Welcome to Our Community

Some features disabled for guests. Register Today.

Pretty Standard + Slave X Axis

Discussion in 'CNC Mills/Routers' started by Skoobs, Sep 12, 2015.

  1. Skoobs

    Skoobs New
    Builder

    Joined:
    Sep 9, 2015
    Messages:
    7
    Likes Received:
    2
    Skoobs published a new build:

    Read more about this build...
     
  2. Skoobs

    Skoobs New
    Builder

    Joined:
    Sep 9, 2015
    Messages:
    7
    Likes Received:
    2
  3. dakman

    dakman New
    Builder

    Joined:
    Sep 4, 2015
    Messages:
    16
    Likes Received:
    4
    How are you connecting the y-axis uprights at the rails? Can you you add an image of the area, close up?
     
  4. Skoobs

    Skoobs New
    Builder

    Joined:
    Sep 9, 2015
    Messages:
    7
    Likes Received:
    2
    I was just going to bolt through the Gantry Plate into a T-Nut inside of the upright extrusion.

    Now I am wondering if there will be enough clearance for the head of the bolt, or if I will have to countersink the holes and use bolts that will sit flush with the surface.
     
  5. dakman

    dakman New
    Builder

    Joined:
    Sep 4, 2015
    Messages:
    16
    Likes Received:
    4
    That's what I thought ...the clearances required for the hardware will require some mods to holes, tapping or counter sink or bore.

    Thanks for the fast answer!
     
  6. Skoobs

    Skoobs New
    Builder

    Joined:
    Sep 9, 2015
    Messages:
    7
    Likes Received:
    2
    Also, the holes in the riser plates are tapped, so I may just skip them.

    Though I really wanted to make my own cover plates for the X axes. Would be bad to machine your own handle into them and mount them down the sides. *heavy breathing*

    but ultimately its not necessary, and would be purely cosmetic. probably more effort than it is worth.
     
  7. dakman

    dakman New
    Builder

    Joined:
    Sep 4, 2015
    Messages:
    16
    Likes Received:
    4
    The other issue I see with using the internal rails in the y-axis, because the wheel support distance is very close together and with the x-axis so high, the torque on that area will be substantial. The unit I'm designing will use the external rails with a home made gantry plate with a rather far apart spread of the v-wheels. I will use the internal and external rails for a very stiff ride..hehehehehe
    Dakmans Router design.jpg
     
  8. Steven Bloom

    Steven Bloom Journeyman
    Builder

    Joined:
    Dec 18, 2014
    Messages:
    194
    Likes Received:
    104
    Very nice and interesting build. Looks similar to my Sea-OX.

    Thanks Steven
     
  9. dakman

    dakman New
    Builder

    Joined:
    Sep 4, 2015
    Messages:
    16
    Likes Received:
    4
    Hey all the great people are named Steve......hehehehehe
     
    Steven Bloom likes this.
  10. Skoobs

    Skoobs New
    Builder

    Joined:
    Sep 9, 2015
    Messages:
    7
    Likes Received:
    2
    I could make the cross member axis lower (you are referring to it as X, I was calling that Y, same difference) in order to drastically reduce the torque on the long axes.

    150mm veritical members rather than 250mm may suffice. I worry about the stability of plates. I am not sure if they would flex or bend.

    One of the other worries I have is the horizontal X axis holding the spindle. I wonder if it would put too much torque on the wheels. Your orientation seems nice, but once again requires a custom mounting bracket which I don't have the ability to make right now.
     
  11. Steven Bloom

    Steven Bloom Journeyman
    Builder

    Joined:
    Dec 18, 2014
    Messages:
    194
    Likes Received:
    104
    You could easily make the parts so they wont bend. Currently pictured on my Sea-Ox I am using .25" MDF. That is certainly not strong enough for plates. But soon I will be having all of my plates cut from a piece of 2' x 2' x 3/16" Stainless Steel. The Stainless is extremely strong and will not bend.

    Stainless 1.jpg Stainless 2.jpg
     
  12. Skoobs

    Skoobs New
    Builder

    Joined:
    Sep 9, 2015
    Messages:
    7
    Likes Received:
    2
    That would be ideal, but I was hoping to do this cheaper. Then, once I have this thing running, I can machine my own plates out of aluminum. I doubt this thing would do stainless even with the 1.5kW water cooled spindle.

    I guess I could see if someone at work would machine the plates for me if I provide them with the files. The downside to being at a big company is you cant just hop on a machine whenever you have downtime. resources are constantly being stretched to their limits.
     
  13. Steven Bloom

    Steven Bloom Journeyman
    Builder

    Joined:
    Dec 18, 2014
    Messages:
    194
    Likes Received:
    104
    I actually only paid $130 for the stainless. Someone is being kind and cutting the material for free on a water jet for me.
     
  14. vickers20

    vickers20 New
    Builder

    Joined:
    Dec 21, 2014
    Messages:
    2
    Likes Received:
    0
    Hey I been wanting to build one just like this one you designed. Do you have a compelte parts list yet. And if you do build this are you going to use the parts you get from the open builds store or use other sites?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice