Separate names with a comma.
Some features disabled for guests. Register Today.
Would this program any of the DS2 chips, including the Cube 2nd gen?
Does anyone know the screw size for that holds the filament feed to the cartridge? I managed to drop one, and it followed my missing socks to...
I just flashed my printer with the 1.11 firmware and the printer now thinks I am printing in ABS and I have never had any ABS in the printer. The...
May have better luck looking into this firmware for an older cube printer, it has the same mycroft password, as well as using the same chip to...
Where would we retrieve these, I bought mine used and pre-activated? Also, for the other printers mentioned in the firmware, can the firmware for...
I used a similar process, just not as polished as yours, but ran out of the 1 bottle I had, glad to see someone as frugal and time-conservative as...
One thing working with the printer while waiting for the issues to be patched, I have double faced tape for carpet that works well for replacing...
I would not blame you, since I have already cancelled one order because I didn't rtfm :)
I have a voucher for Digikey, so how about this? https://www.olimex.com/Products/PIC/Programmers/PIC-KIT3/resources/PIC-KIT3.pdf or this?...
Also, which is better, the pickit or the chipkit?
If you visit the ip of your printer, you get the screen below.
I would like to reduce the size of the firmware file, and saw a large-ish section is not accessed by the firmware update. It is the web demo for...
Great to hear we are on the track to proprietary filament independence! Anyone able to forward the IDA files, I would like to continue the...
I would like to be rid of the cube software, any suggestions on how to do that?
Ok, so I just turned on code protect.
Looking into the config bits, which are the penultimate line in the hex file with debug off: :102FF000FFFFFF3CD979F8FF5B0DEDFFF7FFFF7F87 And ON...
Since I don't have a hardware debugger, I used IDA to look into the 1.07 hex file, and found these ascii labels in the code. Of particular note...
I have IDA and could help with the dissassembling, I have been looking through the image695.hex files and can rule out several sections as data only.
Can you now save the disassembled code to files, then some of us can help?
Have torn into the firmware hex 1.14b, and most of the data from :10D0D000 to :10981000 seems to be text characters encoded in the firmware like...
