Separate names with a comma.
Some features disabled for guests. Register Today.
Here's how I connected caps to my limit switch inputs. They're .47 uF 63v electro's but any voltage above 6v should work fine. Make sure you have...
Try Try removing the wires from the limit switches and E stop at the controller board. See if that improves the situation. When I first wired my...
Just curious , has anyone successfully printed 3d with their OX?
I've had some trouble with belt slippage lately and thinking of going to a dual belt system. Does saw dust and chips cause a problem if it gets...
I think if we could define a systematic method of testing these solutions and have a cost vs performance chart, it would certainly help with...
My CNC pro card has been a bit of a problem from the start. Mostly overheating or loosing its way, even converting to inches halfway through a...
If you have the room, how about a cover that slides sideways to give full access to the machine. This would make cleaning the tracks out a lot...
A really nice build, the cable chain really cleans things up
If Ex music teacher Steve of Clayton, Australia is listening, give me a call..
I'm having too much trouble with my cnc xpro drivers and thought I might pick up a set of TB6600 drivers from ebay. The prices vary quite a bit...
having trouble with my A channel, keeps shutting down, even with the current setting at 40 %, its not the stepper, as I've swapped it over with...
I've been throwing a rag over the wheels and drive, as one of my projects has a deep gouge when a big chip got thrown onto the track. I LOVE...
If anyone in Melbourne -Aust needs heatsink glue, I can give you what I have left over. I bought a tube and only used about .5 ml, It will just...
An interesting observation- I was trying to get my limit switches running yesterday, (I've got the cnc xpro card) and had the fans disconnected. I...
Ive got the version 2 grbl .9 card, but the z limit switch has no effect. $21 =1 looking at the drawings on my version, the limit switch goes to...
having a problem with grbl. I run some GCODE, seems to go fine, if I try to repeat the same code without reset, it appears to run in inches...
Now you have turned the current down, slowly increase it to see if they run smoother. I found I had to find a happy medium between overheating and...
I had similar problem. turned out to be the driver chips overheating and shutting down until they cooled. solved it first by turning down the...
Anyway, new question: I have started wiring all the electronics and now it is time to get the two nema's 23 that share one axis to work together....
looking at the above comment, it refers to grbl 0.8. I noticed in wikipeadia grbl .9 that the hard limits and homing is $21 and $22 respectively...
