Welcome to Our Community

Some features disabled for guests. Register Today.

Phantom part in part store

Discussion in 'General Talk' started by RHightower, Jan 13, 2014.

  1. RHightower

    RHightower Well-Known
    Builder

    Joined:
    Jan 12, 2014
    Messages:
    11
    Likes Received:
    2
    I was wondering about the last corner piece (60 degree for triangles?) in this picture -

    [​IMG]

    Is this going to be produced or is demand low enough to keep it only 3d printable for the time being?
     
  2. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,924
    Likes Received:
    1,095
    Hello @RHightower
    All of the ones shown with the exception of the 60 degree corner are there now. You can see them here:
    http://openbuildspartstore.com/brackets/
    The demand for the 60 makes it hard to produce so that one may take some time, but the rest are in stoc ready to rock! :)

    BTW love the avatar!
     
  3. RHightower

    RHightower Well-Known
    Builder

    Joined:
    Jan 12, 2014
    Messages:
    11
    Likes Received:
    2
    Thank you!

    I knowticed it in the big sketchup file and was wondering if I missed it some place.
     
  4. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Resident Builder Project Maker Builder

    Joined:
    Jun 28, 2013
    Messages:
    1,924
    Likes Received:
    1,095
    Nope, it never made it to the cut, but maybe some day :)
     

Share This Page