Separate names with a comma.
Some features disabled for guests. Register Today.
I have all those sizes and they all work because I have 4 laser cutters. What you need is to find out - what size lens fits the head you plan to use.
I use the Cohesion 3D on my ACRO and K40 and works great with both. I has sockets for stepper drivers but also has a header available that will...
I put an interlock on my machine so the laser would not fire if the cover was open. Helps keep the fingers in place. Hooked it up in series with...
Acrylic needs heat to vaporize. With clear acrylic the light from a diode laser will pass right through and do little. The only way that I have...
OK - most 1.6W laser's are two wire so you need a FET to drive it.
What laser are you looking to use? I use that same UNO shield with a TTL laser and only used what came with the laser. The other thing is you...
You have bad firmware and nothing will work until you find and load good firmware. What firmware are you trying to use and where did you get it....
This is a known problem with GRBL/Adruino. During boot the spindle pin will float for a bit. The way I fixed it on mine was to put a 1K resister...
Machifit CNC Z Axis Slide Table 50-60mm DIY Milling Linear Motion 3 Axis Engraving Machine
Yes - I am still using T2. Reasonable price and it does everything I ask of it, and new features are being added all the time. Also the support...
The best way to describe it is a waste board with the L in the corner's so the laser frame won't move or twist. The 2020 frames are quite light...
Since I am at it here is the SVG nd DXF files for my longer legs. They are 1 1/2" longer.
I took the existing leg design and extended them some and laser cut them. In the picture you can see the original leg next to the new longer one....
I don't think the system is high enough to put an adjustable bed in. In fact I had to make longer leg's to be able to focus my laser after putting...
I can't speak for the gentleman above, but I have printed several and they have work with not problems with both a spindle and the Makita router.
Here is a picture of the Z-axis installed. I made a couple of new holes in the X gantry and mounted it directly. I can now get all the height that...
The laser engraver you saw in the picture I got from BangGood 1 1/2 years ago. I had to modify the gantry's that came with it - making the holes...
Spent some more time today trying things out with the ACRO system and did my first gray scale image on cardboard. [ATTACH]
I just started using mine tonight, but from past experience its not something I would try but I could be wrong. Take a look at the mass of the...
OK - I got first light on the ACRO system tonight and am happy with the the system is working. [ATTACH] I bumped inot a few issues along the way...