Views
34410
UltiBots CB3030 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
Ooznest Ox with 3D Printed Gantry Plates
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
Rotary Axis OX Derivitive
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
A Rotary Axis CNC router based on the OX CNC Router
![Plasma cutting table](https://openbuilds.com/data/article_images/l/3/3528.jpg?t=1465474923)
Build Author
mytechno3d
Views
33709
Plasma cutting table
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
![Halloumi CNC Machine - Acetal Plates](https://openbuilds.com/data/article_images/l/5/5480.jpg?t=1507532304)
Build Author
Savvas
Views
13249
Halloumi CNC Machine - Acetal Plates
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.
![Gooshpoo's H style cnc machine](https://openbuilds.com/data/article_images/l/6/6195.jpg?t=1521645997)
Build Author
Gooshpoo
Views
7898
Gooshpoo's H style cnc machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool project about my cnc machines unique style.
![Sphinx Evolution](https://openbuilds.com/data/article_images/l/6/6390.jpg?t=1520123783)
Build Author
Michael.M
Views
8335
Sphinx Evolution
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Let me explain: About a year ago I was planning to build a CNC router of my own design. I started gathering components including the THK linear rails. I soon found out you pretty much need a CNC to build a CNC and this is when I decided to build my Sphinx machine. I've had these rails and some other parts sitting around so it's time I used them! I'm planning to incorporate linear rails and 1605 ballscrews into the Sphinx design. I really like the overall appearance of the Sphinx.
![Sphinx 1050](https://openbuilds.com/data/article_images/l/7/7822.jpg?t=1543130548)
Build Author
Kyo
Views
30663
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
![Sphinx Upgraded plates / ballscrews and linear rail](https://openbuilds.com/data/article_images/l/8/8026.jpg?t=1544899696)
Build Author
Troy Proffitt
Views
23796
Sphinx Upgraded plates / ballscrews and linear rail
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews
3D printed Laser Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area
MyCNC(1000mm x 1500mm)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My CNC project
![Routy GT2 290 BSX CNC Router, Low Cost and Good!](https://openbuilds.com/data/article_images/l/2/2434.jpg?t=1439915037)
Build Author
Ronald van Arkel
Views
32267
Routy GT2 290 BSX CNC Router, Low Cost and Good!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
OXmill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Small Mill type CNC machine, using C-Beams and V-Slot rail, bundle packs as a starter point. I needed a smallish desktop machine to fit a pretty narrow use case for my business, but the machine itself has larger applications to the OB community. Currently I will run the Dewalt 611 router on the Z axis, but have plans to add in a brushless RC style motor. So this design does have room to go either way easily.
![C-Beam XL - TinyG - Aluminium Plate - Dewalt 611](https://openbuilds.com/data/article_images/l/4/4285.jpg?t=1485886261)
Build Author
jamesdjadams
Views
11143
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL build using TinyG V8.
![CNC xPRO V4](https://openbuilds.com/data/article_images/l/8/8031.jpg?t=1544588533)
Build Author
Spark Concepts
Views
13347
CNC xPRO V4
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Take your build to the next level with the CNC xPRO V4!
![X Y Table OpenRail / V-Slot Build Examples](https://openbuilds.com/data/article_images/l/0/62.jpg?t=1389473342)
Build Author
Mark Carew
Views
67328
X Y Table OpenRail / V-Slot Build Examples
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Mini-OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
![Matt's Ox](https://openbuilds.com/data/article_images/l/3/3494.jpg?t=1469028178)
Build Author
Matt Nelson
Views
11266
Matt's Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
![Lead1010 Build with Enclosure](https://openbuilds.com/data/article_images/l/9/9428.jpg?t=1595361049)
Build Author
StrictlyScale
Views
6661
Lead1010 Build with Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
First time CNC builder puts together a Lead1010 machine.
![YAOR (Yet Another Openbuilds Router)](https://openbuilds.com/data/article_images/l/0/825.jpg?t=1401483549)
Build Author
winand
Views
16835
YAOR (Yet Another Openbuilds Router)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Openbuilds Router, my version :-)
Dragon Too Plasma Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Benchtop Plasma Cutter Concept
Somewhat Simple Lead screw conversion for an OX CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Somewhat Simple Lead screw conversion for an OX CNC.
![OffAxis CNC 1000x1500](https://openbuilds.com/data/article_images/l/6/6413.jpg?t=1519778148)
Build Author
OffAxis
Views
6300
OffAxis CNC 1000x1500
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.
Yet Another LEAD CNC Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
My take on the LEAD CNC build. Followed the instructions and I think it came together very nicely. Added a few of my own touches to finish up the build.
![bor 454-D](https://openbuilds.com/data/article_images/l/9/9915.jpg?t=1619635519)
Build Author
Mike Campbell
Views
9124
bor 454-D
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A large format, modular, rack and pinion build designed around OpenBuilds components.
![C-Beam Mini Mite](https://openbuilds.com/data/article_images/l/10/10001.jpg?t=1625194826)
Build Author
Rick 2.0
Views
14680
C-Beam Mini Mite
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
The Frog: CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
![CNC xPRO Driver](https://openbuilds.com/data/article_images/l/0/643.jpg?t=1479952413)
Build Author
Spark Concepts
Views
71613
CNC xPRO Driver
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Sea-OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my first CNC build. The Sea-OX is a machine built out of three 1000mm C-Beams. I plan to have a Y length of 1000mm and a X length of 650mm. The Z should have the ability to move approximately 100mm.
![OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative](https://openbuilds.com/data/article_images/l/3/3585.jpg?t=1466530123)
Build Author
Julius
Views
23590
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Controlbox for a CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Plastic Monstrosity
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large inexpensive build that can cut a 4x8 ft sheet with room to spare. Can be built using only a 3D printer and standard parts -- no special CNC'd plates required.
![Build #2 - Bigger & Stronger](https://openbuilds.com/data/article_images/l/5/5402.jpg?t=1515568204)
Build Author
JWhitten
Views
12854
Build #2 - Bigger & Stronger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Large format CNC router with a 1500mm x 3000mm cutting envelope (5 x 10 ft) strong enough to cut wood and aluminum constructed from 20-series and 40-series aluminum extrusions. Complete Project Log w/ Pictures: https://goo.gl/photos/Co81AvGwVijE2zow9
![The Floating Dust Shoe](https://openbuilds.com/data/article_images/l/6/6237.jpg?t=1516176994)
Build Author
Eric Jacobsson
Views
12978
The Floating Dust Shoe
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here.
![Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)](https://openbuilds.com/data/article_images/l/8/8485.jpg?t=1567627790)
Build Author
viktop
Views
15741
Simple CNC Router (Nema17, V-slot 2040, Arduino, GRBL)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
An OX-inspired mini desktop mill.
Horizontal MiniMill (x5)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The search for an affordable hobby 5 axis machine.
The RAT. A form ply and aluminium hybrid.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
![The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build](https://openbuilds.com/data/article_images/l/2/2815.jpg?t=1453269930)
Build Author
Peter Oakes
Views
41264
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Schematix OX metal build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX metal build from an noob
![PhlatPrinter MK 3](https://openbuilds.com/data/article_images/l/5/5207.jpg?t=1497557010)
Build Author
Mark Carew
Views
32402
PhlatPrinter MK 3
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
OX, of the house Steel
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OOZNEST Style OX machine with 3D printed panels
![Another Sphinx 7550 Made by an Openbuilds Cbeam](https://openbuilds.com/data/article_images/l/6/6091.jpg?t=1521945969)
Build Author
pedrofernandez
Views
10514
Another Sphinx 7550 Made by an Openbuilds Cbeam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
![OpenBuilds Workbee 1010 (40](https://openbuilds.com/data/article_images/l/7/7198.jpg?t=1529023423)
Build Author
Mark Carew
Views
68555
OpenBuilds Workbee 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
![BlackBox Motion Control System](https://openbuilds.com/data/article_images/l/8/8320.jpg?t=1568566381)
Build Author
Mark Carew
Views
73897
BlackBox Motion Control System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
![Z-Axis Upgrade For My Sphinx](https://openbuilds.com/data/article_images/l/10/10387.jpg?t=1669503322)
Build Author
that-jim
Views
7125
Z-Axis Upgrade For My Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
Z-Axis Upgrade For My Sphinx
![RONIN OX | The G10/Carbon Fiber Hogger](https://openbuilds.com/data/article_images/l/2/2876.jpg?t=1447906012)
Build Author
alex_b
Views
14132
RONIN OX | The G10/Carbon Fiber Hogger
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)