Welcome to Our Community

Some features disabled for guests. Register Today.

Two color Drawmachine

Discussion in 'Other Builds' started by kallibaba, Aug 3, 2016.

  1. kallibaba

    kallibaba New
    Builder

    Joined:
    Jun 15, 2016
    Messages:
    8
    Likes Received:
    58
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,741
    Likes Received:
    2,407
    So neat @kallibaba looks like a lot of fun! Thank you for sharing :thumbsup:
     
  3. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,852
    Likes Received:
    1,524
    Would be interested in seeing more about the pen changer.
     
    MaryD and Mark Carew like this.
  4. MaryD

    MaryD OpenBuilds Team

    Joined:
    Apr 13, 2016
    Messages:
    649
    Likes Received:
    639
    Nice Work!
     
  5. JPKO

    JPKO New
    Builder

    Joined:
    Nov 9, 2014
    Messages:
    1
    Likes Received:
    0
    Hi !

    Which software are you using with your drawmachine for making draw ?

    JP Kormes (Paris - France)
     
  6. kallibaba

    kallibaba New
    Builder

    Joined:
    Jun 15, 2016
    Messages:
    8
    Likes Received:
    58
    Hi JP,

    I'm not a big coder so I make my drawings in ilustrator or inkscape.
    This I then with a CAM (in my case Aspire) in Gcode around which then from the Raspberry by Gcodeseder to the Arduino Nano with Grbl as machine control are sent.

    For Inscape, there are some plugins for something like that.
     
  7. lunknowl

    lunknowl New
    Builder

    Joined:
    Oct 26, 2016
    Messages:
    16
    Likes Received:
    1
    hi can you cut the plate for me because i dont have cnc or lasercut? thanks
     
  8. kallibaba

    kallibaba New
    Builder

    Joined:
    Jun 15, 2016
    Messages:
    8
    Likes Received:
    58
    It would be easiest if you look for a Makerspace or Fablab in your proximity. A lot of CNC milling machines and lasercuters can be used for a small fee.
    In principle I could of course the parts for you milling but I have at the moment simply too little time.
     
  9. Quoc Anh Le

    Builder

    Joined:
    Oct 15, 2015
    Messages:
    7
    Likes Received:
    0
    Can u share this file?
     
  10. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    So very clever! :D
    Excellent job
    Well done :thumbsup::thumbsup:
    Gray
     
  11. Colin Russon

    Builder

    Joined:
    Dec 4, 2013
    Messages:
    47
    Likes Received:
    24
    Do you have the Inkscape or the illustrator files for the plates?
     
    lufrgo likes this.
  12. lufrgo

    lufrgo New
    Builder

    Joined:
    Sep 29, 2019
    Messages:
    2
    Likes Received:
    0
    Hi!

    Does anybody know where i can find the files for this machine?
     
  13. lufrgo

    lufrgo New
    Builder

    Joined:
    Sep 29, 2019
    Messages:
    2
    Likes Received:
    0
    Did anybody around here get the files?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice