Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks. That is the answer I was hoping for. Anyone know where the setting in Mach3 is? Google is not my friend today. All the motors actually...
Hi everyone If I trigger either the E Stop or any limit switch, everything stops moving as it should but the Z Axis then sinks quite quickly...
I get it when doing the pocket in single or multiple passes. Thought is might be runout on the spindle, but that does not make sense otherwise it...
My machine does exactly the same thing when entering the wood. Does not do it on corner two, three or four. Very frustrating.
Are you not trying to solve the problem in the wrong way? A typical Beisemeyer table saw fence isnot perfectly square as it moves across the...
You got to learn to sacrifice a bit extra of your timber to give the cutter safe passage. After chipping a cutting face on a pricey bit, I had to...
There is so much already here. Read it and you will be a long way to answering your questions.
Did the face of your VFD just fit through the hole or did you have to remove it? Looks very elegant. What is the big coil looking thing next to...
Seems like these links are all broken.
So made some progress on solving my problem. Changed the steps from 1/16 to 1/2. Tried single step but that was noisy and missing steps. I also...
Thanks David Very interesting points. The error was happening at line 800 odd, so not the licence and I have done lots of bigger files. The ply...
Interesting. Would Mach3 without a proper licence do a random act of vandalism on my workpiece? I am pretty sure my key is genuine, but will check.
This has happened a few times: [IMG] My machine, not an OX but my own build using OpenBuild parts, is behaving erratically. Controller: Chinese...
Sketchucam is brilliantly simple to use but also quite frustrating at times. You cannot click and forget, you have to inspect what is to be cut...
Hi Robert Do these spacers make any difference to the stability of the Z motor versus using normal alu tube spacers. As it sits directly above...
Looks very clever :-)
Check your asymmetric bearings are not too tight. I was making great circles until I decided to tighten it all up a bit. This led to some very...
;)
Thanks. Very interesting.
Please could you explain your double belt system. From the photos it is difficult to understand what you are trying to achieve. Thanks very much.
