Separate names with a comma.
Some features disabled for guests. Register Today.
This is how it is currently set up. I really need a dust boot though.
Ok, I think moving up to 1000x1000 would honestly be enough. What all would I need? Would upgrading to the high torque stepper motors be necessary?
Just curious, if I wanted to expand my 1050 to a larger platform, how much larger can I go? I see the lead screw tops out at 1040mm. So 1000x1000?...
The pulled that was loose did not have a screw that went into the pulley and against the threaded shaft. Just a clamp style. I adjusted the lead...
[MEDIA]
So I can see where it is slipping now. I had tightened this bolt up last time and it ended up stripping and I had to buy a new pulley. Am I...
The bit isn’t slipping, its either the pulley is slipping on the threaded shaft or it’s slipping on the stepper side.
I figured out the tilt in the dewalt, the screw ring to set the depth in normal use was hitting a bracket and tilting it. Removed that ring and it...
is there any way to change the tool path so that it does not lift after each path with this? also i think my z-axis is a little tilted. i am using...
is there a surfacing option in this software, like to level the waste board.
I can hear a grunting noise at times with z axis movement. I will shoot a video this evening.
I have a sphinx 1050. The z axis skips or jumps and will knock the cut off of where it was set to. I’ll start making .2mm cuts and end up with a...
Wow. That’s pretty amazing. Thank you!
As of right now I am only using the openbuilds CAD/CAM and the openbuilds controller programs.
