Separate names with a comma.
Some features disabled for guests. Register Today.
Here is the culprit
So I've been running just shove test stuff but I Keep getting these random circles in my work for no reason what an I don't wrong in using maker...
Yea I know it's set for 8 though, should I try 4
Have everything running great, but for some reason the z axis isn't going to the depth it should be. im cutting the diamond calibration gcode in...
And when I have chilli set to jog it one mm it seems like its jogging 2 inches? It's this something I need to set up as well? In the video when...
[MEDIA]
so i think have it figured out kinda, i dont know why but the stepper isnt slipping anymore, wht i did was once i saw that the motor on the right...
ok so what ive done is i disconnected the motor that was not running properly the left on the y axis. now when i disconnect that i get no movement...
OK so I need some help again, I have it all done just getting the motors down in chilkipeppr. I have the x and z axis moving in chilli and I have...
heres the video [MEDIA]
so i think i've figured out the y axis andi have it going right now, but then the left nema on the axis started making this noise and being really...
Hey guys, quick question. I'm building the ox kit right now and I'm wiring, from the nemas it looks like they're about 20g wire, and in the kit...
Why do you think drilling the eccentric is better. And you only did that for the x axis holes so I think there's 8 right 4 on both sides.
I gotcha, that makes sense now. Drill out the holes with the spacers. That makes alot more sense. So this is to tight the way it sits and it would...
So this is a problem then and it's running to tight? You think drilling out the holes on the bottom wheels? Wouldn't this message the eccentric...
Thanks Ronald for the advice, now when you say set the eccentric spacers to not feel bumps and feel instead roll smoothly, the only thing I'd I...
I can upload more photos or videos if that would help also. If you notice at the end the whole frame moves from the resistance from rolling it back
So almost done with my ox build but wondering if I have to much friction or resistance on the axis. I have the eccentric spacers as open as can be...
Thanks for the reply I have watched some videos on the ox and I feel fairly confident in my building skills of it. Do you think the swm3d is a...
