Welcome to Our Community

Some features disabled for guests. Register Today.

Prusa I3VS with 12X12 Build area

Discussion in '3D printers' started by Trentjw, Feb 2, 2015.

  1. Trentjw

    Trentjw Well-Known
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    5
    Likes Received:
    11
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,925
    Likes Received:
    1,095
    Looks great @Trentjw very clean build
     
  3. Trentjw

    Trentjw Well-Known
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    5
    Likes Received:
    11
    still waiting on my dual Extruder went with the micron 3dp [​IMG]

    it is a clean and simple design that should be pretty trouble free for what it is
     
    Mark Carew likes this.
  4. Trentjw

    Trentjw Well-Known
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    5
    Likes Received:
    11


    Finally got the printer up and running and dialed in for the most part pretty pleased with the results after some pretty epic failures the V slot stuff sure made it a lot nicer
    I have done a lot of small changes from the proto type to the release version including adding the provisions for an Y axis Lead screw setup to upgrade from the belt setup however it can still use the belt system as well

    I am selling the Steel parts as a DIY kit or as upgrade kit for those with the wood or plastic 3d printers currently working with openbuilds part store to get a hardware bundle setup in their store with all the hardware parts to get up and running until then I am including a list of materials that is needed besides my steel parts link to the page http://www.ncspecialties.com/computers/customcomputers/3dprinter/
     
    Mark Carew, rako and Kyo like this.
  5. rako

    rako New
    Builder

    Joined:
    Apr 26, 2015
    Messages:
    1
    Likes Received:
    0
    Is this kit available as a complete kit from openbuilds part store yet?
     
  6. Trentjw

    Trentjw Well-Known
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    5
    Likes Received:
    11
    the steel parts is available from my web site, openbuilds is still working on the bundle kit of the hardware parts however the web site has the list of parts that you can order from them posted
     
    Richard Barton likes this.
  7. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,925
    Likes Received:
    1,095
    This printer is a work of art! :thumbsup:
    Love how sturdy it is and the geared dual extruder fits right in to the no nonsense looking design.
     
  8. Trentjw

    Trentjw Well-Known
    Builder

    Joined:
    Dec 12, 2014
    Messages:
    5
    Likes Received:
    11
    Thanks been constantly improving and tweaking it now has the inductive Z sensor capability designed into the X platform waiting on my Water jet guy to send me the new parts
    and Thank you guys for setting up that mechanical hardware kit for this printer
     
    Mark Carew likes this.
  9. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,925
    Likes Received:
    1,095
    More then welcome thank you for the support as well :thumbsup:
     

Share This Page