Build List
-
Active Filters:
route
Non OX CNC Router
This CNC Router is to 95% made of standard parts and almost all of them from the http://openbuildspartstore.com/.
Small Red OX
A small router for thin plate stock
Build Author Joey Selzler Views 11888
My JGro CNC becomes an OpenBuild Project
This is the story of my progression from the JGRO cnc router design to using the OpenBuild system. In the process I think I have learned some things about cnc routers and the accuracy required to make a good build.
Build Author Nugz Views 12392
Angus : A Slightly "Beefier" OX
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
Our OX CNC Router Project
Our version of the OX, a Cartesian CNC Router Build. 1,500 mm Y-Axis, 1,000 mm X-Axis, 300 mm Z-Axis - Lots of Fun!
Leveling Gantry
Large leveling platform to hold a 3hp router
OXO
an 8x4 CNC Router based on the OX
Build Author SlyClockWerkz Views 15552
1000mm X 1500mm OX CNC -- Fiber/Garolite
Building the full size OX.
no xp cnc
This is my first cnc build, never used one before and don't know too much besides what i've read a little bit about them online. It's probably going to be about 31" y axis with hopefully around 4ft x axis, z height is still to be determined.
Build Author Richard Bugland Views 7874
Heavy Inexpensive CNC
Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.
Build Author d0rk1e Views 6837
OXford (OX fortified)
150x75 cm OX with additional Y axis supports and hopefully a working double belt system
Cheetah 1.1 CNC Router
I hope to have a working prototype built soon.
ROUX - A Routy-OX Hybrid
ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.
TABLE OX Router/3D-Printer
OX MultiMachine
Build Author Leon Style Views 3947
AluVault MINIMAX
Easy build cnc router with t slot profile and nylon machined part
Little Big OX
A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.
Build Author winand Views 16763
YAOR (Yet Another Openbuilds Router)
Yet Another Openbuilds Router, my version :-)
Router / Plasma Prototype Build
this is my first attempt at a CNC Table
CNC MILLING ROUTER
CNC MILLING ROUTER
Build Author John J Talavera Views 17196
CNC FOR EVERYONE!
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
Build Author John J Talavera Views 7343
CNC FOR EVERYONE, THE DUCK!
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Build Author John J Talavera Views 10741
CNC FOR EVERYONE TITAN CNC ROUTER
www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!
Build Author Mark Carew Views 13501
Phlatprinter MKII
Phlatprinter MKII Foam Cutting Machine
Build Author richthorn Views 7431
Aluminum Ox
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
spunks.cam
Design of a multifunctional CNC machine.
Build Author Jovian Views 26414
Proteus
Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool