Welcome to Our Community

Some features disabled for guests. Register Today.

Freemill Post Processor Output

Discussion in 'CAM' started by adhd_nerd, Oct 28, 2014.

  1. adhd_nerd

    adhd_nerd Well-Known
    Builder

    Joined:
    Sep 27, 2014
    Messages:
    3
    Likes Received:
    8
    Does anyone here use Mecsoft Freemill? If so, what is the post processor you use to output g-code for grbl?

    http://mecsoft.com/freemill/

    Looking for a decent 3D cam program that can import STL and create tool paths. Free is preferred since I am still learning
     

Share This Page