Separate names with a comma.
Some features disabled for guests. Register Today.
Hi folks, (relatively new here - just know enough to be dangerous) I've scored what's essentially an OpenBuilds OX. It's functional, but needs a...
What I am wondering is if I can hook a Raspberry Pi to an OpenBuild's Black Box controller and use something like cnc.js to send projects for...
I am currently using the Raspberry Pi CNC Hat (2.6) to drive a 40x40in ACRO Laser etcher (OpenBuilds ACRO 1010 40" x 40") So far it works great!...
Hi everyone. I'm new here but I have my first issue using my CNC. I have a well built DIY CNC router with A raspberry PI , BCNC and an Arduino to...
I have been slowly building a CNC router, off and on for the last two years. I recently discovered the Black Box MCS on the site, and was...
Hi all after some advice as i've blown another laptop in the shop so Im going to start using a pi instead of a laptop for sending the g-codes to...
My machine was ran using bcnc from a raspberry pi 3. The micro sd card that was in the raspberry pi had corrupt file and the bcnc stopped loading...
Hey guys, I'm interested in the Acro sysem. My goal is to have the head position itself at a random xy location, and then move to another random...
Hi all Need some advice. I’v been looking at this spindle [IMG] eBay But my concerns are I’m trying to keep this build as small as possible as...
[ATTACH] OpenBuilds CONTROL Software Hey guys, check out the all new and free OpenBuilds control software. OpenBuilds Machine Driver - Interface...
Hi all I’ve just finished my first cnc build and am hoping someone can help me with a few problems that I’m having My design is based off the...
This post is going to cover connecting and getting to work a Xbox controller with a Raspberry Pi and bCNC. This will probably work also with any...
