Welcome to Our Community

Some features disabled for guests. Register Today.

Files to make OX parts

Discussion in 'General Talk' started by Carl Stoner, Feb 27, 2015.

  1. Carl Stoner

    Builder

    Joined:
    Nov 2, 2014
    Messages:
    9
    Likes Received:
    0
    Are the files available to cut the nema 23 plates, with the lead screw hole?

    They have been out if stock every time I've checked the parts store. I made a wooden mount several months ago, but because if it's bulk, it limits the height my Z can travel.

    Also, which GT belts are best for my 4' X axis? I see GT2, and GT3, ( gt2 with 3 mm pitch?). I think I read that a 3 mm pitch belt is better for nema 23, under heavier load.

    I've got a lead screw on X now, again it limits my travel and depth of the bed, and is wobbly, due to the bed being 2' wide, (4' long)

    I'm planning to use 2 nema 23s on side rails with the belt riding in the top groove of the 20x80.
     
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,855
    Likes Received:
    1,525

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice