Separate names with a comma.
Some features disabled for guests. Register Today.
Both are running off of one driver. The motors came from flea bay...it's supposed to be a Kysan 1040095.
I've got the "stock" configuration going (2 steppers/2 leadscrews)--though I'm using 20X60mmm extrusions and a 12" X 12" bed. I've very happy with...
I'm getting this dual extrusion thing dialed in. I now just need to get my heated bed hooked up so I can try some ABS/HIPS. [ATTACH]
That's using pretty much the default settings in Cura 13.11.2 with a wipe and prime tower.
Here is my first dual extruder print on my C-Bot. I still have to do some minor adjustments but it seems to be working well so far. [ATTACH]
No they don't all home to X first. I believe Repetier firmware let's you configure the homing order. I've modified the latest version of Marlin...
@ruggb- Issue #1...might be caused by QUICK_HOME being defined (uncommented) in the configuration_adv.h file. QUICK_HOME causes the X & Y axis...
Sorry, I missed your post...I haven't done a lot of printing on my C-Bot. Mostly just fiddling around with different things. With that said, I'm...
Here is the modified E3d Cyclops/Chimera carriage mount that I came up with (meaning I modified Carl's design). It seems to work well when made...
I got my E3d Cyclops in. Yeah! So before I start designing a carriage to fit...does anyone else already have one designed?
Carl, Are you using actual E3D v6 hotends? Brian
Carl, Have you had a chance to test out the modified version of Marlin firmware that I posted earlier? Brian
Actually, they are opposite. The trim pot goes toward the mosfets and usb plug with the 8825s.
I got a Ramps 1.4 with five 8825s off of aliexpress. Everything seems to work fine. Granted I've only done some basic testing at this point--no...
Carl, As promised, I've attached the code for my modified version of Marlin. Please test and let me know how it work. Brian
Yes, the restriction on homing to maximums has been removed in the latest version of Marlin. I've already verified that my code changes work with...
I really don't know what's going on with my clone endstops but leaving the red (VCC) wire unplugged on the RAMPS board make them work properly....
Carl, Thanks! That's very similar to how mine is configured at this point though I'm still struggling with the endstops. Are you using all...
Carl, I've got a couple of questions... 1) What firmware and version/branch are you using? Could you provide a link? 2) Could you provide a...
Maybe I overstated the "don't work" part just a bit... I was told that because the endstops themselves use pull up resistors they will not work...