Build List
-
Active Filters:
v
Build Author Anthony Bolgar Views 4843
Air assist/fume collector for Diode Laser Engraver
This is a work in progress
Build Author obmilllivebuild Views 4695
Live C-Beam Build @ MRRF2018
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
Build Author Gerrald Views 4677
Pong CNC
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
Build Author jaron kennell Views 4600
Rezo 1390 100W CO2 Laser
This laser is a beast. Designed by Jonathan Frost, and built with 45x45mm aluminum for ultimate rigidity. It has a 4'x3' bed with a pass through that can be utilized to cut full 8x4' sheets of plywood, and has a motorized bed. Rēzo is not only faster and more capable than lasers like Thunder Lasers Nova 51 and Aeon Nova 10, but the final build costs are 40-60% less than said commercially available machines. Plans can be found at https://rezo1390.bigcartel.com/product/rezo-1390-plans
Build Author Kevr102 Views 4548
Ooznest Ox CNC 1000 x 750
A few mods on my Ooznest supplied Ox cnc Encountered a few minor issues along the way but now all sorted.
Build Author ZacharyB Views 4513
Arizona OpenBuilds MiniMill CNC
I ordered the OpenBuilds MiniMill from the OpenBuilds Parts Store http://openbuildspartstore.com/ They were out of Motors and Electronics when I ordered so I had to source these items elsewhere. But it turned out well doing it this way.
Build Author JerryD Views 4489
1500x1000mm Adjustable Height
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
dave's RepStrap
PVC foam Core frame made from a Delta facet display. a curb find while walking home.
Build Author Keith Davis Views 4450
Torq Xtrdr
Light enough for high speed #3dprinting Strong enough for high speed #3dprinting
Build Author Mogens Kusk Views 4432
Belt driven 1200mm x 700mm x170mm axis
CNC router
Reborn as the Soccer Pitch for our Robot Spider Soccer game - Robotics/Maker Club Teaching Cart
The Soccer Pitch for our Robot Spider Soccer game
ROUX - A Routy-OX Hybrid
ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.
Build Author spark2 Views 4358
C-Beam - Sphinx 1000x1000mm inspired by Kyo
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
Build Author h3rb Views 4355
TEVO Little Monster Direct Mount Extruder
Cheap, experimental Modification to Tevo Little Monster's bowden system for the extruder
VoS
3D Printer based upon 3d printed parts and open builds componets
AVR SMD Daughter Board
SMD AVR Solderless Daughter Board
V5- 2in1 ( 3dPrint+laser Engraving )
2in1 ( 3dPrint+laser Engraving )
Build Author Skoobs Views 4229
Pretty Standard + Slave X Axis
Planning my build, just looking for design input at the moment. I definitely want a slave X axis. I am potentially going to go with one of the 1500W Chinese water cooled spindles.
Build Author THE LINK Views 4226
2020 First build.
Probably cheapest DIY build youl see.
Build Author mytechno3d Views 4224
Mining Rig
Crypto Mining rigs with vslot rail
Hybrid shapeoko Xcarve cnc router
My scratch build using shapeoko, xcarve, and custom parts.
Build Author TouchPadKing Views 4204
1500mmx500mm Kossel Delta
Please, look over my build and make any recommendations you can think of! I haven't figured out how long my arms need to be yet. Nor have I done any shopping around to find better prices...
Build Author Dmknerr Views 4180
Server Rack Printer
My first project build. Concept build to use an existing 7.5 ft tall server rack as the frame. This ptoject may never be completed.
Build Author Robert J Rissell Views 4089
Remix of Sage's Delta-Six
I'm looking to build a large build-volume, accurate, steady 3D printer with the eventual aim of swapping in a diode laser to allow for use as a cutter for printing/cutting parts out of balsa sheet for building model aircraft.
Brewery tank supports
Trying to design modular and evolutive supports for my brewery tanks.
Build Author 3D Meister Views 4035
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Stargeezer Vertimill
Next up will be the electronics package. My parts bins are overflowing with boards so this may be the hardest decision to make of the entire build.
Build Author CandlerCustoms Views 4000
Candler Customs - Custom CNC Machine
Inexpensive Custom CNC Machine or swappable Laser Engraver utilizing OpenBuilds ACRO System
Build Author Leon Style Views 3999
AluVault MINIMAX
Easy build cnc router with t slot profile and nylon machined part
Horizontal CNC V-Beem v1
V-Beem horizontal milling machine built on OpenBuilds components. Simple structure, great expansion possibilities, high stiffness.
Piggy back engraver for ShopBot
Built from leftover T-Slot extrusions plates and hardware from other defunct projects.
20x60 to Dewalt 611 Mount (a.k.a the Rook)
Dewalt 611 Router mount for mounting onto 20x60 v-slot
Build Author Forestbird Originals Views 3862
Lead 1010 Build - Anything but stock.
This is a lead 1010 build that I wanted to have a little fun with. I purchased the whole Lead 1010 kit, and felt like studying a few shortcomings of the original to see if I can improve it or just have some fun with it.
20x24 inch Fixed Gantry Mill
I have shared many pictures of this project it is now complete I have had my first cuts on this machine and it is solid , still learning the new motion Controller. The Acorn is more like you would find on a commercial built CNC or CNC Lathe.But it does have all of the functionally one needs
Build Author islahcnc Views 3816
islahcnc&design
I will post soon some more details.
Build Author Vegard Humlen Views 3765
CNC Coating Machine
The purpose of this machine is to mix two parts of conformal coating with different viscosity in exactly 1:1 ratio and distribute the fluid on to PCB to seal and make it waterproof.
Build Author Crazzy French Dude Views 3751
PeeNaPle_V1.4b
PeeNaPle_V1.4b is a BoB controller board for 3D Printers, CnC and cartesian machine, using the latest Teensy_4.1
Build Author Ted Moyer Views 3738
LEAD 1515 HIGH Z MOD 4KW ER20 7.5 KW VFD
OLD Lead 1010 High Z Mod converted to Newest Lead 1515 with High Z mod, slimmer cbeam motor mounts, thrust bearings etc. Extended by original table out and upgraded my 1.5kw VFD and Spindle to 4kw ER20 Spindle and 7.5kw GT VFD
MakerSL style vice - using just off-the-shelf-parts (NB UNTESTED WIP)
An attempt at copying the https://openbuilds.com/builds/makersl-msl-8-ob-vise.4084/ using just off-the-shelf OpenBuilds Parts - no machining
Build Author Craig Hollabaugh Views 3591
Hyatt and My Journey to Tonehenge
I'm conducing guitar loudspeaker cabinet fabrication technique research (material type/thickness, mechanical joints, adhesives, etc) and how these relate to cabinet/speaker coupling and enclosure resonance with respect to psycho-acoustics. Basically, does one speaker cab sound better than another and why?
Build Author Fabio Bertuzz Views 3531
DutziDelta RepStrap
Fascinated for some time by 3D Printing. Now, after studying countless forum posts, blogs and similiar stuff, i want to Start with my own build. Maybe a bit much but usually i thrive with the challenge.
Build Author TimVukman Views 3417
Unique Z
My original Tevo Tarantula kit was ok..... I had issues with the X gantry staying level. I got rid of the wheels and replaced them with linear block bearings. I still had some issues with the X gantry. I swapped out the plastic parts with aluminum which was much better. Still not what I want yet
Build Author Doug Rowley Views 3396
My Workbee 1010
This is a workbee 1010 build using the mechanical parts from Open Builds. The electrical and electronic parts were from a prior build of a Root 3 CNC by Sailor Pete.
Vertical Mill
This will be a CNC milling machine. My goal is to make this mill for the minimum cost I can while not sacrificing quality. In hope of staring an educational YouTube channel on CNC milling and 3D Printing. Along with when to use both.
Build Author Cortellini Views 3213
The FEEDBACK FRACTAL Build
The Feedback Fractal Project (Project) - building "A Monument For Our Time." As its intent is to build a monumental sculpture, the Project will produce an object d'art. Yet, once begun, the Project has evolved a life and character of its own. I continue to follow the thread woven by the materials, the processes, and the people that come to it and in the end the work will not only be a faithful rendition of an image and a concept, it will also be a tapestry of the story of its making.
Build Author Srđan Marković Views 3187
Second machine
Machine with 12,5Nm closed loop steppers or servo steppers
Rail Builder
glue/staple/eject 1 Axis driven Rail building machine.
Build Author Darren Dickson Views 3113
3D printed CNC Machine
So I thought I would make the Leon van den Beukel version three 3D printed CNC Machine, it is the third incarnation so you would expect a relatively bug-free CNC Machine with a strong foundation.
CNC China Router Conversion to Open Builds System
China Router frame with linear bolts, Nema23 and the icing on the cake “open build parts“
ME - Cloner 3d printer
I decided to start designing this printer, this will be my solution for a more rugged printer that you can use as workhorses...
Build Author James Evanko Views 3047
Ball Trajectory Machine
Need to build a machine that accurately positions objects for processing by a computer vision algorithm? Here is an example of a machine that does that for a ball trajectory application. The black anodized V-rails work well for applications in optics and imaging where the machine needs to stay out of the limelight.
Build Author Keith Davis Views 3024
Vulcan Bot
A 200mm x 300mm x 200mm workhorse that never needs leveling due to Posi-Drive Leveling design.
Travel Printer
Build using standard parts as much as possible, Open Builds etc. To keep printer usable for more materials will be trying a heated bed with rotary elec union for the thermistor and power.
Build Author CONUCON Views 2998
3DTwinX Gantry CNC System
Belt driven 3-axis linear system for high precision and low costs. > Threading and linear real cutting needed
c-beam XLarge with ZLarge
XLarge with ZLarge
Build Author James Evanko Views 2988
Sherline C-Beam with Offline Controller and MPG
This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.
Build Author George Motichka Views 2972
Transformer
I wanted a machine that could easily switch between 3D Printing and Laser Engraving
Clock repair stand
Open source clock movement stand
Build Author Robert Huxford Views 2851
High Intensity Dive Light
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
Build Author Ken376 Views 2771
Welded project cnc first try
Kind of hard to see in this pic now lining up drive s and finishing framework
Budget friendly starter build
DIY CO2 laser build. Budget friendly, 2020 T/V-slot profiles and scalability.
T Nut Holder for V Slot
This is a T Nut Holder for OpenBuilds V Slot System. Useful when you want to keep t nuts in place, for example when you're mounting something vertically.
Build Author h3rb Views 2682
TEVO Little Monster Marine Vinyl Removable Enclosure
Make a vinyl burrito ENCLOSURE for your TEVO LITTLE MONSTER for < $30 (<$20 if you don't have your vinyl shipped!)
My ACRO Build
An ACRO laser put together with some repurposed and some new parts.
ivern
Toying around a concept. Inputs are welcome on whether to use lead screw or belt drive. My lead screw will be single start 500 mm lenght, 2 mm pitch and 2 mm lead. Nema 17 motors will be used. All veterans, suggestions please.
Build Author Braden Masse Views 2539
Microwave Filter Tuner
The Microwave Filter Tuner (MFT) combined with the University of Regina’s tuning algorithm automatically tunes microwave filters by using a custom CNC machine with a computer vision system for identifying, mapping, and tuning each filter element, providing improved consistency, flexibility, and accuracy compared to traditional methods. The MFT is low cost and is capable of tuning multiple filter configurations with minimal preparation.
CNC Linear Slide for DIY project
Low cost cnc linear drive for making any xyz cnc structure
MOVABLE ART TO SCREEN WALL-MOUNTED TV
This project produced a movable framed canvas to cover a wall-mounted flat-screen TV when not being viewed, which at the touch of of a switch moves down below the TV and sound bar. The same switch is used afterwards to return the artwork up to cover the TV again. Photo shows mechanism without the canvas frame. See other photos.
Build Author bpatterson42 Views 2385
Inverted Y C-Beam Machine
Similar to C-Beam Machine build, but with inverted Y-axis assembly to shield drive screw. Integrated XZ gantry can be fixed to any solid surface. Build dimensions are 36" x 36" x 6".
Build Author Stan Howe Views 2362
Bee the Boss
The frame of the CNC is going to to Bee a basic Work Bee with maybe 1 modification to the spoil board attachment. This will be located on a custom bench housing the electronics and vacuum. I plan to install Stepper online steppers, drivers, power supplies, and break out board. I will add a 1.5 KW water cooled spindle, with a radiator. The fans from the radiator will pull air from a filtered enclosure for all the electronics.
Build Author hbtousa Views 2305
Quack Ball
Quack Ball is a game in which the objective is to knock down moving ducks. The ducks are protected by a barricade that moves at a very fast speed. The game can be played individually or by two or more players. Each round consists of a total of ten targets to shoot and each player will have four balls to shoot. Prior to beginning play, a player selects how many ducks, maximum four, the player will knock down continuously. If player fails games is over for that player.
Build Author Genetoys Views 2295
Oven Dog
Building a printer that can fit inside and operate at ~200 C oven temperatures
Dedicated Rotary Laser Made from Scrap and Spares
A clone of https://openbuilds.com/builds/dedicated-compact-rotary-axis-laser-engraver.10204/
Build Author Suhmanda Views 2222
DIY CNC SPINDLE
CNC SPINDLE FOR DIY ROUTERS AND MILLING MACHINES ITSRS-985 MOTOR HAS MUCH BEFINITS THAN ANY OTHER DC MOTOR IN MARKET
Build Author David Hartkop Views 2136
Humanitarian Medical Instrument Sterilizer Made from RepRap Parts
Instructions to build an open-source off-grid medical instrument sterilizer that can be used by aid workers in places without reliable electrical power
Hevavy duty 1300mm x 1300mm laser cutter Ceramic tube Servo motors
Starting the next Laser build, Plan to complete within 60 days.
Build Author Sir Bagels Views 2064
CNC Auto-pipette
Senior Design Project Bennett Robertson, Megan England University of Iowa College of Engineering
Build Author Terone Burgenheim Views 2038
My CNC
This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.
Build Author Damian V-SLOT Poland Views 2021
LEGO BOX
Discover our unique DIY project that blends creativity, utility, and sustainability. This guide will take you through the construction of a LEGO display box, ingeniously crafted using offcuts of V-SLOT aluminium profiles and OpenBuilds accessories. Not only is this an eco-friendly approach to reusing surplus materials, but it also results in a stylish, functional display for your prized LEGO models. Whether you're a LEGO enthusiast or have little LEGO fans at home, this innovative project offers
Build Author Neil Scott Views 1956
Barcelona Build
This will be my second CNC build but this time a proper CNC not a small desktop model that I played with for a while to learn Gcode, It was great but now its time to start playing with the big boys and girls.
Build Author mjenkins5720 Views 1948
Modified LEAD machine
At the moment this build is in progress, I will be updating the files as I finish the remainder of the machine. This machine is intended to be a multipurpose CNC, but a bit bigger than a desktop unit. The machine is scalable in the X and Y axis.
Build Author Sprags Views 1853
C-Beam Kyo Sphinx 10060
More stuff here.
Galvos
3d printable galvos
MIT E-Vent | MIT Emergency Ventilator
Ventilator prototype based of OpenBuilds Stock parts
Build Author Bill325 Views 1585
One more life for a cube
Modify a Gen1 Cube printer into a small cnc router to cut pcbs and light (VERY light) milling work. Also easy to swap out the rotary head and mount a laser head for engraving.
ApiNui - CNC Router ( an oversized workbee )
Based on the WorkBee CNC, this is an oversized router built with a specific use-case in mind, for manufacutring beehives, and beehive components
Everything Else
Hi my name is crispin and I'm an aluminum addict.
Ox cnc improvements chain driven
Just ox cnc experiment
Build Author Jose Alezandre Views 1311
Mighty Chihuahua
The idea was to use materials from previuos failed projects into a succesful one. I have build this tiny but powerfull CNC machine mainly using the universal gantry plates for the X and Y axis. Also another innovative part is the fact that I assembled the Z gantry with 2 aluminum sections of 20X40 and one aluminum seccion of the 20X20. I used NEMA 17 stepper motors with GT2 pulleys. This was designed on Fusion360
Lead 1510
Customised Lead 1010 making it a 1510. T-Track work area with dual Y limit switches for auto-squaring. Powered by xPro v5 & CNC.js
Lead 1515 tilting table and vertical table accessory
I wanted a CNC machine that was able to do dovetails and other box joints. I also wanted to have it be able to tilt so it would take up less space when I was working on other projects.