Separate names with a comma.
Some features disabled for guests. Register Today.
I understand! Thank you! I will leave the firmware as is for now, maybe I will have to make changes when I will connect the steppers and the limit...
Sorry to ask again, here is the answer I get from the spark concept about connecting the CO2 laser: "For the laser, you will want to connect to...
Thank you Peter! So, the firmware for now its ok just with the XY configuration. I have ordered the stepper motors, a 24v/350w psu for the xpro,...
I keep tinkering and managed to compile and upload the firmware, instead of using the hex file. I also downloaded the trial lightburn and looking...
I cannot thank you enough! I feel relieved from this wiring stress! I will keep posting in my thread as I make any progress, hoping my project...
Thanks! Does this wiring look better/right? I feel a little confused about what you said for the test button.
Dear Peter, thanks for recommendation, now I installed the grbl_v1.1h.20190825.hex from here Releases · gnea/grbl. Yes the PSU is different from...
Hi, this is a very nice build! Congrats! I am in the process of doing something similar to this, with an 80w tube and 100w PSU. Could you help me...
I will look for that! Have found a thread "K40 ACRO Conversion" that the builder uses xpro, and I take a look at what he have done! Thank you!
Yes I saw what choose wrong! Havent seen your post, and already installed this v1.1h, custom, XY Homing 20190830 firmware from here Flashing Grbl...
I believe I have upgraded the xpro v2 from grbl 0.9, to grbl 1.1h. I have downoaded the hex file from here Releases · gnea/grbl, and with the way...
Thank you for your answer! Sure goggles are on my list, wouldnt try anything without goggles. I will check if i can upgrade to grbl 1.1 and will...
Dear friends, I need your help with my project. I am building a 80w cnc laser. I havent started the build yet, I am collecting the parts. So far...
I have seen your previous videos, and thats what i wasthinking, but i wasnt sure. Thank you DazTheGas for the respond! Are there any chances to...
Hi! Very nice work! Did you know if these files will work with the ooznest ox machine? I am planning an upgrade using acme screws, but my concern...
Very nice! I am planing to do an upgrade soon!
Hi friends, hope you are all doing fine. I would like to ask for suggestions about my board settings and ooznest ox. My board is a chinese...
Hi, here is what finally worked for me. [ATTACH]
@SccS thank you very much that was very helpful and clear! I will try this as soon as and i will post about.
Thank you very much for your answers! Althought i am not sure that i have understanded what i have to do. I assume i have to connect like this?...