Welcome to OpenBuilds Community

Signup today and join in on the fun!

Sign Up
  1. Items listed here are not affiliated with and have not been reviewed by OpenBuilds. If you have any questions regarding an item, please contact the original poster.  OpenBuilds is not involved in any private FREEStore-related transactions. Those seeking new OpenBuilds parts should visit www.OpenBuildsPartStore.com

    Dismiss Notice

SEEKING 2 or 3 TB6560 chips

Discussion in 'FREEStore' started by Krashlnd, Sep 26, 2016.

  1. Krashlnd

    Krashlnd Well-Known Builder

    Hello all, I am looking for 2 or maybe 3 Toshiba TB3560AHQ chips. I have a bunch of nema 23 steppers (4 wire) I can trade. The steppers are MAE HS200 2231 4 amp. Large motors. Looks like they have a 8mm shaft. Ill buy the chips if you do not need the motors.
     
    MaryD likes this.
  2. Krashlnd

    Krashlnd Well-Known Builder

    Just noticed my title. ISO of ;) Should have been just ISO. My fingers go faster than my mind I guess:nailbite:
     
  3. argelio

    argelio Well-Known Builder

    i need three nema 23 steppers (4 wire)
     
  4. Krashlnd

    Krashlnd Well-Known Builder

    Where are you located Argelio?
     
  5. argelio

    argelio Well-Known Builder

    my zip code is 33180
    i have 3 bl-tb6560-v2.0
     

    Attached Files:

    Last edited: Sep 29, 2016
  6. Krashlnd

    Krashlnd Well-Known Builder

    Awesome. Private message me your mailing address. If you want to swap Ill have them out your way asap.
    Steve
     
  7. Krashlnd

    Krashlnd Well-Known Builder

    Steppers are on the way and shows delivery by monday 10/03/16
     
  8. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    Do you have any more Nrema23 motors?
     
  9. Krashlnd

    Krashlnd Well-Known Builder

    Yes. I need to test some
     
  10. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    Is there anything you would want to trade for them? I have a few ads up in the freestore right now, but plenty of other items in my parts bins.
     
  11. Krashlnd

    Krashlnd Well-Known Builder

    How many are u looking for?
     
  12. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    I would need at least 3, but 4 would be perfect.
     
  13. Krashlnd

    Krashlnd Well-Known Builder

    Let me test what I got. All have 8mm shafts. 450 oz/in
     
  14. Krashlnd

    Krashlnd Well-Known Builder

    Also Anthony. Where are u located
     
  15. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    I am in Niagara Falls, Ontario, Canada but I have a Niagara Falls, NY shipping address I use for my business.
     
  16. Krashlnd

    Krashlnd Well-Known Builder

    Ah. Perfect Shipping through Canada's customs are fun
     
  17. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    Did you have anything in mind that you would want to trade for if the motors test OK ? I have about 9 or 10 SNo5 inductive endstop sensors that I am not using.
     
  18. Krashlnd

    Krashlnd Well-Known Builder

    Sounds good. I'll finish testing today and get back to you. All of these steppers were used in the R&D dept. I get a bunch a month so I should have plenty this week
     
    MaryD likes this.
  19. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    FAntastic. Thank you so much!
     
  20. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    Any word on the steppers?
     
  21. Krashlnd

    Krashlnd Well-Known Builder

    Anthony I have 4 good steppers so far. All have 8mm shafts nema 23. Looks like 450 oz/in. I sent Argelio 4 last week. I should have more with lesser torque monday.
     
  22. Krashlnd

    Krashlnd Well-Known Builder

    Argelio. Hope all is well in Florida. Stay safe buddy. Thats goes to all in Florida. Argelio, If you need anything you have my cell number. Id be glad to help out as much as I can.
    Again you and your family stay safe and keep us posted.
    Steve
     
  23. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    I PM'ed my details to you.
     
  24. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    Did the steppers test out OK?
     
  25. Steve Marsh

    Steve Marsh Well-Known Builder

    Sorry Guys. Been out of town for a week. Just got back in. I am out of steppers at the moment.
     
  26. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    Was wondering if you got any more Nema 23 motors yet?
     
  27. Krashlnd

    Krashlnd Well-Known Builder

    Nothing We are having a problem with the Swiss supplier. Not sure if it is something to do with end of year stuff. Pretty slow here also
     
  28. Anthony Bolgar

    Anthony Bolgar Veteran Builder

    OK, no problems.
     

Share This Page