Welcome to Our Community

Some features disabled for guests. Register Today.

CNC Router table question...

Discussion in 'General Talk' started by Terry Briley, May 8, 2015.

  1. Terry Briley

    Builder

    Joined:
    Oct 26, 2014
    Messages:
    6
    Likes Received:
    0
  2. Ronald van Arkel

    Staff Member Resident Builder Builder

    Joined:
    May 7, 2014
    Messages:
    469
    Likes Received:
    231
    Sorry Terry,

    But they are sold with metric sizes, the gantry uses two 20 * 60 mm and one 20 * 40 mm V-slots. Close and easy conversion to imperial is 4/5 * 2-2/5 " and 4/5 * 1-1/2".

    -Ronald
    OpenBuilds México
     
  3. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Dec 20, 2013
    Messages:
    1,360
    Likes Received:
    538
    That gantry is designed for use with V-slot sections not 8020 extrusions. The differing wheels of the two systems don't work the same.
     

Share This Page

  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Building needs!
  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provides resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop theirs!

    Donate to FairShare!