Welcome to Our Community

Some features disabled for guests. Register Today.

Confused: "Superstructure" used for router builds.

Discussion in 'General Talk' started by Tom Allen, Apr 2, 2016.

  1. Tom Allen

    Tom Allen New
    Builder

    Joined:
    Aug 4, 2015
    Messages:
    12
    Likes Received:
    3
    Hello, Folks,

    What am I missing? I see the care, technology, enthusiasm, and COST related to “builds”. Great care is taken to be precise and produce a high-tolerance machine. Then I see that the builders use a sheet of plywood on sawhorses as a platform for his/her precision machine. Seems like it defeats the whole purpose and a waste of hard earned work, technology and money. To me, if one is going to build such an “instrument”, shouldn’t more consideration be given to the support structure?
    Regards,
    Tom
     
    Joe Santarsiero likes this.
  2. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    It usually is. Sometimes, the second time around. :D
    People are so wrapped up in building their machine, that things like the work table gets neglected. :banghead:
    However, when they see the problems caused by insufficient support, they normally get around to correcting the problem. But, most often, it's not something the builders feel the need to tell us about. Although there have some great designed tables shown on the Forum. :thumbsup:
     
    Tom Allen likes this.
  3. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    My design for this summer will sit my CNC on 3" rubber decoupler on a 2" thick concrete tabletop (don't know yet for the legs :p)
     
    Joe Santarsiero likes this.
  4. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    See, I told you. :D
     
    Tom Allen likes this.
  5. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    2,899
    Likes Received:
    1,613
    I built a very robust torsion box table top last weekend and plan to weld up a steel frame for it and the cnc to sit on. But first I need to work to the problem of getting my gantry beam ends square. I thought my chop saw was square when I cut the pieces. :(
     
  6. Tom Allen

    Tom Allen New
    Builder

    Joined:
    Aug 4, 2015
    Messages:
    12
    Likes Received:
    3
    O. K., so I'm not totally all-wet. Thanks, GrayUK.
     
    GrayUK likes this.
  7. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Giarc. I think from practice, the best way to create a square end to your ali is to, cut it approximately the right length, (2 or 3mm grace) and then to clamp a straight edge, absolutely square, and use a router to skim it off to a line.:thumbsup:
     
  8. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    2,899
    Likes Received:
    1,613
    Thanks. I was able to get my chop saw square. The router was my next option. I am tempted to make a cut off jig for the router like Rick posted with my left over v-slot scraps.
     
  9. Joe Santarsiero

    Joe Santarsiero OB addict
    Staff Member Moderator Builder

    Joined:
    Oct 30, 2014
    Messages:
    902
    Likes Received:
    196
    I couldn't agree more Tom!
    The table or frame is commonly over looked and not considered until it's realized as the weakness. I think Gray is right in that builders get wrapped up in the machine. It alone can be overwhelming. When you include the electronics and software side of the deal it's easy to see how the base can be overlooked. With that said, it's not something that will kill the project. Usually, a base can be built and installed later on. I picked up the 2x4 basics molded legs on sale from the net. 2 x 4 basics - Google Search
    Followed the instructions, added the diagonal member, and used a nice 5ply top. It's a very sturdy. For the extra 15 bucks over using 4x4s for legs it took out the extra labor and all of the guesswork to get it level. I'd do it again.

    Joe
     
    Tom Allen likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice