Separate names with a comma.
Some features disabled for guests. Register Today.
...to ground on the VFD side. [ATTACH] You need to install a switch or jumper wire between the VFD terminals marked FOR and DCM. I feel it would...
...a short wire link and soldered on the lead going to the Z limit switch (the Ooznest macro uses this to detect probe contact.) It's important...
...drag chain on the workbee is very close to the wire for the Z limit switch. This spacer moves the drag chain 3mm further away from the gantry...
...I needed a decent solution for mounting the Temco CN0097 limit switches that I purchased on eBay. The options that are available will not work...
I wanted to have more robust limit switches on my machine. Been through way too many of the micro ones which required tapping the small holes in...
...for the Sphinx. The one thing that stood out to me was the limit switch placement shown in the instructional guide. I built my own variant of...
My version of a suitable housing for the reprap endstop that come on mounted on a small Pc board from china I needed something that wasn't a PC...
A simple holder for a standard microswitch to be used for limit switches. 3D-print it out of ABS or Nylon, it needs to give a bit when inserting...
...night and was trying to figure out the best placement for the micro-switches on my CNC design, so I broke out my calipers and took...
Laser cut mounts for limit switches. Made from 3mm acrylic. For mounting details, see my build (OX Tale | OpenBuilds) or message me. The X and...
I wanted to put some limit switches on my V-slot C-beam machine. This is a range of 3D printed mounts which can be applied to other V-slot...
...feet or meters per second). HOME = 2.0 <> Where your home SWITCH is located for that axis. (in inches or mm) HOME_OFFSET = 0.0 <>...
...one with the controller mount, control butons, fan and emergency switch. I do have to try and insert tabs in the cutout of the outer edge....
...if the calculator has multiple machine profiles so you can easily switch between full rating and derated profiles as needed. Once you’ve got a...
Design in SketchUp, work up the part and output the Gcode for your CNC machine! [ATTACH] Version 1.5 released 24 Dec 2020 - upgrade now!...