Welcome to Our Community

Some features disabled for guests. Register Today.

Producing 3D relief's for free.

Discussion in 'Other Software' started by Tweakie, Feb 19, 2014.

  1. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Mach1 Filter.exe.

    Mach1 Filter is a little known and often overlooked, free, stand-alone, Windows based application which can be used to create the necessary GCode tool-path for producing Lithophanes, 3D Relief’s and also laser, raster scan images etc.

    It was written a few years ago and is pretty basic (without all the bells and whistles often found in more up-to-date software) but it still does a good job, and can accept HPGL, JPG & BMP format images.

    As with most software, to obtain the best results, a little practice is required to judge the correct brightness / contrast / sharpness for the original image but it is quickly mastered and for those wishing to try, it can be downloaded from here Mach1Filter

    This is just an example of a 3D relief reproduction working from a JPG depth-map image.

    g1.jpg g0.jpg g2.jpg g4.jpg

    Tweakie.
     
    crispin, Evan F, GrayUK and 1 other person like this.
  2. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    Hi Justin Time,

    It’s probably best suited for router use.

    However, it can create the GCode for raster scan reproduction of DXF’s with a laser simply by using the machine’s Z axis direction pin as the laser trigger (small change to ports & pins configuration if using Mach3).

    I am not sure if it can produce anything useful for use with an impact magnet tool – perhaps one day I will give it a try.


    Tweakie.
     
    JustinTime likes this.
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,742
    Likes Received:
    2,407
    Nice find @Tweakie Thanks for the share
     
  4. Johnnythehammer

    Builder

    Joined:
    Feb 15, 2015
    Messages:
    1
    Likes Received:
    0
    Can I view the converted file with Artcam express? I tried with no luck.
     
  5. Tweakie

    Tweakie OpenBuilds Team
    Moderator

    Joined:
    Jan 18, 2014
    Messages:
    784
    Likes Received:
    326
    The converted file is Gcode so you would be able to use any Gcode viewer.

    Tweakie.
     
  6. Ronald4418

    Ronald4418 Well-Known
    Builder

    Joined:
    Nov 4, 2015
    Messages:
    218
    Likes Received:
    33
    I tried in on my Windows 7 desktop and while the program loads and starts to process an image. It always seems to stop. Is there limits as to the size of an image being used or am I missing something?
     
    Anthony Bolgar likes this.
  7. Anthony Bolgar

    Anthony Bolgar Journeyman
    Builder

    Joined:
    Jan 14, 2016
    Messages:
    354
    Likes Received:
    198
    I have the same issue, it just seems to freeze.
     
  8. Ronald4418

    Ronald4418 Well-Known
    Builder

    Joined:
    Nov 4, 2015
    Messages:
    218
    Likes Received:
    33
    While costing a few dollars as opposed to Free. Bmp2CNC is another 3D Relief creation software that I've worked with for years. I don't have any examples to show as other than creating GCode the actual files are saved in the .STL Format and therefore I can't share them here as they're to large.
     
    Joe Santarsiero likes this.
  9. Ronald4418

    Ronald4418 Well-Known
    Builder

    Joined:
    Nov 4, 2015
    Messages:
    218
    Likes Received:
    33
    Compared to the $4200.00 for a year that Artcam costs and because it will work without issues, unlike Mach1 Filter. $45.00 and the fact that it works with all versions of Windows without any issues. Seems to be a very good compromise in my book.
    If Free is a prerequisite, than might I suggest that you look in the various Open Source Registries as I am quite sure that there are plenty more options available. But you can forget about any idiot proof point and click remedies.
     
  10. Davidoe

    Davidoe New
    Builder

    Joined:
    Dec 10, 2014
    Messages:
    3
    Likes Received:
    2
    The creation of 3d reliefs begs the questions "How to create depth-maps in the first place?" and alternatively "Where are the depositories for maps already created?"
     
    nportelli likes this.
  11. hairyMug

    hairyMug New
    Builder

    Joined:
    Dec 5, 2016
    Messages:
    8
    Likes Received:
    5
    I tried this on a windows 10 PC and it just manages to process a long time and use 30% of the processor and create a huge file (2gb+) before freezing...
    >> 8gig memory with I7 processor

    What are the image specs?? i.e. size and resolution?

    You may want to check out:
    "HalfToner" by Jason Dorie ; Many adjustments to fine tune and runs very fast...
    &
    "Extrudy" lets you set profile of cuts (a bit of a learning curve)
     
    #11 hairyMug, Mar 24, 2017
    Last edited: Mar 24, 2017
    crispin likes this.
  12. nportelli

    nportelli New
    Builder

    Joined:
    Jan 24, 2017
    Messages:
    20
    Likes Received:
    2
    I know this is a very old thread...and I don't really need the program mentioned. But like Davidoe, I'd like to know if there are programs that generate images like the one shown.
     
  13. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,238
    Likes Received:
    1,815
    @nportelli @crispin
    I have been using this
    dmap2gcode
    to create lithophanes but I am sure it will do reliefs, just fiddle with the settings till it works.
    a warning though, such cuts can take a long time (-:
     
    crispin likes this.
  14. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Haven't seen them for ages. I remember watching a few videos on Youtube quite some time ago.
    Thanks for the memory jog. :thumbsup::)
     
  15. crispin

    crispin New
    Builder

    Joined:
    Jun 21, 2016
    Messages:
    49
    Likes Received:
    9
    :thumbsup::D:thumbsup:
     
  16. crispin

    crispin New
    Builder

    Joined:
    Jun 21, 2016
    Messages:
    49
    Likes Received:
    9
    Depth Map Cutting is what many robocarvers want to do on their table builds and dmap2gcode has many settings to fiddle for sure but it's still easier for photoshop users to master than learning another new 3D vector application. "Image-to-gcode" is deep!

    so.many.settings. set them all to match the imagematerialcutter resolution for the job and I suspect it can carve with quickness.
    "When LaceBounding is not None, slopes greater than Contact angle are considered to be "strong" slopes, and slopes less than that angle are considered to be weak slopes." is what now?
    remember:
    "just fiddle with the settings till it works"
    Image-to-gcode
     
  17. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,238
    Likes Received:
    1,815
    it affect how fast and accurately the slopes are cut. (-:

    I suggest you get some insulation foam and experiement. the foam can be cut very fast and is relatively cheap (or you can use discarded molded polystyrene packing).
    one thing to watch is the size of the input image. this affects the 'pixels per stepover' and is easy to change by scaling the image in GIMP or Irfanview or similar.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice