Welcome to Our Community

Some features disabled for guests. Register Today.

ALARM and LOCK

Discussion in 'Controller Boards' started by DavidCNC2017, Dec 5, 2016.

  1. DavidCNC2017

    DavidCNC2017 Journeyman
    Builder

    Joined:
    Nov 3, 2016
    Messages:
    30
    Likes Received:
    11
    Hi,

    Anytime I switch on my controller (arduino+gShield) GRBL Panel Control window has ALARM red knob and LOCK red knob activated.
    And I have to push UNLOCK button to start .

    Anyone knows what is going on with my controller?

    Thank You in advance
     
  2. JustinTime

    JustinTime Master
    Builder

    Joined:
    Dec 18, 2013
    Messages:
    917
    Likes Received:
    180
    Mach3 does that too. It's to prevent the machine starting before you've set it up. Just a safety feature.
     
  3. DavidCNC2017

    DavidCNC2017 Journeyman
    Builder

    Joined:
    Nov 3, 2016
    Messages:
    30
    Likes Received:
    11
    Thank You for Your help!
     

Share This Page

  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Building needs!
  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provides resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop theirs!

    Donate to FairShare!