Build List
-
Active Filters:
aluminum
![7050 Sphinx](https://openbuilds.com/data/article_images/l/5/5331.jpg?t=1520298636)
Build Author
Michael.M
Views
35868
7050 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
![C-Beam® Machine - Plate Maker](https://openbuilds.com/data/article_images/l/2/2020.jpg?t=1529678249)
Build Author
Mark Carew
Views
252883
C-Beam® Machine - Plate Maker
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
![Rawcnc 1.5 Desktop Edition](https://openbuilds.com/data/article_images/l/5/5771.jpg?t=1529849503)
Build Author
roadss
Views
22950
Rawcnc 1.5 Desktop Edition
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will showcase the build of my Rawcnc 1.5. A rigid cnc router from the Swedish company Rawcnc, featuring a rather cool linear motion system, rack & pinion and steel reinforced X-axis capable of milling aluminum.
![SOLAC: Space Optimized LAser Cutter](https://openbuilds.com/data/article_images/l/4/4605.jpg?t=1487474603)
Build Author
Lumberjack Engineering
Views
18065
SOLAC: Space Optimized LAser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
![C-Beam XL - TinyG - Aluminium Plate - Dewalt 611](https://openbuilds.com/data/article_images/l/4/4285.jpg?t=1485886261)
Build Author
jamesdjadams
Views
11143
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL build using TinyG V8.
![Matt's Ox](https://openbuilds.com/data/article_images/l/3/3494.jpg?t=1469028178)
Build Author
Matt Nelson
Views
11266
Matt's Ox
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
![45W CO2 Laser Build](https://openbuilds.com/data/article_images/l/9/9025.jpg?t=1623328241)
Build Author
wackocrash5150
Views
17193
45W CO2 Laser Build
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.
C-Beam XL with Aluminum Bed
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-Beam XL with v-slot aluminum bed for fixturing.
![YACLR CNC](https://openbuilds.com/data/article_images/l/7/7076.jpg?t=1534106561)
Build Author
HuguesP
Views
8161
YACLR CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
![Another Sphinx 7550 Made by an Openbuilds Cbeam](https://openbuilds.com/data/article_images/l/6/6091.jpg?t=1521945969)
Build Author
pedrofernandez
Views
10514
Another Sphinx 7550 Made by an Openbuilds Cbeam
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
feel free to ask anything about this builds, but im a airline pilot and sometimes responding maybe will take me. while!!
![OpenBuilds Workbee 1010 (40](https://openbuilds.com/data/article_images/l/7/7198.jpg?t=1529023423)
Build Author
Mark Carew
Views
68555
OpenBuilds Workbee 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
76727
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
![Modular DIY CNC Machine](https://openbuilds.com/data/article_images/l/6/6140.jpg?t=1516590691)
Build Author
jtaggard
Views
32346
Modular DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
![CRH C-BEAM Router, steel capable](https://openbuilds.com/data/article_images/l/4/4663.jpg?t=1488314646)
Build Author
chenderson
Views
11192
CRH C-BEAM Router, steel capable
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam based CNC router using mostly openbuilds parts.
![The MakerSL Customized OB Minimill](https://openbuilds.com/data/article_images/l/3/3647.jpg?t=1498037174)
Build Author
Sonny Lowe
Views
5936
The MakerSL Customized OB Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Desktop CNC machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Stable solid, hope can cooperate with coolant in the future.
![OpenBuilds Sphinx 1050 (20](https://openbuilds.com/data/article_images/l/7/7196.jpg?t=1529007338)
Build Author
Mark Carew
Views
28960
OpenBuilds Sphinx 1050 (20" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
![OpenBuilds Sphinx 55 (20](https://openbuilds.com/data/article_images/l/7/7197.jpg?t=1529019228)
Build Author
Mark Carew
Views
47263
OpenBuilds Sphinx 55 (20" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
Rex
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
![Plate Maker V-slot Table](https://openbuilds.com/data/article_images/l/5/5876.jpg?t=1510340593)
Build Author
Kyo
Views
8473
Plate Maker V-slot Table
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
![Fixed Gantry CNC Router with Old Industrial Supplies](https://openbuilds.com/data/article_images/l/6/6536.jpg?t=1546123345)
Build Author
MattR
Views
14622
Fixed Gantry CNC Router with Old Industrial Supplies
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I got lucky enough to purchase aluminum extrusions and linear motion components (and nuts/bolts/etc) at scrap metal prices when a bunch of industrial automation equipment was decommissioned. The only problem is that the aluminum extrusions are not metric sizes... they are the 1.5"x3" 80/20 series. It has presented a few challenges but nothing too bad.
![openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)](https://openbuilds.com/data/article_images/l/1/1657.jpg?t=1422099227)
Build Author
openhardwarecoza
Views
27044
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
![Coined by my family as the: Davomatic](https://openbuilds.com/data/article_images/l/7/7484.jpg?t=1534077885)
Build Author
JerwanDavis
Views
4860
Coined by my family as the: Davomatic
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.
Water Buffalo - Water jet cut OX+
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A modified OX based on Aluminum plates cut on a waterjet. Some new ideas and additions from other builds are included.
![Beefed up Minimill](https://openbuilds.com/data/article_images/l/9/9488.jpg?t=1598294747)
Build Author
Yanou Fishel
Views
8250
Beefed up Minimill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A beefed up minimill, ready to gnaw on some aluminum! HG15 linear rails, a thick heavy column, bellows and easy fixturing and tramming.
![Racoon CNC](https://openbuilds.com/data/article_images/l/9/9623.jpg?t=1605312916)
Build Author
Stokrotka74
Views
5615
Racoon CNC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Sphinx variation, aimed to minimize footprint and maximize workarea. Work in progress.
Joe's Minimill Build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I put this together to cut aluminum. Chips get everywhere! Cover your lead screws. Put the mill inside an enclosure. DON'T mount electronics (especially the power supply) inside the enclosure, chips will get into it and short it out. Remove the manual jog wheels, they contribute to chatter (something about having a mass on the end of the lead screw causes vibration). I cut at 14000 RPM, 0.05 inch width of cut, 0.05 inch depth of cut, 30 inches per minute and just barely avoid chatter.
![Sheethexapod](https://openbuilds.com/data/article_images/l/4/4220.jpg?t=1481407627)
Build Author
Edgar Robles
Views
3223
Sheethexapod
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
![Printer1](https://openbuilds.com/data/article_images/l/3/3452.jpg?t=1463474495)
Build Author
andrizzle
Views
5855
Printer1
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Open source 3D printer with very powerful heated bed and light weight x axis design. Full source repository can be found here: https://github.com/a-drizzle/Printer1
![BABE - CanUSA Blue OX, bigger than the average OX](https://openbuilds.com/data/article_images/l/2/2030.jpg?t=1429841265)
Build Author
Donald D. Parker
Views
4837
BABE - CanUSA Blue OX, bigger than the average OX
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a basic description of my OX-like build of Babe, Paul Bunyan's Blue Ox. It is a work in progress. The idea has been germinating for about 4 years, with several twists and turns and false starts along the way.
Aluminium Router From Dubai
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another modification on the OX
![Mobile bed cnc machine, first build](https://openbuilds.com/data/article_images/l/5/5584.jpg?t=1504802428)
Build Author
Jason Harding
Views
3130
Mobile bed cnc machine, first build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Currently i am reworking the frame still with current available parts just going to buy material to make the y and the z axis from openbuilds. The x axis is now going to be mobile similar to a 3d printer style.
![CoreXY 3D build one](https://openbuilds.com/data/article_images/l/4/4874.jpg?t=1569010665)
Build Author
recoush
Views
7470
CoreXY 3D build one
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
![KYO SPHINX a la' SCYBUCK](https://openbuilds.com/data/article_images/l/7/7717.jpg?t=1539666910)
Build Author
SCYBUCK
Views
4296
KYO SPHINX a la' SCYBUCK
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
KYO SPHINX, CENTROID ACORN, GECKO 540, HALL EFFECT LIMIT SWITCHES, 2.2 KW, 24,000 RPM SPINDLE, WATER COOLED, 600 oz-in STEPPERS, INTENDED TO CUT ALUMINUM.
![Lead 1010 Build - Anything but stock.](https://openbuilds.com/data/article_images/l/9/9206.jpg?t=1582316575)
Build Author
Forestbird Originals
Views
3806
Lead 1010 Build - Anything but stock.
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.
![OpenBuilds Workbee 1050 (40](https://openbuilds.com/data/article_images/l/7/7199.jpg?t=1529026299)
Build Author
Mark Carew
Views
24346
OpenBuilds Workbee 1050 (40" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1050 - 1000x500 Lead Screw Driven CNC Machine
Butterfly 3DP V 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
tronxy x3 like
![OrionPlus](https://openbuilds.com/data/article_images/l/9/9394.jpg?t=1593570848)
Build Author
Yosmany325
Views
1575
OrionPlus
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Cartesian style CNC with a working area of around 360mm x 360mm x 120 mm (X, Y, Z) using Linear rails and ball screws. The linear rails are (Hiwin?) HGR 20mm x 520mm and the ball screws are SFU1204 (12mm lead 4mm) of around +/- 430 mm. The base structure is made from rectangular aluminum profiles of 70mm x 45mm x 3mm (thickness of walls).
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)