Build List
-
Active Filters:
as
LEAD 1010 PLASMA Add-On
LEAD 1010 PLASMA Add-On is a great modification you can do for your LEAD 1010 to convert it into a metal cutting monster machine!
5'x10' CNC Plasma/Mill Table
Plasma Mill CNC
Z Floating Head
It's a Z floating head idea. Works well. Recommend cleaning the inside of your holes well with Q tips, and polishing the 1/4-20 bolts with car wax and you won't need oil as it slides perfectly. Hope this helps
Build Author CONUCON Views 2693
3DTwinX Gantry CNC System
Belt driven 3-axis linear system for high precision and low costs. > Threading and linear real cutting needed
Build Author jaron kennell Views 4090
Rezo 1390 100W CO2 Laser
This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. Rēzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans
Pneumatic cnc cutter with festo drive
CNC Glass cutter
My ACRO Build
An ACRO laser put together with some repurposed and some new parts.
Build Author Jason Moore Views 9977
Lead1500 Plasma Table w/THC
lead machine plasma table with Black Box, and Torch Height Control
Dash X Direct, Cross-Beam 3d Printer
This is the next version of Dash, now operating much closer to its potential. Please message me if you need anything, such as Simplify3D settings, material information, design intent etc. Since the Pack-and-Go zip file is fairly large (120mB), here is a link where it can be downloaded: https://drive.google.com/file/d/1Q3ygyo_tTrB4UYIV62_wtCSCbWuE3krT/view?usp=sharing Note: I use Solidworks 2022, acquired through their Solidworks for Makers program (check it out!). A super deal at $100/yr
Build Author OpenBuilds Views 17529
BlackBox X32
The next level of CNC motion control solutions. Packed with advanced new features and built on the reliability of the proven BlackBox system
Custom 40W Laser Cutter
So this is my custom 40W build. I wanted to make another laser similar to the one I built but a lot smaller and an all in one system so that if I ever decide to do a farmers market or something similar, I wanted to be able to put the laser on the back of the car and drive to whatever location. I think it's going to work. It will be see-through with lights and screens eveywhere. The lights alone should attract people like flies. That's the plan anyway.
Budget friendly starter build
DIY CO2 laser build. Budget friendly, 2020 T/V-slot profiles and scalability.
Plasma Table 006
Fast, inexpensive, near-zero maintenance, and 2+ years of near-daily use.
Dedicated Rotary Laser Made from Scrap and Spares
A clone of https://openbuilds.com/builds/dedicated-compact-rotary-axis-laser-engraver.10204/
Dedicated Compact Rotary Axis Laser Engraver
Compact Dedicated Rotary Axis Laser Engraver
Y-1200 co2 laser
Y-1200 Build The Y-1200 has a cutting area of 1200 x 600mm and the main chassis has a external size of 1620 x 955 x 450mm. The recommended power output is 60-90W, this can also be increased with the use of an extension box. designed by furtherfabrication ROB CHESNEY FREELANCE INDUSTRIAL DESIGNER.
M10CUBE PICO CNC. A Universal Controller
An attempt is to be a Unified Modular Controller based on M10CUBE platform. For GRBLHAL and MARLINHAL applications. HAL porting is under way 1 - WIZnet Pico Clone W5100S-EVB-Pico 2 v- 6 X StepStick. Not sure about the sixth driver, (Pico pins limitation) . External connectors for larger drivers 3 - Opto - isolated spindle PWM. 4 - HMI 5 - I/O on diferent modules and Ethernet 10MBPS communication. Patches will be written to GRBLHAL for Ethernet I/Os (Interrupted).
Build Author Glenn Weston Views 9206
"AcroCadabra" My Acro Laser built with my C-Beam XL
Well I built a C-Beam XL around a year ago, I am still learning things as I make stuff with it, it has been quite a wonderful learning experience. Now I have gained enough confidence and knowhow to Mill the required Plates to build an Acro Laser System using the Acro Laser Sketchup Model. I have pulled the Model apart in Sketchup, isolated the Plates and generated the G-Code to cut/Mill the plates. I have used Sketchucam to generate the G-Code. I Use Mach3 on my C-Beam XL to Mill.
Build Author Shaun Weitzel Views 4670
OpenBuilds Lead 1515
First build of a Lead 1515!
Horizontal Cantilever or Vertical Diode Laser Engraver
Light weight portable Laser Engraver (6.5lbs - 12lbs)
My C-Beam build and modifications
Modified C-Beam which I plan to add a laser module and eventually convert to C-Beam XL size.
Based on 608 tube Plasma Cutter
Simple steel tube design Plasma water table
Build Author Leonard Cross Views 33546
Workbee CNC Router/Laser/Plotter
A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
K40 upgrades
Cheap chinese K40 laser upgrades, including 60x30cm working area, MKS or SKR controllerboard (smoothieware or marlin, not yet decided.) Light, psu and a bit more :)
Custom build 80w Co2 Laser Cutter
Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.
GHOST Case by Copper Pour
GHOST Case build for the OpenBuilds Black Box Motion Control System
Home made CNC Plasma Cutter
Not completed yet but it does work, I will be changing small things as I finish the build and I have learned a lot from this build I am looking forward to finishing this one and Building another maybe larger table.
GIGAWATT 2.1 LASER CUTTER
Progetto di un laser CO2 da 50w Autocostruito, con scheda di controllo MKS Sbase v.1.3 Firmware Smoothieware versione CNC Struttura realizzata con profili T-slot 20x20 e 20x40
ME - Laser CNC
Build of a small laser engraver using V-slot profiles and 3d printed parts
Fastmill CNC
Very cheap CNC made from laser fired and bent parts.
big_recnc v2.0
cnc made with a 6mm metal body .
Corexy laser
I have tested my Opt Lasers laser module on a "open" frame for some time. Decided that I want to test a corexy setup and combine it with a boxed/enclosed design - my goal is to get high precision + a safe setup with protection from the laser light + a fan to extract the smoke/exhaust..
Build Author theracermark Views 2761
Reviving the Origonal PhlatPrinter with BlackBox
Reworked PhlatPrinter Gen1 Adding dual nema 17s to all 3 axis Supprot for carriage to insure even dept cuts Lighting for view of cutting area
Build Author wackocrash5150 Views 17015
45W CO2 Laser Build
A co2 laser build that is heavily inspired and based quite a bit off Pedro Fernandez' 50w co2 laser build. This is my first build post so, bare with me.
Some Improvements on the Workbee 1000x1000
Improvements both real and suggested for the Workbee assembly
(Smaug) 100w 1500x1000mm CNC Laser
Laser CNC made with mostly Openbuilds and amazon sourced components. Lots of 3d printed components as well. The main purpose is to cut EVA foam.
Build Author boutrous Views 7377
Laser Rotary Attachment
Build Summary updated after parts list completed
Build Author Jacob Christiansen Views 5187
ACRO 1010 with custom Z axis
This is my build for an ACRO system with a custom z-axis for changing z height for focusing or for adjusting depth when making multiple passes when cutting.
Build Author Genetoys Views 2176
Oven Dog
Building a printer that can fit inside and operate at ~200 C oven temperatures
Build Author Retsaj Views 51330
Standalone Torch Height Controller for CNC Plasma Cutting
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
Laser engraver
CNC laser with GRBL firmware on board
1.3m x 1.3m RF laser cutter
RF 100w laser cutter build, aluminium extrusion
Build Author M1dn1ghtN1nj4 Views 7852
The Beast
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
AcoustoPlot3D
The Sphinx has all the components I need, except it will need a taller vertical lead screw, the same length as the horizontal ones. It will also need legs. So I need to start with the Sphinx parts list, then make a few changes.
CNC Plasma Table 006
Inexpensive plasma table. Accurate, fast, and low maintenance.
KRE CO2 2x4 Laser
Large Format CO2 Laser Cutter
Build Author Robert Mech Views 7603
LayerFused X301 - CoreXY Large Volume Printer
The X301 is a CoreXY 3D Printer that has a small footprint and a large 300x300x330 build area. The open style of this printer breaks the "Cube" mold of many other printers in this class but still retails rigidity and great performance.
Build Author Mark Carew Views 206050
OpenBuilds ACRO System
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
Build Author Quinnthouzand Views 2631
Mustardo - The Mustard Bot
The goal for this bot is to lay down mustard on sausages and burger patties in a smooth and sexy way that looks good for the camera.
Learning how to build
I made a 5x10 foot cnc out of the parts I bought on this site. It's been upgraded and tinkered with ever since. The end goal is to learn enough to learn to build a large 10x10 foot 3d printer.
Vulcan: 750x1200 V slot 90W Co2 Laser
Tried to get best value and minimal footprint!
Build Author Joe F Views 6826
Rack and Pinion Cartesian Mill
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
Z Axis for ACRO
Created a small Z axis for the ACRO motion system. I wanted to more easily adjust the height of the laser to accommodate various thicknesses of material, without having to manually loosen screws to adjust. Also wanted to be able to vary the height for multiple cutting passes on some materials. Try to stick to a similar aesthetic as the original ACRO system and plates.
Build Author SandeepsCNC Views 10497
Raspberry Pi CNC Software
The main objective is to build a software which can completely run on a single board computer, Rasbperry Pi, to reduce the complete cost of building a cnc machine. The software is extensively tested and can be run on any raspberry pi 2/3 boards. With no G-Code dependency, you can do complex 3D relief carving to simple tasks with simple GUI based project development environment. Please go through the YouTube channel for more details https://youtu.be/8KOXqLpvscg
Build Author Daniel Stewart Views 1111
Ultra sun cutter
A sun cutter only using mirror and glass balls with x and y table movement
Build Author Ariel Yahni Views 50390
UK40OB
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
LEAD CNC 1010 Laser Modification
Easy All-in-One Laser and Mounting Kit for your Openbuilds CNC.
Build Author Mark Carew Views 6495
OpenBuilds PowerCase
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
Acro 1010 with 10 watt Laser
Built a 32"x40" ACRO Kit for my 10watt Endurance Laser. Put it in a stand alone clamshell cabinet, added a 340cfm 6" fan and variable speed switch for the fan. Using LIght Burn for my primary software. It seems to be work well.
Piggy back engraver for ShopBot
Built from leftover T-Slot extrusions plates and hardware from other defunct projects.
Plasma CNC machine
The plasma CNC that I have built has a water table that measures 1350mm x 650mm. The water is flooded onto the cut area while cutting and recycled around with a pump. This is to reduce smoke, cool the metal being cut to reduce distortion and also to keep sparks to a minimum. Most of the machine has been made from aluminium , the frame and table from steel, the water table, stainless steel.
1250x1000 Build
A new design of my based on a couple different machines I have seen both on openbuilds and youtube. In the end will have a and X/Y workspace of 1250mm x 1000mm and a Z axis range of about 200mm.
Build Author mytechno3d Views 23979
Router / plasma cutting table ( Rack and pinion )
Heavy DIY plasma cutting table
Build Author Kims3DIY Views 16644
Beamlazer Laser cutter CO2 100W
Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.
Build Author Neil Scott Views 1875
Barcelona Build
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
Build Author Bruce Walker Views 5741
BD's Burn Box - ACRO Laser Engraver System
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
Build Author Fábio Pires Views 5926
Frezar - Desktop CNC
This is a small desktop CNC inspired by the Mini OX project. It's designed with the nema 17 motors in mind. It's a 650mm x 500mm machine that it will be used to mill cast acrlic.
Laser Rotary Tool / Attachment
Rotary attachment to engrave cylindrical objects on laser machines
Build Author Mark Carew Views 18725
V-Slot™ Nema 23 Linear Actuator (Belt Driven)
This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts.
Build Author Mark Carew Views 118986
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Build Author pedrofernandez Views 33910
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
Rotary Axis for Laser Engraver/Cutter
This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.
x_y_module laser engraver
low cost 2 axis cnc laser, really portable and easily expandable
Build Author mjenkins5720 Views 1897
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author mytechno3d Views 33631
Plasma cutting table
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
Build Author Lasersc Views 3646
The D & R TigerPaw Trilogy
Hopefully this will be a quick guide to one way that you can add a laser to an existing CNC router.
Minimalist Laser Platform
Minimalist laser platform built with Makerlink connectors and modified Nema 17 stepper mounts used as gantry plates.
Build Author James Evanko Views 5423
Laser Displacement Golf Ball Scanner
Getting an accurate scan of a golf ball can be difficult with general-purpose 3D scanners. This purpose-built golf ball scanner uses a very accurate Keyence LK-081 laser displacement sensor with an Open Builds linear actuator for the vertical axis and a Sherline CNC rotary table for the turntable. Scan detail is determined by the sample step size and can be set arbitrarily based on desired scan time.
The Franken Rotor
Yes another K40 Franken machine dedicated for round objects,,,
Large format laser
Large format laser build for Student use at my school as well as some personal use.
Vacuum laser table
Large 10’x6’ vacuum table made from steel tubing and 1/4 inch steel plate
Build Author Todd Brous Views 4197
Modified Acro with build plate, Z-axis and OPT Laser
Modified Acro for laser engraving. Extra height and and a sturdy build surface for part fixtures, custom mount plates, OPT Laser, and a Z-Axis.
Cnc mill, Plasma cutting and weld table
A functional table for plasma cutting, welding, tooling........
Build Author viktop Views 20877
Simple Cnc System (arduino Grbl)
Arduino powered simple CNC system using GRBL firmware. Designed to give the most function using the very least number of parts at the lowest price.
3D printed Laser Engraver
i´ve designing this laser taking care of every part to be functional, This laser has Endstops mounts on the corners and the X axis both sides too. The corners has fasbelt tension knobs for easy operation. The laser mount has adjustable knob to manually rise or down the laser for focusing purpose. all the parts have been printed at 65% infill a 2 perimeter lines just to make the parts stronger. Attached you will find a part list with quantity and link where to buy. SIZE 1mts x 75cm Built area
Hevavy duty 1300mm x 1300mm laser cutter Ceramic tube Servo motors
Starting the next Laser build, Plan to complete within 60 days.
Build Author Mark Carew Views 4984
OpenCase Mounting Kit
The OpenCase Mounting Kit makes wire management quick and easy!
Build Author holographic Views 6424
Laser DIY
How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow
Build Author tshilling Views 31581
K40 12x24in rebuild (In Original Case)
Rebuilt the internals of a K40 to allow for a 12 x 24 in cutting area while reusing the same external case and not touching the laser tube.
Ballmasters 1605 1500x1000 ox cnc
Upgraded 1500x1000 Ox cnc to 1605 Ballscrews on the Y axis. along with the J-tech laser to do most things.
100w Laser Cutter Build Log
I rebuild my 2 meter tall 3D printer into a 100w laser cutter
Build Author patnap71 Views 5398
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Build Author pedrofernandez Views 15922
Co2 Laser Cutter/Engraver Rotary Attachment
Vslot rail system at work again, laser cutter/engraver rotary device for cylindrical objects .
W|W plasma/drag knife 1500x1500 (floating head & z-axis)
Step by step designing and implementing of my plasma approach
Project Infinity co2 laser
1m x 1.8m 60w co2 laser build.
Build Author Doug Rowley Views 3348
My Workbee 1010
This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.
Build Author CoreCube3D Views 18530
CoreCube3D - A CoreXY 3D Printer
Building a CoreXY based 3D printer using primarily parts from China on eBay. Large 500mm frame.
Build Author pedrofernandez Views 8567
K40 Cube Laser Cutter
The k40 cube is a laser cutter build using mostly stock parts of the chinese k40 laser
Build Author Rob Taylor Views 15663
Portable Diode Laser Cutter
Integrating custom machined components and off-the-shelf CNC components to create a portable diode laser etcher with air assist and reasonably substantial z-axis travel.
Build Author pedrofernandez Views 13413
The Franken Forty
This is a K40 machine conversion!!