Separate names with a comma.
Some features disabled for guests. Register Today.
So I have a 1500mmx1500mm Routakit with a 2.2kw Spindle. I continue to break Delrin wheels on the Z gantry. Would converting to linear rails...
It is advisable to ever use more than 2 linear rails for an axis? In my case, the axis is spanning a gap ~2m long. I'm concerned that extrusion...
Hello, I'm new to this forum and I searched it as much as I could for an answer but did not find it. I currently have a Shapeoko 3 XXL and it's a...
Hey! I have a question ^^ I am currently working on a 3D printer/CNC machine/laser plotter (cutter). I would like to use linear rails for the...
I’m interested in adding pillow block linear rails to a 1000 c beam actuator. I plan to place them on the outer edges of the 80mm side of the...
The more I read the more I learned to a point of information overload. I will build either a 4x4 or 4x8 Cnc. Mostly will be cutting MDF, melamine...
I am probably struggling so much with this because after buying a CNC 3018 recently, I dove into trying to build a DIY gantry-based CNC without...
Hi sorry if most or all of this has been covered but looking at possibly upgrading my Lead 1010 1. Raise x gantry to gain another 1" or 2" in Z...
Hi everybody, I'm new on the forum. .I'm actually designing a 3d printer based on Prusa I3 model, personal project. .I chosed V-slot system for...
Looking for suggestions on how to identify the exact position of the gantry plate on a C-BEAM linear rail with millimeter accuracy. Not sure if...
Hi I'm looking into building a laser cutter and I have trouble deciding between two options: Should I use the V-Slot from open builds or build a...
Im looking for some advice on how to mount a tripod, with 1/4 mounting screw to each end of a 20x60 linear v slot rail. I don't want to have to...
