Welcome to OpenBuilds Community

Signup today and join in on the fun!

Sign Up
  1. Items listed here are not affiliated with and have not been reviewed by OpenBuilds. If you have any questions regarding an item, please contact the original poster.  OpenBuilds is not involved in any private FREEStore-related transactions. Those seeking new OpenBuilds parts should visit www.OpenBuildsPartStore.com

    Dismiss Notice

FREE Mobile solar system with Batteries for trade

Discussion in 'FREEStore' started by Joshua Coke, Oct 13, 2016.

  1. Joshua Coke

    Joshua Coke Well-Known Builder

    Full system with 2 x 150W 12V solar panels with aluminum frames that can be adjusted for summer or winter. A Powerhub 1800 Xantrex - PH-1800-GFP - Power Hub 1800 Backup Power System
    and 4 x 100 amp hour fiber gel batteries that have 20 cycles on them and have been properly maintained on charging system.

    Will trade for 3d printer, open builds parts, anything interesting.
     
    MaryD likes this.
  2. MaryD

    MaryD OpenBuilds Team Staff Member Moderator Builder

    Shipping/Pick Up wise, where abouts are you located Joshua?
     
    Last edited: Oct 14, 2016
  3. Joshua Coke

    Joshua Coke Well-Known Builder

    It seemed to me that when someone is interested they post their zip code and the OP sent them a PM with the shipping cost, I am in northern IL.
     
  4. MaryD

    MaryD OpenBuilds Team Staff Member Moderator Builder

    Yep, just wanted folks to have some idea of the distance ahead of time. Thanks!
     
  5. Joshua Coke

    Joshua Coke Well-Known Builder

    I am away from home until Oct 20th, I will post pictures of the system later today.
     
  6. RobertW

    RobertW Journeyman Builder

    Ha, I was just thinking that I needed to buy a mobile solar system for my daughter's crib ;)
     
  7. stargeezer

    stargeezer Veteran Builder

    Hi Joshua,

    Can you tell us what sort of 3d printer you are looking for? I've got several that are not used right now. Various grades and cost, from from some expensive machines to junk I'd not trade to anybody for a bent paperclip. :) Some printers are just a embarrassment to anybody trying to make a good product.

    I even have far more than enough new parts here to either make up a kit for you to build or build you a printer as far as that goes.

    So if there's any particular printer or value you can express to us, I know you can get a trade.
     
  8. Joshua Coke

    Joshua Coke Well-Known Builder

    If you were to buy the system new it would be $2500. I have 3 working 3D printers and lots of parts also. I would like to build a Corey XY machine using linear rails/ openbuilds extrutions. I have all the electronics and motors I need. I also have several servo motors with drives I can trade for stuff.
     

Share This Page