Welcome to Our Community

Some features disabled for guests. Register Today.

Bolting extrusions together without tapping.

Discussion in 'Tutorials' started by Grantman, Jun 5, 2017.

  1. Grantman

    Grantman Veteran
    Builder

    Joined:
    Apr 10, 2017
    Messages:
    68
    Likes Received:
    30
    Figured out how to connect extrusions using an M5 tee nut, 8mm long screw, and a 5x10x1mm washer. Still requires a hole for tool access to the screw, so not quite as pretty as printed connectors, but you can easily take this apart. I used bamboo skewer pieces to keep the screws lined up with their holes till tightened.
    20170604_181844.jpg 20170604_180851.jpg 20170604_181142.jpg 20170604_181156.jpg 20170604_181308.jpg 20170604_181421.jpg 20170604_184318.jpg
     
    #1 Grantman, Jun 5, 2017
    Last edited: Jun 6, 2017
    Anthony Bolgar and MaryD like this.

Share This Page