Separate names with a comma.
Some features disabled for guests. Register Today.
I drawing a 14mm circle in vcarve. G90 G17 G21 G0Z1.000 G0X0.000Y0.000 M3 S12000 G0X53.184Y65.175Z1.000 G1Z-3.200F127.0...
I have a cnc system which uses the thread rods, 2 Y motors, x motor and z motor. All connected with the coupler with 2 set screws between the...
well I figured it out late last night. It was a misaligned anti-backlash on the left side. Once I figured out I did another hour of testing and...
I have a 1000 x 1000 C-beam I made about 2 years ago. Be using it every week since this time, with only minor issues. About a month ago I have...
Thanks for all of your support openbuilds.
In more inspection it looks like it more serious that first thought. I pulled some of them today. Looks like so far 15 of 16 have damage. I...
Here 2 pics to show the groves that started and how the wheels are breaking apart. I have 14 of the 30 in different stages. [ATTACH] [ATTACH]
Jim, I actually have since raised the X up a little bit. Giving me more Z axis clearance. I choose to go with the 1000 x 1000 simply giving me...
I purchased 30 sets of the Xtreme Solid V Wheel white wheel sets for my CNC in late Feburary from the openbuilds store. I been having some moving...
No custom milled plates. 100% of the parts purchased at openbuilds, which made it very easy to put together. I did not make a 3d model. If you...
18 lbs 8 oz.
After hours of hitting a dead in I figured out one of the switches was malfunctng and triggering a fault. I turned off the homing switches and...
tinyg and cnc has been working fine for about 2 weeks. Then today started to cust some simple work. Then 5 minutes it just stops moving. Since...
Jamie. I will when i get back from a business trip on Wednesday. The major change i had to make was on the motors tr settings. ie $1tr It was...
I been debating over getting a CNC for several years. So I finally made the choice try my hand at making one. I been looking and several ideas...
When I connect my laptop to my tinyg in the garage it zero in on the lower left conner. Then starts to cut correctly as chilipeppr says it...
Over the years I have had cheap soldering irons. I find when I finally forked out the $$ for a nice one it made a different. As other said...
@Jonathon Duerig, Thank you so much for the suggestion on the motors pots. Mine were set to the default as recommended by tinyg wiki between...
Mark, Thanks for the reply. Wiring seems to be ok. As the Y-Axis is moving just making the buzzing/vibration in the aluminum rails. I did...
On the final path to finishing this project.... So I have a 1000mm x 1000mm cnc. Which the Y - axis has 2 motors at the rear turning each a 8mm...
