Welcome to Our Community

Some features disabled for guests. Register Today.

OX for small business

Discussion in 'CNC Mills/Routers' started by Nates02gt, Mar 10, 2016.

  1. Nates02gt

    Nates02gt New
    Builder

    Joined:
    Sep 10, 2015
    Messages:
    16
    Likes Received:
    1
    I only found one other thread on the forums that talked about using the OX in a small business application. I am in the process of starting a side business that I intend to make a full time thing within the next 3 years. I have had a Chinese laser engraver (36x24 bed) for the past 3 years and have become quite comfortable using it. I also built the C-beam machine last year and feel relatively comfortable with the components. I plan on adding a larger CNC to my shop within the next 6-12 months. I talked to a guy this past weekend that just bought a Legacy Hybrid that put him out 20K. The machine is really nice, has five axis and runs smooth. Aside from the solid build, it seems like a lot of what you are paying for is tech support for the machine, which I do believe I will need. I can swap out a motor or driver or trouble drive or electronic issues for the most part without too many problems. Anyway, I am trying to decide if I should go the OX route or if I should get a kit similar to one that is on CNCrouterparts.com. My two biggest concerns are rigidity of the machine and reliability of the components. The budget that I am working with is flexible. I don't plan on spending 20k but I can see spending up to 5k to build a decent machine if needed. If I need to wait a few or several months to add more to the budget, I can do that. I would rather get it right the first time than go fast and cheap and have to deal with a bunch of headaches after the build. Below is what I have more or less decided on for some of the components. I am still in the early stages and don't have everything nailed down yet.
    -Air/water cooled spindle
    -Mach 4
    -Gecko G540+Smooth Stepper Ethernet+PS etc
    -Motors (waiting to determine size and weight of the machine)
    -Drive system (unsure at this point, could go belt drive, ball screw or rack and pinion)

    I would like to have at least 6" Z travel and a minimum of 48" usable X axis. I am flexible now on the Y axis but will probably go for somewhere around 48". I anticipate using the machine mainly for wood products, probably 95%+. There will also be some metal engraving with a drag bit and probably some acrylic, maybe some aluminum, but not much. I also need to incorporate a decent dust collection system. I have a computer that I am currently using to run the laser and am planning on having the CNC near the laser, so I should be able to run both machines from the same computer unless there is a good reason to run them on separate computers.
    Any feedback or input anyone has would be greatly appreciated!

    Nate
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice