Build List
-
Active Filters:
it
Ancient Roland Table top Mill
The parts are now very reasonable.
C Beam CNC+Laser
You will be following the assembly of the mechanical kit and how i integrate the electronics into the final build.
My 5' by 5'
I have constructed frame out of 1 1/2" square tubing. Have my Y aces mounted. and awaiting parts.
my version of xl
A table top version of the open build xl router kit set build. This use of c - beam and xl kit set was coupled with Mach 3 controller running on Dell opti -plex 755 and win 7 pro licence. A Dell opti-plex 755 empty case was used to house the controls and wiring , including the limit switch and emergency stop safety circuits
Build Author h3rb Views 2653
TEVO Little Monster Marine Vinyl Removable Enclosure
Make a vinyl burrito ENCLOSURE for your TEVO LITTLE MONSTER for < $30 (<$20 if you don't have your vinyl shipped!)
Build Author Hidro669 Views 2597
My custom world of tanks gaming desk built by Ragged Edge Eaming Solutions
summary huh... If it doesnt fit MAKE IT!
Absolute positioning hardware and software
Absolute linear positioning using deBruijn sequences.
Build Author Braden Masse Views 2505
Microwave Filter Tuner
The Microwave Filter Tuner (MFT) combined with the University of Regina’s tuning algorithm automatically tunes microwave filters by using a custom CNC machine with a computer vision system for identifying, mapping, and tuning each filter element, providing improved consistency, flexibility, and accuracy compared to traditional methods. The MFT is low cost and is capable of tuning multiple filter configurations with minimal preparation.
Router Box
This box is made from tough aluminum with plastic boards, helps hold WiFi Routers, Modems, or/ Ethernet Switches! The aluminum can resist the heat produced by these electronics, and the weight of the electronics, also being light itself. This box is the thing you need to hold your electronic devices!
Build Author bpatterson42 Views 2347
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".
Printer number 2
A Large Printer that will hopefully be able to print at least 45cm cubed
Something a Tad different
Future CNC router kit design
Build Author Cam Garrett Views 2238
Sturdy Motorized Photographic Copy Stand
i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.
Angle grinder converted into electric drill
How to convert an angle grinder into an electric drill? Remove the angle grinder, leaving only one main motor, and then find a suitable intermediate roller with a point drill to assemble it.
SharkBits Holder
Get organized with the SharkBits Holder!
Build Author David Hartkop Views 2106
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Build Author Sir Bagels Views 2030
CNC Auto-pipette
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
Build Author Neil Scott Views 1920
Barcelona Build
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
Build Author Gary Caruso Views 1762
OpenPull From CNC Kitchen.. attempt
This project is a Pull tester for material testing or structural testing with stress (force) data logging, I don't have plans for strain logging but that might be down the road.
My Lead 1010
This is a fully loaded Lead 1010 and located in a shed measuring 3 by 2.50 meters. Here i build my guiyats by hand and the help of my Openbuilds friend! Pure for hobby.
Build Author Johnny Reich Views 1022
ProLight 1000 Mill Retrofit
Update a 20-year old bench top milling machine with OpenBuild Ecosystem electronics.
Build Author Elias Ramburger Views 927
600 volume 3D-Printer
Hello. I build this 600 by 600 printer and hope to share it. I plan to sell custom builds with my website in the middle of this yeahr while making all parts accesibble online for replacements and own builds. My plan was to build a better and more accessible big volume 3d-printer as cheap as possible. I got some inspiration of the ender creality 3, the crazy-Print xyz 300 and the veho 600 tronxy which was simply not relaible and satisfying overal.
Gerber 404 Retrofit
Not sure if the Blackbox X32 is the right option here, just looking for guidance.