Separate names with a comma.
Some features disabled for guests. Register Today.
So I did several things and something along the way seems to have fixed my issue. Without even pulling out the scope. I changed the motor...
I haven't looked at using the scope yet so I can't input much about accuracy but I'd be wary of those scopes and their value. When you say scope...
Ill try that.. Luckily I have a scope if I need it. Thanks.
Sorry.. I should have included that rather important info. I have a TinyG V8 board and was using chilipeppr to run some gcode generated by...
So I was doing some testing today on engraving on AL plate. Overall it was coming out ok but I noticed while watching it that one side of the...
I have built an OX CNC with a tinyg controller. I wanted to make an engraved plate so I downloaded f-engrave. I got the look I wanted and saved...
Thanks David.. It turns out my problem went even deeper than that. Ultimately with the help of the folks over at Synthetos we got it sorted...
Happy Sunday So I decided I wanted to put some homing switches on my OX CNC. I put one on the front of the frame for the Y axis. The switch...
The hardest part now is having it sit there while I wait for the orders to come in with the new parts. Is chilipeppr the only app that can...
Thanks.... Order placed...
Would this bit make a sensible bit for surfacing?...
Cool.. Thanks everyone.. Linux.. Now you are talking my language... Since 1993... :)
