Welcome to Our Community

Some features disabled for guests. Register Today.

n00b a bit lost

Discussion in 'CNC Mills/Routers' started by jaysef, Jan 26, 2016.

  1. jaysef

    jaysef New
    Builder

    Joined:
    Dec 1, 2015
    Messages:
    1
    Likes Received:
    0
    Hi There,

    I am looking to build my first OX CNC router. A friend of mine works at a machine shop and offered to mill the gantry plates for me free of charge. I sent him the .dxf drawings I found online, however, the drawings I found do not include dimensions. He needs those to be able to cut them I guess. I am lost as this is all new to me. Any idea on where to find these dimensions or if there are a better set of drawings that perhaps include dimensions? These are the drawings I found: FL3D OX CNC Plates by FutureLab3D – YouMagine

    Your advice and help is appreciated well in advance.
     
  2. Giarc

    Giarc Master
    Builder

    Joined:
    Jan 24, 2015
    Messages:
    512
    Likes Received:
    249
  3. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Dec 20, 2013
    Messages:
    1,403
    Likes Received:
    564
    Critical dimensions shown in the attached pdf. Mainly what is important is the spacing between the opposing rows of wheels. You should be able to scale everything else based on the dimensions given. These drawings are based on the V8.1 files found here: OpenBuilds OX CNC Machine | OpenBuilds
     

    Attached Files:

Share This Page