Separate names with a comma.
Some features disabled for guests. Register Today.
Stumbled on this thread because I have a JTech laser hooked up and also want to use the tool on/off for the IOT switch to the router. Mainly to...
The description on the website for the RoütER11 is pretty basic. What advantages does it have to the Dewalt or Makita? Is their anything I would...
mine is setup to about Y 810mm x X 720mm So you are looking at 31.64” x 28.1”
I have a 1010 and one of my biggest gripes is the way the spindle mount attaches to the c-beam with the four right angle brackets. I'm always...
Yup. Checked the stack of spacer and washers and they just don’t engage. I’m going to pull it all apart and figure it out. It’s been like this...
The issue seems to be the z axis movement or lack of rigidity. I replaced the front most XL gantry plate and Xtreme wheels and that completely...
Black Box
This sounds like the right track, some of these I didn't think of but may be mitigated by my setup. I use the Dewalt router. I actually took the...
It's hard to describe, but yesterday while standing next to the machine manually holding the vacuum hose to clear chip and dust I finally watched...
Max travel speed of the LEAD CNC? I've mounted a JTech laser on my LEAD this weekend and have been pretty happy with the results. I've been trying...
From my understanding of backlash, I should notice an issue when cutting out something like a full circle. I do this regularly out of 2'x2' sheets...
I've done that for two sided work and it has been okay. I'm making a lot of boxes that have two halves, top and bottom. I actually modeled and cut...
My LEAD CNC with BlackBox has been working pretty well. I have the z-probe and for the most part no real issues. As I've gotten more experience my...
I've been sitting here cutting away while building dedicated cart table for the CNC and I had a thought. If I anchor the machine to the bench I...
My LEAD has been working pretty well so far. I'm a bit disappointed in the z height available, and I've dug through some old posts on from the...
Crude drawing below, but this is a new machine, and I do believe it was all done correctly, but I will triple check. The drawing is more of an...
Finally finished my first CNC router (LEAD 1010) and have been looking for spoiler board ideas that find a nice balance between having 100+ holes...
I've got a little rotational play in my Z axis and not sure what the best way to resolve it is. If I grab the spindle mount from the front there...
I've finally finished my LEAD CNC with BlackBox, and I can already see that having a physical emergency stop button, but haven't been able to find...
I ordered my LEAD in parts over the last month. When I opened my wiring kit today it has the older 2-lead wires and limit switches. The old video...