Separate names with a comma.
Some features disabled for guests. Register Today.
Understand that one :D
I am in the process of doing a cabinet for the Lead 1010 with high Z mod right now. It has a 48" X 48" base. The height of the enclosure I am...
@Peter Van Der Walt I wanted to give a update on this. I put my BlackBox back together this morning with the replacement boards. Everything...
Sent a message and linked to this thread. They almost made it sound like you would get it figured out. I am not clear on what they were planning...
I took everything apart again and I don't see anything burnt/blackish. The solder looks fine for the fan pin headers. Nothing loose. The only...
I took the blackbox apart remove the board from the pins and inspected everything and no bent pins. I re-seated the board and put the blackbox...
I don't think i bent anything. I will take it apart and verify that all the pins are good between the two boards.
Ok so I think I was wrong. There is a green LED that lights up right beside the RGB markings on the PCB. I do not have RGB lights that light...
The RGB light is on and all the drivers work. You can jog it around. All the limit switches work. No power to the fan pins that is correct.
So I am having a similar problem. I powered up my blackbox and everything seems to work fine other then the cooling fan. I took the top off of it...
Thanks for the reply. I told myself I was going to wait for your reply. But guess what I didn't and I flipped it around. I get a burr under my...
Hey ClaudeJER I was thinking of changing mine around because of the same reason you stated earlier. I see you have more Z clearance then the...