Separate names with a comma.
Some features disabled for guests. Register Today.
I have tried the 5v and GRBL Panel and it is working now. GRBL Controller would not work because it need to be home first , and my limiter is not...
What I mean is the other digital pin 8 on top, where you solder on the under side to the extra screw to the yellow cable. If this image is...
Are you sure you are wrong?? I can still see the red wire on pin 8 en to the yellow wire from the picture above.
It make sense now haha. Its ok, its hard enough to build this machine, it even harder to document everything while doing it. Do you mind share you...
I tried your way but didnt work but i need to do more learning on the grbl settings. I am using grbl controller which the setting table doesn't...
Finally I started wiring my build, I have done the electronic just like yours with screw shield and drivers. I have done all the soldering and...
Thank you for the great info, I will look up that link.
I had a search, I think the other thing would be a network cabinet, Price start about £45 around 2 atx case cost but does come with Strong glass...
Thanks for the reply! Does the voltage affect the amp calculation? let sat 12v 24v and 36v. each motor need 2.8A x 4 = 12A + 2 = 14Amp is there...
Thank you for sharing your ideas I have learn so much from your build. I have a question. How do you connect the power to your driver. does the...
This look great, it good to know it does work. I live in UK everything is expensive here, so I want to get it right first time and leave room for...
Thank you for your reply! I am thinking to do it another way, by joining 2080 with 2040 like a L shape have 2 cross beam under the 2040 at the...
I have got everything except the frame. The spindle i got is 1.5kw but its round require mount weight 3kg. I like your one fit nicly on 40x60. I...
This is the same size i want to build, you have some powerful motors. Have you tried cutting wood and soft metals, how well does the vslot frame...
Teflon Nice machine, do you mind share what size is your spindle? nice and quiet. I am deciding between 0.8 and 1.5 kw.
