Separate names with a comma.
Some features disabled for guests. Register Today.
Been awhile since I've had this machine up, but I still use the same spindle on my current BlackBox build. Underneathe the "dust" shoe, I...
Just tested v1.0.329 on the same gcode file giving websocket serial error on the previous version, it now works perfectly! Thanks!
Thanks for the help on this Peter! DM me for my test gcode I couldn't get to start on v1.0.328 if you'd still like to test that. It was a larger...
Just downgraded to v1.0.321 and both issues went away and my next job is running perfectly. Definitely something is up with v1.0.328. (We run...
Having the exact same issue today. Ran first job fine, did the update, next job the RUN button is effectively disabled. Serial output when RUN...
You can use high inductance NEMA 23 motors if you care less about speed and want more holding torque at the lower end of the speed range. In my...
You may have to make an adapter plate to interface it correctly, but this mount is the one we use. The structure should support it well. Our 2nd...
Hi Mark, Welcome to the rabbit hole! :) The open-CNC world is very exciting! 1) I don't use a Lead 1515 in my shop but a custom build which is...
Hi Ron, Sorry I didn't reply earlier, I'm afraid I don't have any experience with Sketchup! I run TinyG controller with Chilipeppr interface with...
Hey Glen, Submerging parts definitely works, but i would only use a DOC (depth-of-cut) of about 1mm. It only uses the bottom tip of the tool...
Hi all, Been wanting to make this thread for awhile about some general tips and tricks I've learned after cutting fiber composites and carbon...
Hey Bernard, Thanks for the compliment!! The waterjet project sounds awesome! I do a lot of pocketing and 3D features in carbon fiber and G10...
@flyingDutchman Possibly be due to belt tension or possibly the steps/mm setting is slightly off. Even 0.05mm off makes a big difference.
Thanks @Christopher Björkqvist ! I like G10 a lot, same tensile strength as carbon steel and a quarter of the weight! :thumbsup:
