Welcome to Our Community

Some features disabled for guests. Register Today.

CNC

Discussion in 'CNC Mills/Routers' started by Rigga11, Jun 16, 2016.

  1. Rigga11

    Rigga11 New
    Builder

    Joined:
    Apr 24, 2014
    Messages:
    9
    Likes Received:
    15
    Rigga11 published a new build:

    Read more about this build...
     
  2. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    cool! Hopefully you dont get much play with such long spans. Are you planning to do such deep carvings?
     
  3. Rigga11

    Rigga11 New
    Builder

    Joined:
    Apr 24, 2014
    Messages:
    9
    Likes Received:
    15
    I honestly don’t really know what all I would like to do with my CNC. So I designed with the idea that I may want to some bigger items. I have been fighting play on the X and Z axes a bit. So far I have just been doing some arts and crafts (to get some learning / practice in) type projects so accuracy hasn’t been an issue. You can see in the last few I photos I posted that I replaced the C-Beam on the side for ½” x 7” aluminum flat bar. The issue I had with the c-beam was the connection. The original C-Beam Gantry Plate just didn’t have a large enough foot print to over come the leverage created by the vertical height of the X axis. The new aluminum bar and wheels spread out has greatly reduced the play. Now I am thinking of replacing the V-Slot Gantry Plates where the X and Z axes connect with 1/4 “ x 7” aluminum flat bar. I think doing this will make it play free.
    Gantry Plates3D.jpg Gantry Plates.jpg
     
  4. Rigga11

    Rigga11 New
    Builder

    Joined:
    Apr 24, 2014
    Messages:
    9
    Likes Received:
    15
    Here are photos of my first projects that I used my CNC on.

    IMG_1110[1].JPG IMG_1177[1].JPG IMG_1202[1].JPG IMG_1446[1].JPG IMG_1493[1].JPG IMG_1430[1].JPG IMG_1583[1].JPG
     
  5. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    Have you worked out the issues with play on the axis's?
     
  6. Rigga11

    Rigga11 New
    Builder

    Joined:
    Apr 24, 2014
    Messages:
    9
    Likes Received:
    15
    I haven't worked out all of the play yet. I am hoping to when I get a chance to make and install these plates.

    View attachment 16830
    View attachment 16831
     
  7. Dale Mahan

    Builder

    Joined:
    Mar 29, 2015
    Messages:
    13
    Likes Received:
    1
    Can you keep your Parts List updated with the price you paid for each item as you go through your refinements and updates to remove play from the axes?
     
  8. Rigga11

    Rigga11 New
    Builder

    Joined:
    Apr 24, 2014
    Messages:
    9
    Likes Received:
    15
    I will try my best. I just ordered the Aluminum Flat Bar to make some bigger plates to replace the plates connecting the X and Z axis.
     
  9. Julius

    Julius Well-Known
    Builder

    Joined:
    Nov 13, 2015
    Messages:
    193
    Likes Received:
    61
    I recommend you lower your plates, since the higher they are the more leverage there is (or, add smooth bars and linear blocks to enforce it) and consider mounting your Z axis "properly", like in the Cebu thread
     
  10. Dale Mahan

    Builder

    Joined:
    Mar 29, 2015
    Messages:
    13
    Likes Received:
    1
    What power supply are you using for the steppers?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice