Separate names with a comma.
Some features disabled for guests. Register Today.
Did you resurface your spoil board after you adjusted the wheels? That would cause the issue you are having if you didnt.
Get the new one, and buy some extra brushes after a few years. :D
Has anyone successfully used the Stock plate maker to do a full depth profile cut with a 1/4" spiral carbide upcut in hardwood? Id appreciate...
@Scotty Orr Two questions for you. Do you sell these, and can I access the collet nut with 2 wrenches?
Is this filmed in time lapse?
Make sure you have your stepper motor signal cables and frame earth grounded. Not doing so can cause issues with emi interference,
I can't attest to the stepper online BOB. but it looks fairly similar to the wantai motors one. Just from the picture and not doing any research...
Why not just get a quality usb or ethernet motion control board. Ive heard good things about the ESS smoothstepper. It will replace the wonky...
My generic chinese crap paralell breakout board has started missing steps. This board will replace my failing hardware.
If you source your parts from Aliexpress you can spread your dollars farther. I recently made a cbeam plate machine from chinese sourced parts....
I used duct tape for mine.
Image by RobertW posted Jan 21, 2017 at 8:41 PM I found a tapped hole in the cbeam end plate for the limit switches. :) Here's a pic of the...
In all that mess there is a cabinet saw, thickness planer, jointer, drill press, drum sander, bandsaw, dust collector and a working C-beam...
Ha, I was just thinking that I needed to buy a mobile solar system for my daughter's crib ;)
I have 10 micro switches, a 24x24 sheet of 1/4" lexan, a cnc machine and 5 minutes. Using Aspire, I pulled the 2d silhouette off the 3d model of...
Thanks, for some reason my brain had a disconnect today. The mini adapter plate makes sense. I was going to screw them into the extrusion. LOL....
@Mark Carew ......Do you have any resources to show limit switch location on a c-beam build, as well as mounting strategies? I understand the...
You're going to want to install limit switches at either end of each axis. A quick google search turned up this result(62ms) Primer on Homing and...
You'll have to format the drive. Boot from the Windows Xp disk and delete the partition containing Windows 10. Then install normally. You may need...
What are the amps Rms of your motors. This will determine which bob is more appropriate. At work and at home all the machines I've used are...
